Adaptec 2100S - SCSI RAID Controller Guida di sicurezza

STORAGE MANAGEMENT

SOFTWARE USER’SGUIDE

DAPTEC

ATA RAID 2400A

DAPTEC

SCSI RAID 2100S/3200S/3210S/3400S/3410S

Adaptec

Storage Management Software

User’s Guide

reproduced, stored in a retrieval system, or transmitted in any form or by any means,

electronic, mechanical, photocopying, recording or otherwise, without the prior

written consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035.

Trademarks

Adaptec and the Adaptec logo are trademarks of Adaptec, Inc., which may be

registered in some jurisdictions. Windows 95, Windows 98, Windows Me,

Windows NT, and Windows 2000 are trademarks of Microsoft Corporation in the US

and other countries, used under license.

All other trademarks are the property of their respective owners.

Changes

The material in this document is for information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, Adaptec, Inc. assumes no liability resulting from

errors or omissions in this document, or from the use of the information contained

herein.

Adaptec reserves the right to make changes in the product design without reservation

and without notification to its users.

Disclaimer

IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE

PERMISSION FROM THE COPYRIGHT OWNER OF THE MATERIALS TO AVOID

VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER

REMEDIES.

Adaptec Software License Agreement

PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE

SOFTWARE LICENSE TERMS OF ADAPTEC, INC. AND OTHER LICENSORS

WHOSE SOFTWARE MAY BE BUNDLED WITH THIS PRODUCT.

BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU

AGREE TO THE LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT

SOFTWARE, AS SET FORTH DURING THE INSTALLATION PROCESS. IF YOU DO

NOT AGREE TO THE LICENSE TERMS APPLICABLE TO THE SOFTWARE, YOU

MAY RETURN THE ENTIRE UNUSED PRODUCT FOR A FULL REFUND.

(Single User, Non-Networked Applications)

In return for acquiring a license to use the Adaptec software, which may include

software from third party licensors and patches made available by Adaptec

(“Software”), and the related documentation, you agree to the following terms and

conditions:

1. License. This Agreement grants you, the Licensee, a license to:

a. Use the Software on a single computer system, which is not intended for use

by more than five (5) users; and:

b. Make one copy of the Software in machine readable form solely for back-up

purposes, provided you reproduce Adaptec's copyright proprietary legends.

Notwithstanding the foregoing, the Software may be used on the home, laptop

or other secondary computer of the principal user of the Software, and an

additional copy of the Software may be made to support such use. As used in

this license, the Software is “in use” when it is either loaded into RAM or

installed on a hard disk or other permanent memory device. The Software may

be “in use” on only one computer at any given time. (Different license terms

and fees are applicable for networked or multiple user applications.) As a

specific condition of this license, you agree to use the Software in compliance

with all applicable laws, including copyright laws, and that you will not copy,

transmit, perform or distribute any audio or other content using the Software

without obtaining all necessary licenses or permissions from the owner of the

content.

2. Restrictions. You may not distribute copies of the Software to others or

electronically transfer the Software from one computer to another over a network.

You may not post or otherwise make available the Software, or any portion

thereof, in any form, on the Internet. You may not use the Software in a computer

service business, including in time sharing applications. The Software contains

trade secrets and, in order to protect them, you may not decompile, reverse

engineer, disassemble, or otherwise reduce the Software to a human-perceivable

form. YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN,

RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE

WORKS BASED UPON THE SOFTWARE OR ANY PART THEREOF.

3. Ownership of Software. As Licensee, you own the media upon which the software

is recorded or fixed, but Adaptec and its licensors retain title and ownership of the

Software recorded on the original media and all subsequent copies of the

Software, regardless of the form or media in which or on which the original and

other copies may exist. This license is not a sale of the Software or any copy.

4. Confidentiality. You agree to maintain the Software in confidence and that you

will not disclose the Software to any third party without the express written

consent of Adaptec. You further agree to take all reasonable precautions to

preclude access of unauthorized persons to the Software.

5. Term. This license is effective until January 1, 2045, unless terminated earlier. You

may terminate the license at any time by destroying the Software (including the

related documentation) together with all copies or modifications in any form.

Adaptec will have the right to terminate our license immediately if you fail to

comply with any term or condition of this Agreement. Upon any termination,

including termination by you, you must destroy the Software (including the

related documentation), together with all copies or modifications in any form.

6. Special Terms Applicable to Databases. Where a database is included with the

Software, you acknowledge that it is licensed only in connection with the use of

the Software to perform disc creation, and that the database and all data derived

therefrom must be maintained in confidence in accordance with the provisions of

Section 4. This license does not grant you any rights to distribute or disclose such

database or data.

7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon

which the Software is furnished will be free from defects in material or

workmanship under normal use and service for a period of thirty (30) days from

the date of delivery to you. ADAPTEC AND ITS LICENSORS DO NOT AND

CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN

BY USING THE SOFTWARE OR DOCUMENTATION. THE FOREGOING

STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS

LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR THE

FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS MAKE

NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT

LIMITED, AS TO NON-INFRINGEMENT OF THIRD PARTY RIGHTS,

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states

do not allow the exclusion of implied warranties or limitations on how long an

implied warranty may last, so the above limitations may not apply to you. This

warranty gives you specific legal rights and you may also have other rights which

vary from state to state.

8. The entire liability of Adaptec and its licensors, and your exclusive remedy for a

breach of this warranty, shall be:

a. The replacement of any media not meeting the above limited warranty which

is returned to Adaptec; or:

b. if Adaptec or its distributor is unable to deliver replacement media which is

free from defects in materials or workmanship, you may terminate this

Agreement by returning the Software and your money will be refunded.

9. Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE

LIABLE TO YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT

DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF

DATA, EVEN IF ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER

PARTY. Some states do not allow the exclusion or limitation of special, incidental,

or consequential damages, so the above limitation or exclusion may not apply to

you.

10. Export. You acknowledge that the laws and regulations of the United States and

other countries may restrict the export and re-export of the Software. You agree

that you will not export or re-export the Software or documentation in any form in

violation of applicable United States and foreign law.

11. Government Restricted Rights. The Software is subject to restricted rights as

follows. If the Software is acquired under the terms of a GSA contract: use,

reproduction or disclosure is subject to the restrictions set forth in the applicable

ADP Schedule contract. If the Software is acquired under the terms of a DoD or

civilian agency contract, use, duplication or disclosure by the Government is

subject to the restrictions of this Agreement in accordance with 48 C.F.R. 12.212 of

the Federal Acquisition Regulations and its successors and 49 C.F.R. 227.7202-1 of

the DoD FAR Supplement and its successors.

12. General. You acknowledge that you have read this Agreement, understand it, and

that by using the Software you agree to be bound by its terms and conditions. You

further agree that it is the complete and exclusive statement of the agreement

between Adaptec and you, and supersedes any proposal or prior agreement, oral

or written, and any other communication between Adaptec and you relating to

the subject matter of this Agreement. No additional or any different terms will be

enforceable against Adaptec unless Adaptec gives its express consent, including

an express waiver of the terms of this Agreement, in writing signed by an officer

of Adaptec. You assume full responsibility for the use of the Software and agree to

use the Software legally and responsibly. This Agreement shall be governed by

California law, except as to copyright matters, which are covered by Federal law.

This Agreement is deemed entered into at Milpitas, California by both parties.

Should any provision of this Agreement be declared unenforceable in any

jurisdiction, then such provision shall be deemed severable from this Agreement

and shall not affect the remainder hereof. All rights in the Software not specifically

granted in this Agreement are reserved by Adaptec.

Should you have any questions concerning this Agreement, you may contact Adaptec

by writing to:

Adaptec, Inc.

Legal Department

691 South Milpitas Boulevard

Milpitas, California 95035.

vii

Contents

1 Storage Management Software Overview

2 Storage Manager on ROM

Overview 2-2

Keyboard Reference 2-3

Menu Control 2-3

Left Pane – Tree View Control 2-4

Right Pane – Information View Control 2-4

Menu Reference 2-4

File 2-4

RAID 2-5

Action 2-5

Help 2-5

Icon Reference 2-6

Screen Layout 2-6

The Menu Bar 2-7

The Left Pane – Tree View 2-7

The Right Pane – Information View 2-8

Running SMOR 2-9

Information and Configuration Views 2-10

Controller BIOS Settings 2-10

Information Tab 2-13

Configuration Tab 2-15

Bus Configuration Tab 2-17

Device Information Tab 2-20

Array and Array Group Information 2-23

Setting the Configuration 2-25

Array Operations 2-26

Creating an Array 2-26

Creating a Multilevel RAID 2-28

Deleting an Array 2-29

Hot Spares 2-30

Rebuilding a Failed Array 2-31

Formatting a Drive – SCSI only 2-31

Upgrading Firmware – Flash HBA Option 2-32

Creating a SMOR Boot Disk 2-34

viii

Contents

3 Storage Manager

Introduction 3-2

System Requirements 3-3

Installing Storage Manager 3-4

Running Storage Manager 3-5

Using Storage Manager Locally 3-6

Using Storage Manager Remotely 3-6

Views 3-6

Physical Configuration View 3-6

Logical Configuration View 3-8

Logical Device Addresses 3-10

Array Groups 3-12

Status Reporting 3-23

Information Windows 3-24

Host Bus Adapter Information Window 3-24

Battery Backup Configuration Window – Adaptec 3200S/

3210S/3400S/3410S Only 3-26

Configure Host Bus Adapter Window 3-27

Flash Configuration Window 3-29

Device Information Window 3-31

Device Configuration Window 3-33

Saving the Subsystem Configuration 3-34

Events 3-35

Event Log 3-35

Event Broadcaster 3-37

Event Messaging by Pager – Windows 2000 and

Windows NT only 3-43

Formatting Drives – SCSI only 3-44

Drive Failures 3-45

Audible Alarm (SCSI Only)3-45

Rebuilding a Degraded Array 3-46

Assigning Hot Spares 3-47

Running a Verify Process 3-48

Background Task Priority 3-48

Controller I/O Statistics 3-49

Cache Statistics 3-51

Command Statistics 3-51

Device I/O Statistics 3-51

Remote Communication 3-54

Connecting Across a Network 3-55

Installation and Configuration 3-55

Contents

4 RAIDUTIL Command Line Utility

Introduction 4-1

Exit Status 4-2

Device Address Syntax 4-2

Command Line Switches 4-3

Miscellaneous 4-4

Logical Drive Creation and Deletion 4-4

Array Modification 4-6

RAID Operation 4-7

Controller-Specific 4-8

Hot Spare Control 4-9

General Information and Feedback 4-10

ASNMP

Introduction A-1

Management Information Base A-2

Management Console A-2

Adaptec MIB Information A-3

SNMP A-5

What’s Included A-5

System Requirements A-6

Management Consoles A-6

Installing Adaptec SNMP Support A-6

Installing SNMP for Windows NT and

Windows 2000 A-7

Installing SNMP for Windows 95 A-7

Installing SNMP for Windows 98/Me A-7

Installing the MIB A-8

SNMP Architecture A-8

Adaptec SNMP Subagent A-9

Adaptec SNMP Trap Broadcaster Module A-9

BDMI

Introduction B-1

System Requirements B-2

Adaptec CI B-2

Installing DMI Support B-3

Adaptec DMI Modules B-3

DMI-Specific Files B-4

1-1

Storage Management

Software Overview

Your Adaptec RAID controller includes the following software tools

to manage your storage subsystem:

■Storage Manager Pro—The graphical user interface (GUI)

through which you interact with the storage subsystem. It

provides an intuitive graphical interface that enables you to do

such things as create and manage RAID arrays, set up security

levels for users and administrators, establish the means of

notifying users of disk failures, etc. Storage Manager Pro is

supported under the following operating systems:

■Windows 2000, Windows NT 4.0, Windows 95/98

■Novell NetWare 4.2; 5.x

■Red Hat Linux 6.x, 7.0

■FreeBSD

Storage Manager Pro is Adaptec’s primary RAID management

tool. For details, refer to the Storage Manager Pro User’s Guide.

Altri manuali per 2100S - SCSI RAID Controller

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Adaptec Hardware per computer

Adaptec

Adaptec DuraStor 7200S Manuale utente

Adaptec

Adaptec AAR-1220SA Manuale di istruzioni

Adaptec

Adaptec 7210S Manuale per l'uso e la cura

Adaptec

Adaptec ACB-232XD Manuale utente

Adaptec

Adaptec AHA-1520 Manuale utente

Adaptec

Adaptec AAR-1220SA Manuale di istruzioni

Adaptec

Adaptec ATA II 1220SA Manuale utente

Adaptec

Adaptec Series 6 Guida di riferimento

Adaptec

Adaptec 2100S - SCSI RAID Controller Manuale utente

Adaptec

Adaptec RAID 3085 Manuale utente

Adaptec

Adaptec RAID Solutions Manuale

Adaptec

Adaptec GDT6111RP Manuale utente

Adaptec

Adaptec 2010S - SCSI RAID Storage Controller Guida di sicurezza

Adaptec

Adaptec 9110G Manuale utente

Adaptec

Adaptec 6405 Manuale utente

Adaptec

Adaptec 2045 Manuale utente

Adaptec

Adaptec RAID 5405Z Manuale utente

Adaptec

Adaptec ASA-7211C Manuale utente

Adaptec

Adaptec AFM-600 Manuale utente

Adaptec

Adaptec 2045 Manuale utente

Adaptec

Adaptec ACB-2370 Manuale utente

Adaptec

Adaptec 1200A Manuale utente

Adaptec

Adaptec RAID 2405 Manuale utente

Adaptec

Adaptec AUA-3100LP Manuale

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente