ADA INSTRUMENTS CUBE 360-2V GREEN Manuale utente

Laser level

Manufacturer: ADA Instruments Address: www.adainstruments.com

OPERATING MANUAL

CUBE 360-2V

2English

3 4

Vercal Line

360 eHorizontal Line

Laser level ADA CUBE 360-2V is an up-to-date functional and multi-prism

device designed for indoor and outdoor performance.

SPECIFICATIONS

Laser beam .....................................................

Horizontal line 360°/2 vertical lines

Light sources ................................................. 3 laser diodes with laser emission

wave length of 638 nm

Laser safety class .......................................... Class 2, <1mW

Accuracy ........................................................... ±3mm/10m

Self-leveling range ......................................... ±4°

Operating range with/without receiver ...... 230/66 ft (70/20 m)

Power source ..................................................Li-ion battery 3.7 V /

3xAA 1,5V

/ charger

Tripod thread .................................................. 2x1/4”

Operating temperature .............................. -5°C +45°C

Weight ...............................................................1,01 lb (460 g)

*depends on illumination

APPLICATION

FUNCTIONAL DESCRIPTION

1. 360

horizontal line and 2 vertical laser lines.

2. Quick self-leveling: when line accuracy is out of the range the laser

line ashes and the warning sound is produced.

3. Compensator locking system for safe transportation.

4. Intermediate compensator locking system for slope operation.

5. Indoor and outdoor performance function.

English

LASER LINES

FEATURES

1. Vertical laser beam (V) / Horizontal laser beam (H)

2. Detector mode

3. Battery compartment

4. Tripod mount 1/4’’

5. Compensator switch (ON/X/OFF)

6. Vertical laser window

7. Horizontal laser window

8. Power socket

SAFETY INSTRUCTIONS

• Please follow up instructions given in operating manual.

• Do not stare into beam. Laser beam can lead to eye injury (even from

greater distances).

• Do not aim laser beam at persons or animals.

• The laser plane should be set up so that the beam path is not at normal

eye level.

• Use the instrument for measuring jobs only.

• Do not open instrument housing. Repairs should be carried out by

authorized workshops only. Please contact your local dealer.

• Do not remove warning labels or safety instructions.

• Keep instrument away from children.

• Do not use instrument in explosive environment.

OPERATION

Cube 360-2V is a reliable and convenient tool. It will be irreplaceable in

strument for many years.

1. Before use, remove battery compartment cover. Insert three batteries

into battery compartment with proper polarity, then put the cover back.

WARNING: Never use charger for ordinary batteries. Do not leave

the instrument unattended while using charger. Parameters of the

charger must correspond to the parameters of domestic electricity.

Output voltage must be no more than 5V.

2. Set the compensator locking grip (5) into ON position. Horizontal beam is ON.

English

If the switch is ON, that means the power is on and the compensator is working.

If the switch (5) is in intermediate position, that means the power is opened,the

compensation is still locked, but it will not warn if you issue the slope. It’s

the hand-mode. If the switch (5) is OFF, that means that the instrument is

o, the compensator is also locked.

3. Press button (1) to switch the vertical and horizontal beams on. Press

button (1) once again to switch 2 vertical beam son. Press button (1) to switch

the horizontal and vertical beams on. Switch on only necessary laser lines

in order to save battery life.

4. Press button (2). The mode “outside” is activated. Press button (2) once

again. The tool begins to operate in “inside” mode. Use the detector of laser

beam for this mode. See the operating manual for the operation with detector.

TO CHECK THE ACCURACY

TO CHECK THE ACCURACY OF LINE LASER LEVEL (SLOPE OF PLANE)

Place laser level on the tripod 5m away from the wall so the horizontal laser

line will be directed to the wall. Switch on the power. The instrument starts

to self-level. Mark point A on the wall to show the contact of laser beam with

the wall. Turn the instrument by 90° and mark points В, С, D on the wall.

Measure distance “h” between the highest and lowest points (these are A

and D points in the picture). If “h”is ≤ 6 mm, the measurement accuracy is

good. If “h” exceeds 6 mm, apply service center.

TO CHECK PLUMB

Choose a wall and set laser 5m away from the wall. Mark point A on the

wall, please note the distance from point A to ground should be 3m. Hang

a plumb line from A point to ground and nd a plumb point B on ground.

turn on the laser and make the vertical laser line meet the point B, along

the vertical laser line on the wall and measure the distance 3m from point

B to another point C. Point C must be on the vertical laser line, it means the

height of C point is 3m.

Measure the distance from point A to point C, if the distance is over 2 mm,

please, contact with seller to calibrate the laser.

English

6English

CARE AND CLEANING

Please handle measuring instrument with care. Clean with soft cloth only

after any use. If necessary damp cloth with some water. If instrument is

wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport

in original container/case only.

Note: During transport On/O compensator lock (5) must be set to posi-

tion “OFF”. Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• Measurements through glass or plastic windows;

• Dirty laser emitting window;

• After instrument has been dropped or hit. Please check the accuracy.

• Large uctuation of temperature: if instrument will be used in cold

areas after it has been stored in warm areas (or the other way round)

please wait some minutes before carrying out measurements.

ELECTROMAGNETIC ACCEPTABILITY (EMC)

• It cannot be completely excluded that this instrument will disturb

other instruments (e.g. navigation systems);

• will be disturbed by other instruments (e.g. intensive electromagnet-

ic radiation nearby industrial facilities or radio transmitters).

LASER CLASS 2 WARNING LABELS ON THE LASER INSTRUMENT

LASER CLASSIFICATION

The instrument is a laser class 2 laser product accortding to DIN IEC

60825-1:2007. It is allowed to use unit without further safety precautions.

7English

WARRANTY

This product is warranted by the manufacturer to the original purchaser to

be free from defects in material and workmanship under normal use for a

period of two (2) years from the date of purchase.

During the warranty period, and upon proof of purchase, the product will

be repaired or replaced (with the same or similar model at manufactures

option), without charge for either parts of labour.

In case of a defect please contact the dealer where you originally pur-

chased this product. The warranty will not apply to this product if it has

been misused, abused or altered. Withiut limiting the foregoing, leakage

of the battery, bending or dropping the unit are presumed to be defects

resulting from misuse or abuse.

EXPETIONS FROM RESPONSIBILITY

The user of this product is expected to follow the instructions given in

operating manual. Although all instruments left our warehouse in perfect

condition and adjustment the user is expected to carry out periodic checks

of the product’s accuracy and general performance.

The manufacturer, or its representatives, assumes no responsibility of re-

sults of a faulty or intentional usage or misuse including any direct, indi-

rect, consequential damage, and loss of prots. The manufacturer, or its

representatives, assumes no responsibility for consequential damage, and

loss of prots by any disaster (earthquake, storm, ood ...), re, accident,

or an act of a third party and/or a usage in other than usual conditions.

The manufacturer, or its representatives, assumes no responsibility for

any damage, and loss of prots due to a change of data, loss of data and

interruption of business etc., caused by using the product or an unusable

product. The manufacturer, or its representatives, assumes no responsi-

bility for any damage, and loss of prots caused by usage other than ex-

plained in the operating manual.

The manufacturer, or its representatives, assumes no responsibility for

damage caused by wrong movement or action due to connecting with oth-

er products.

WARRANTY DOESN’T EXTEND TO FOLLOWING GASES:

1. If the standard or serial product number will be changed, erased, re-

moved or wil be unreadable.

2. Periodic maintenance, repair or changing parts as a result of their nor-

mal runout.

3. All adaptations and modications with the purpose of improvement

and expansion of normal sphere of product application, mentioned in the

service instruction, without tentative written agreement of the expert pro-

vider.

4. Service by anyone other than an authorized service center.

5. Damage to products or parts caused by misuse, including, without lim-

itation, misapplication or negligence of the terms of service instruction.

6. Power supply units, chargers, accessories, wearing parts.

7. Products, damaged from mishandling, faulty adjustment, maintenance

with low-quality and non-standard materials, presence of any liquids and

foreign objects inside the product.

8. Acts of God and/or actions of third persons.

9. In case of unwarranted repair till the end of warranty period because

of damages during the operation of the product, it’s transportation and

storing, warranty doesn’t resume.

English

Russian

ПРИМЕНЕНИЕ

Лазерный нивелир ADA CUBE 360-2V - это современный,

функциональный, мультипризменный прибор, предназначенный

для работ внутри помещений и на улице. Данный лазерный нивелир

генерирует видимый лазерный луч, позволяющий проводить

следующие измерения: измерение высот, проверка горизонтальных

и вертикальных плоскостей, прямых углов, вертикальности

установки и т.д.

Лазерный нивелир используют при работах внутри помещений

для установки нулевых отметок, разметки стяжек, установки

“маячков”, направляющих под различные панели, укладку плитки

и т.п. Лазерный нивелир часто используется для разметки при

установке мебели, полок, зеркал и пр. Лазерный инструмент также

мождет быть использован при наружных работах на дистанциях, не

превышающих его технические характеристики.

ТЕХНИЧЕСКИЕ ДАННЫЕ

Лазерный луч .............................................. горизонтальная линия 360°/2

вертикальные линии

Лазерные излучатели ............................

3 лазерных диода с длинной

волны лазерного излучения 638 nm

Класс лазера ................................................. Класс 2, <1мВт

Точность ......................................................... ±3мм/10м

Диапазон самовыравнивания ........... ±4°

Рабочий диапазон

(с приемником/без приемника)* ...... 70/20 м

Источник питания ..................................

L i - i o n а к к у м у л я т о р 3 . 7 В

/ 3xAA 1,5В / блок питания 5В

Резьба под штатив .................................... 2x1/4”

Рабочий диапазон температур .......... -5°C +45°C

Вес ....................................................................... 460 гр

*зависит от освещения

10 Russian

ФУНКЦИОНАЛЬНЫЕ ХАРАКТЕРИСТИКИ ПРИБОРА

Прибор излучает 2 вертикальные и одну горизонтальную линии.

Быстрое самовыравнивание: лазерный луч мигает и подается

предупреждающий звуковой сигнал, когда прибор отклонен на угол,

выходящий за диапазон выравнивания.

Блокировка компенсатора для безопасной транспортировки.

Промежуточная блокировка компенсатора для работы под наклоном.

Функция работы внутри помещения/ на улице.

ЛАЗЕРНЫЕ ПЛОСКОСТИ

СВОЙСТВА

1. Кнопка включения вертикального (V) / горизонтального (Н)

лазерного лучей

2. Кнопка включения режима работы с детектором

3. Батарейный отсек

4. Резьба 1/4’’

5. Ручка блокировки компенсатора (ON/X/OFF)

6. Вертикальное окно лазера

7. Горизонтальное окно лазера

8. Разъем для подключения блока питания

ИНСТРУКЦИЯ ПО БЕЗОПАСНОСТИ

• Пожалуйста, следуйте инструкциям, которые даны в руководстве

пользователей.

• Не смотрите на лазерный луч. Лазерный луч может повредить

глаза, даже если вы смотрите на него с большого расстояния.

• Не направляйте лазерный луч на людей или животных.

Altri manuali per CUBE 360-2V GREEN

Indice

Altri manuali ADA INSTRUMENTS Livello laser

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit 30 Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS 2D Basic Level Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS ROTARY 500 HV SERVO Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS 6D SERVOLINER GREEN Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS ProLevel 40 Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE 360-2V GREEN Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE MINI Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS 6D SERVOLINER GREEN Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS 3D Liner 2V Green Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS Eco 2D Pro Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE 2-360 GREEN Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit 30 Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS ADA BASIS Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit Mini Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS BASIS Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS 6D SERVOLINER Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS TOPLINER 3-360 Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS ROTARY 400 HV Servo Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS 6D SERVOLINER Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS ULTRALiner 360 2V Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS TOPLINER 3-360 GREEN Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS LASERTANK 3-360 GREEN Manuale utente

ADA INSTRUMENTS

ADA INSTRUMENTS 3D Liner 2V Green Manuale utente

Manuali Livello laser popolari di altre marche

Nedo

Nedo ET-5 Manuale utente

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manuale utente

LaserLiner

LaserLiner X2-Laser Manuale utente

Spectra

Spectra LL300N Manuale utente

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manuale utente

Nedo

Nedo Crossliner 4 Manuale utente

Lasertec

Lasertec FX360G Manuale utente

Flex

Flex ALC 8 Manuale utente

Black & Decker

Black & Decker LZR5 Manuale utente

Johnson

Johnson 40-6692 Manuale utente

Cocraft

Cocraft HL 20-SG Manuale utente

Zircon

Zircon iLine Manuale utente

HWH

HWH 310 SERIES Manuale utente

Leica

Leica iCON robot 60 Manuale utente

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manuale utente

LaserLiner

LaserLiner ActiveFinder XP Manuale utente

DeWalt

DeWalt DW082 Manuale utente

imex

imex EL20 Manuale utente