Adaptec P Class 733/800/866MHz / 1GHz Manuale utente

Hewlett-Packard Company

3404 East Harmony Road

Fort Collins, Colorado 80528

HP Pub. No. A8031-90001

Read Before Installing

Adaptec SCSI RAID 2100S

HP Product No. A8031A

NOTE: The installation of the SCSI RAID card will delete data on your system. A backup will be

needed to retain any of the data stored in your current hard disks.

If you have the hp workstation x4000 recovery CD (pn A6068-92101) it does not include the SCSI RAID

driver. To install Windows 2000 you will need the updated version of the hp workstation x4000 recovery

CD (pn A6068-91018). For the updated CD please contact any support center listed in the following

URL: http://welcome.hp.com/country/us/eng/contact_us.htm.

To successfully install the Adaptec RAID card, driver and software, you will need:

1. The Adaptec RAID 2100S CD

2. The Adaptec RAID 2100S card

3. hp workstation x4000 Recovery CD

4. Adaptec RAID Installation Guide found on the Adaptec RAID 2100S CD or can also be found at

http://www.hp.com/workstations/support/documentation/win_manuals.html

NOTE: This procedure is for workstations that either do not have an operating system installed or in which a

RAID system is being created with an operating system already installed. If your operating system is already

installed, you must back up your data before proceeding with the RAID installation procedure.

For a detailed description of the installation process, refer to the Adaptec RAID Installation Guide.

Hardware Installation

1. Turn off your workstation and remove the power cord from the back.

2. Remove the side cover.

3. Disconnect the SCSI cable from the system board.

4. Install the RAID card in any of the three 33MHz slots closest to the processor.

5. Connect the SCSI cable to the SCSI RAID card.

6. Reinstall the side cover and connect power cord to your workstation.

01/29/02

A8031- 90001

RAID Conﬁguration

1. Turn on your system and press ESC to remove the hp splash screen.

2. Enter the Adaptec setup utility (SMOR), after the Adaptec banner appears press CRT+A when prompted.

NOTE: To navigate the SMOR menu use the arrow and/or TAB keys to move between ﬁelds.

3. Select the RAID 2100s controller.

4. Check for two or more available drives to create the RAID array.

5. Open the RAID menu by pressing ALT+R (ALT+RAID) and select Create, then press Enter.

6. Select the RAID type (0or 1(1is the default)). Select OK to exit the screen.

7. Select at least two open devices. (Use the up/down arrow keys to select the device names then press Enter.)

Selected devices are checkmarked before the device name.

8. Select Done when ﬁnished. If a Build Option appears, follow the instructions. The Build Option will not

appear for RAID 0.

9. Press Alt+F and select Set System Configuration to save your new conﬁguration.

Operating System Installation

1. Insert into the CD drive the hp x4000 system recovery CD.

2. Press ALT+F to exit the SMOR utility and reboot the system.

3. When prompted press F12 to reboot from the CD.

4. Select Recover your software (Windows 2000) and follow the screen instructions to install Windows

2000.

Note: A message will appear that the drive needs to be repartitioned. The operating system will automatically

do this process as part of the recovery and installation.

Installing the Storage Manager application

1. Insert the Adaptec RAID 2100s CD in the drive.

2. Open the directory Str_manager double-click the Setup.exe icon and follow the instructions.

For more information on using Storage Manager, please refer to the Storage Manager Software Guide located on

the CD.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Adaptec Hardware per computer

Adaptec

Adaptec GDT8114RZ Manuale utente

Adaptec

Adaptec AUA-3100LP Manuale

Adaptec

Adaptec RAID 6405E Manuale utente

Adaptec

Adaptec 1200A Manuale utente

Adaptec

Adaptec RAID 3085 Manuale utente

Adaptec

Adaptec ATA II 1220SA Manuale utente

Adaptec

Adaptec RAID 2405Q Manuale utente

Adaptec

Adaptec 2010S - SCSI RAID Storage Controller Guida di sicurezza

Adaptec

Adaptec PM3332UW Manuale utente

Adaptec

Adaptec PowerDomain 2940UW Manuale utente

Adaptec

Adaptec ARO-1130CA Istruzioni di montaggio

Adaptec

Adaptec SAS RAID Controllers Manuale utente

Adaptec

Adaptec Serial Attached SCSI (SAS) Expander Card Manuale utente

Adaptec

Adaptec 2410SA - Serial ATA RAID Controller Manuale utente

Adaptec

Adaptec 2045 Manuale utente

Adaptec

Adaptec 2045 Manuale utente

Adaptec

Adaptec AHA-1520 Manuale utente

Adaptec

Adaptec RAID 51245 Come usare

Adaptec

Adaptec 4000SAS Manuale utente

Adaptec

Adaptec 7210S Manuale per l'uso e la cura

Adaptec

Adaptec ACB-2370 Manuale utente

Adaptec

Adaptec 2025ZCR - SCSI RAID Storage Controller Manuale utente

Adaptec

Adaptec RAID 5405Z Manuale utente

Adaptec

Adaptec AAR-1420SA Manuale di istruzioni

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente