Adaptec AAR-1220SA Manuale di istruzioni

--------------------------------------------------------------------------------

Release notes for the AAR-1220SA SATA HostRAID dated: September 29, 2006

--------------------------------------------------------------------------------

This release notes contains the following:

1. Description of the release

2. Supported hardware

3. Supported Operating Systems

4. Major functional changes

5. Prerequisites of using the Software

6. Tested Configuration

7. Known Issues

8. Windows registry Parameters

1. Description of the Release:

---------------------------------

Date of release: September 29, 2006

This is the official software release containing the list of software components

listed in the section 3 of the release note.

2. Supported Hardware:

--------------------------

The software release supports the following hardware listed below:

a. Adaptec AAR-1220SA SATA HostRAID controller

3. Supported Operating Systems:

------------------------------------

Windows Driver 32-bit and 64-bit (AMD & EM-64T) - 1.4-0 Build 12047

- Windows 2000 Server, Advanced Server, Professional

- Windows 2003 Server, Standard, Enterprise, Web Edition, x64 Edition

- Windows XP Professional, x64 Edition

Linux Driver - 1.4-0 Build 12047

- Red Hat Enterprise Linux 3.0, IA-32 and x64

- Red Hat Enterprise Linux 4.0, IA-32 and x64

- SUSE Linux Enterprise Server 9.0, IA-32 and x64

- SUSE Linux Enterprise Server 10.0, IA-32 and x64

Netware Driver - 1.4-0 Build 12047

- Netware 6.5 SP5

3.1 Adaptec Storage Manager:

---------------------------------

Adaptec Storage Manager and HRCONF - 4.30 Build 16042

Supported OS:

- Windows IA-32 and x64

- Linux IA-32 and x64

- Netware 6.5

3.2 BIOS and DOS Tools:

----------------------------

1. Expansion ROM BIOS for 1220SA - 5.0-0 Build 2227

2. Adaptec Flash Utility (AFU.EXE) for 1220SA - 5.0-0 Build 2227

4. Major Functional changes:

--------------------------------

1. Support for Medium Error handling from the drives.

2. SATA Tape and CD ROM support.

5. Prerequisites of Using the Software:

-------------------------------------------

- BIOS and the driver should use above stated software version.

6. Tested Configuration:

---------------------------

The software was tested with the Hardware Supported list on the motherboard with

the IBM PC/AT compatible PCI-x platforms. These are the various components used

during the testing:

- IBM x86 PC/AT compatible platform with Intel Xeon

- Tested with direct attached SATA-I and SATA-II drives

- Adaptec Storage Enclosure 335SAS enclosures with SATA drives

7. Known Issues/Limitations:

--------------------------------

7.1 Windows

- All Windows

Drive Letter may disappear after Medium Error on a Simple Volume

On a simple volume with Medium error, the error is reported to the Windows OS.

All the error handling is done by the operating system. The expected behavior

is intermittent and some times drive letter disappear.

- OS Caching cause invalid data in file copy from Medium Error locations in

specific conditions

When read medium error occur in simple volume or RAID-0 or a good member of a

degraded RAID-1/RAID-10, file copy in Windows Explorer will fail the first few

times but will pass on the later attempts; however, the file gets copied has

invalid data in the section where the medium error was. This happens because of

the Windows OS caching invalid data.

7.2 Netware 6.5

- Netware 6.5 SP5

Driver Fails to load if OS is installed in onboard IDE/SATA drive

Reason: IDE Driver takes over the control by default

Work Around: Remove loading of multiple IDEATA.HAM by modifying Startup.ncf,

and reboot. (ADPml00709)

7.3 Linux

- Red Hat Enterprise Linux 4 QU3 (64-bit)

Compatibility issue with Supermicro X6DHE-G Server

Supermicro X6DHE-G Server has a problem with RHEL4 QU3/64 Bit. The system hung

when "formatting /boot file system...", and installation failed.

This issue happens even with IDE drives, and without Adaptec HostRAID

controllers present in the server. (ADPml00943)

8. Windows REGISTRY PARAMETERS:

----------------------------------------------

8.1 Driver Specific Registry Parameters

WARNING: Altering or adding these driver parameters incorrectly can render your

system inoperable. Use them with caution.

Follow the instructions below to enter registry values that affect the

configuration information for the ADP3132 driver. Note that all HostRAID

adapters supported by the installed driver are affected by the values you enter

here.

The key used for this HostRAID release is "ADP3132". To enter driver-specific

parameters, follow these steps:

1) Select Run from the Start button.

2) Type "regedt32" and press Enter.

3) Open the registry list to the following location:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ADP3132

If the \Parameters\Device\ keys already exist, skip to step 6 to begin entering

parameters. If the keys do not yet exist, follow steps 4 and 5 to create them.

4) Click on the ADP3132 key. Select "New -> Key" from the Edit menu, type

"Parameters" in the "New Key #1" edit box, and press Enter.

5) Click on the Parameters key. Select the "New -> Key" from the Edit menu, type

"Device" in the "New Key #1" edit box, and press Enter. To specify a specific

host adapter, append Device with the number of the host adapter. For example,

type "Device0" for the first host adapter, "Device1" for the second, etc. If you

omit the host adapter number, the configuration information will apply to all

supported host adapters.

6) Go to the Parameters\Device key. Select "New -> String Value" from the Edit

menu, type "DriverParameters" in the "New Value #1" box, and press Enter twice.

The Edit String text box appears. Enter valid parameters in the text box. Use a

semicolon to separate multiple parameters. For example:

<Parameter1>=<Value1>;<Parameter2>=<Value2>;

MaximumSGList=17;PK=1;

NOTE: Changes made with the Registry Editor do not take effect until you reboot

your computer.

----------------------------------------------------------------

Option: Performance/Compatibility Settings

Definition: This registry option tunes the setting for performance purpose. This

registry option modifies the maximum number of I/Os and maximum number of

scatter gather elements or number of physical breaks. The setting can be set as

high or normal. When set to high it modifies the maximum I/Os to 255 and maximum

scatter gather list to 33. In this mode, system hibernation may not work. Use

the following parameter and value to modify the driver behavior.

To run driver in high performance:

Use the registry file HIGHPERF.REG.

To run driver in normal mode:

Use the registry file WHQL.REG.

Follow these steps to change the settings:

1) Select Run from the Start button.

2) Browse to the folder containing above mentioned version of the HostRAID

driver, select file "HIGHPERF.REG" or "WHQL.REG" and click OK.

NOTE: The default value for this parameter is normal mode and it supports system

hibernation.

Possible Values: Normal Mode - High Performance Mode

Default Value: Normal Mode

----------------------------------------------------------------

Option: ExposeEnclosure

Definition: This registry option changes the appearance of enclosure management

devices to the operating system. One can directly edit the registry and apply

the required changes to this option as explained in section 8.1.

There is another way to reflect expose enclosure change using the

"ENCLOSURE.REG" file. Follow these steps to change the settings:

1) Select Run from the Start button.

2) Browse to the folder containing above mentioned version of the HostRAID

driver, select file "ENCLOSURE.REG" and click OK.

Note: If you use the second option to expose enclosure, then use the

"Performance/Compatibility Settings" option to bring driver to Normal Mode using

"WHQL.REG" file.

Possible Values: 0-1 (0=do not expose enclosure, 1=expose enclosure)

Default Value: 0

----------------------------------------------------------------

8.2 Windows Specific Registry Parameters

NOTE: This setting applies to Windows Server 2003, Windows 2000, and Windows XP.

The only Windows-specific parameter that you can currently change is the

TimeOutValue. This registry option increases the timeout for all disk class

devices (in contrast to the driver-specific registry parameters that affect only

your HostRAID adapter).

The default TimeOutValue is 10 seconds. Follow these steps to increase this

value to 60 seconds:

1) Select Run from the Start button.

2) Browse to the folder containing above mentioned version of the HostRAID

driver, select the file "TIMEOUT.REG"

and click OK.

Note: Changes made with the Registry Editor do not take effect until you reboot

your computer.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

This software contains the valuable trade secrets of Adaptec or its

licensors. The software is protected under international copyright

laws and treaties. This software may only be used in accordance with

the terms of its accompanying license agreement.

No part of this publication may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, recording or otherwise, without prior

written consent of Adaptec, Inc.,

691 South Milpitas Blvd.,Milpitas, CA 95035

Altri manuali per AAR-1220SA

Indice

Altri manuali Adaptec Hardware per computer

Adaptec

Adaptec ACB-232XD Manuale utente

Adaptec

Adaptec 2010S - SCSI RAID Storage Controller Guida di sicurezza

Adaptec

Adaptec SBC-596 Manuale utente

Adaptec

Adaptec PM1564U3 Manuale utente

Adaptec

Adaptec RAID Solutions Manuale

Adaptec

Adaptec RAID 2405Q Manuale utente

Adaptec

Adaptec FireWire 1394 Manuale utente

Adaptec

Adaptec RAID 5405 Manuale utente

Adaptec

Adaptec 2100S - SCSI RAID Controller Guida di sicurezza

Adaptec

Adaptec 4000SAS Manuale utente

Adaptec

Adaptec 2100S - SCSI RAID Controller Manuale utente

Adaptec

Adaptec AFM-600 Manuale utente

Adaptec

Adaptec ARO-1130CA Istruzioni di montaggio

Adaptec

Adaptec PM3754U2 Manuale utente

Adaptec

Adaptec ASR-2130SLP Come usare

Adaptec

Adaptec ACB-2370 Manuale utente

Adaptec

Adaptec 2045 Manuale utente

Adaptec

Adaptec PM1564U3 Manuale utente

Adaptec

Adaptec Series 6 Guida di riferimento

Adaptec

Adaptec ASR-3085 Manuale operativo

Adaptec

Adaptec AAA-130U2 SERIES Istruzioni di montaggio

Adaptec

Adaptec AAR-1220SA Manuale di istruzioni

Adaptec

Adaptec PowerDomain 2940UW Manuale utente

Adaptec

Adaptec 9110G Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente