ADB Safegate L-854 Manuale utente

L-854 Radio Control Equipment

RCE, Type I, Style A

User Manual

96A0390, Rev. K, 2019/02/01

A.0 Disclaimer / Standard Warranty

CE certification

The equipment listed as CE certified means that the product complies with the essential requirements concerning safety and

hygiene. The directives that have been taken into consideration in the design are available on written request to ADB

SAFEGATE.

ETL certification

The equipment listed as ETL certified means that the product complies with the essential requirements concerning safety and

FAA Airfield regulations. The directives that have been taken into consideration in the design are available on written request

to ADB SAFEGATE.

LED Product Guarantee

Where applicable, per FAA EB67 (applicable edition), ADB SAFEGATE L858(L) Airfield Guidance Signs are warranted against

electrical defects in design or manufacture of the LED or LED specific circuitry for a period of 4 years. ADB SAFEGATE LED light

fixtures (with the exception of obstruction lighting) are warranted against mechanical and physical defects in design or

manufacture for a period of 12 months from date of installation; and are warranted against electrical defects in design or

manufacture of the LED or LED specific circuitry for a period of 4 years per FAA EB67 (applicable edition).

Note

See your sales order contract for a complete warranty description. In some specific cases, deviations are (to be)

accepted in the contract, which will supersede the standard warranty.

Standard Product Guarantee

Products of ADB SAFEGATE manufacture are guaranteed against mechanical, electrical, and physical defects (excluding lamps)

which may occur during proper and normal use for a period of one year from the date of installation or 2 years from date of

shipment and are guaranteed to be merchantable and fit for the ordinary purposes for which such products are made. ADB

SAFEGATE L858 Airfield Guidance Signs are warranted against mechanical and physical defects in design or manufacture for a

period of 2 years from date of installation per FAA AC 150/5345-44 (applicable edition).

Note

See your sales order contract for a complete warranty description.

All Products Guarantee

LED Products of ADB SAFEGATE, manufactured and sold by ADB SAFEGATE or its licensed representatives, meets the

corresponding requirements of FAA, ICAO and IEC.

ADB SAFEGATE will correct by repair or replacement per the applicable guarantee above, at its option, equipment or parts

which fail because of mechanical, electrical or physical defects, provided that the goods have been properly handled and

stored prior to installation, properly installed and properly operated after installation, and provided further that Buyer gives

ADB SAFEGATE written notice of such defects after delivery of the goods to Buyer. Refer to the Safety section for more

information on Material Handling Precautions and Storage precautions that must be followed.

ADB SAFEGATE reserves the right to examine goods upon which a claim is made. Said goods must be presented in the same

condition as when the defect therein was discovered. ADB SAFEGATE furthers reserves the right to require the return of such

goods to establish any claim.

ADB SAFEGATE’s obligation under this guarantee is limited to making repair or replacement within a reasonable time after

receipt of such written notice and does not include any other costs such as the cost of removal of defective part, installation

of repaired product, labor or consequential damages of any kind, the exclusive remedy being to require such new parts to be

furnished.

96A0390, Rev. K, 2019/02/01 iii

ADB SAFEGATE’s liability under no circumstances will exceed the contract price of goods claimed to be defective. Any returns

under this guarantee are to be on a transportation charges prepaid basis. For products not manufactured by, but sold by ADB

SAFEGATE, warranty is limited to that extended by the original manufacturer.

This is ADB SAFEGATE’s sole guarantee and warranty with respect to the goods; there are no express warranties or warranties

of fitness for any particular purpose or any implied warranties of fitness for any particular purpose or any implied warranties

other than those made expressly herein. All such warranties being expressly disclaimed.

Liability

WARNING

Use of the equipment in ways other than described in the catalogue leaflet and the manual may result in personal

injury, death, or property and equipment damage. Use this equipment only as described in the manual.

ADB SAFEGATE cannot be held responsible for injuries or damages resulting from non-standard, unintended uses of its

equipment. The equipment is designed and intended only for the purpose described in the manual. Uses not described in the

manual are considered unintended uses and may result in serious personal injury, death or property damage.

Unintended uses includes the following actions:

•Making changes to equipment that have not been recommended or described in this manual or using parts that are not

genuine ADB SAFEGATE replacement parts or accessories.

•Failing to make sure that auxiliary equipment complies with approval agency requirements, local codes, and all applicable

safety standards if not in contradiction with the general rules.

•Using materials or auxiliary equipment that are inappropriate or incompatible with your ADB SAFEGATE equipment.

•Allowing unskilled personnel to perform any task on or with the equipment.

This manual or parts thereof may not be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, photocopying, recording, nor otherwise, without ADB SAFEGATE BVBA’s prior written consent.

This manual could contain technical inaccuracies or typographical errors. ADB SAFEGATE BVBA reserves the right to revise this

manual from time to time in the contents thereof without obligation of ADB SAFEGATE BVBA to notify any person of such

revision or change. Details and values given in this manual are average values and have been compiled with care. They are not

binding, however, and ADB SAFEGATE BVBA disclaims any liability for damages or detriments suffered as a result of reliance

on the information given herein or the use of products, processes or equipment to which this manual refers. No warranty is

made that the use of the information or of the products, processes or equipment to which this manual refers will not infringe

any third party’s patents or rights. The information given does not release the buyer from making their own experiments and

tests

L-854 Radio Control Equipment

TABLE OF CONTENTS

1.0 Safety.........................................................................................................................................................................................1

1.1 Safety Messages.......................................................................................................................................................................................................... 1

1.1.1 Introduction to Safety...................................................................................................................................................................................2

1.1.2 Intended Use.................................................................................................................................................................................................... 2

1.1.3 Material Handling Precautions: Storage................................................................................................................................................ 3

1.1.4 Operation Safety.............................................................................................................................................................................................3

1.1.5 Maintenance Safety....................................................................................................................................................................................... 3

1.1.6 Material Handling Precautions, ESD........................................................................................................................................................4

2.0 L-854 Radio Control Equipment.............................................................................................................................................5

2.1 About this manual.......................................................................................................................................................................................................5

2.1.1 How to work with the manual................................................................................................................................................................... 5

2.2 Introduction...................................................................................................................................................................................................................5

2.3 Digital Radio Control..................................................................................................................................................................................................6

2.3.1 FCC Part 15 Notice......................................................................................................................................................................................... 8

3.0 Options......................................................................................................................................................................................9

3.1 Equipment Specification Data................................................................................................................................................................................9

3.2 Radio Control Restrictions....................................................................................................................................................................................... 9

3.3 Interfacing the Radio Controller..........................................................................................................................................................................10

3.4 Intensity Control........................................................................................................................................................................................................10

4.0 Theory of Operation.............................................................................................................................................................. 13

4.1 General..........................................................................................................................................................................................................................13

4.2 Terminal Block............................................................................................................................................................................................................ 13

4.3 Control Board............................................................................................................................................................................................................. 14

4.4 Power Supply Board.................................................................................................................................................................................................15

4.5 Relay Board..................................................................................................................................................................................................................16

5.0 Installation..............................................................................................................................................................................19

5.1 Unpacking....................................................................................................................................................................................................................19

5.2 Installing L-854 Radio Control Equipment......................................................................................................................................................19

5.2.1 Remote Antenna (Option).........................................................................................................................................................................21

5.2.2 Safety Precautions........................................................................................................................................................................................22

5.2.3 Mounting Remote Antenna......................................................................................................................................................................22

6.0 Operation................................................................................................................................................................................23

6.1 Controls and Indicators.......................................................................................................................................................................................... 23

6.2 Startup Procedures...................................................................................................................................................................................................24

7.0 Maintenance........................................................................................................................................................................... 27

7.1 Introduction.................................................................................................................................................................................................................27

7.2 Receiver Frequency Setting...................................................................................................................................................................................27

8.0 Troubleshooting.....................................................................................................................................................................29

8.1 Wiring Schematics....................................................................................................................................................................................................30

8.1.1 Introduction....................................................................................................................................................................................................30

8.1.2 Wiring Diagram List.....................................................................................................................................................................................30

9.0 Parts.........................................................................................................................................................................................37

9.1 Spare Parts...................................................................................................................................................................................................................37

A.0 SUPPORT.... 39

A.1 ADB SAFEGATE website..........................................................................................................................................................................................39

A.2 Recycling......................................................................................................................................................................................................................40

A.2.1 Local authority recycling...........................................................................................................................................................................40

A.2.2 ADB SAFEGATE recycling.......................................................................................................................................................................... 40

96A0390, Rev. K, 2019/02/01 v

L-854 Radio Control Equipment

TABLE OF CONTENTS

1.0 Safety

Introduction to Safety

This section contains general safety instructions for installing and using ADB SAFEGATE equipment. Some safety instructions

may not apply to the equipment in this manual. Task- and equipment-specific warnings are included in other sections of this

manual where appropriate.

1.1 Safety Messages

HAZARD Icons used in the manual

For all HAZARD symbols in use, see the Safety section. All symbols must comply with ISO and ANSI standards.

Carefully read and observe all safety instructions in this manual, which alert you to safety hazards and conditions that may

result in personal injury, death or property and equipment damage and are accompanied by the symbol shown below.

WARNING

Failure to observe a warning may result in personal injury, death or equipment damage.

Danger - Risk of electrical shock or ARC FLASH

Disconnect equipment from line voltage. Failure to observe this warning may result in personal injury, death, or

equipment damage. ARC Flash may cause blindness, severe burns or death.

WARNING - Wear personal protective equipment

Failure to observe may result in serious injury.

WARNING - Do not touch

Failure to observe this warning may result in personal injury, death, or equipment damage.

CAUTION

Failure to observe a caution may result in equipment damage.

Qualified Personnel

Important Information

The term qualified personnel is defined here as individuals who thoroughly understand the equipment and its safe

operation, maintenance and repair. Qualified personnel are physically capable of performing the required tasks, familiar

with all relevant safety rules and regulations and have been trained to safely install, operate, maintain and repair the

equipment. It is the responsibility of the company operating this equipment to ensure that its personnel meet these

requirements.

Always use required personal protective equipment (PPE) and follow safe electrical work practice.

96A0390, Rev. K, 2019/02/01 1

1.1.1 Introduction to Safety

CAUTION

Unsafe Equipment Use

This equipment may contain electrostatic devices, hazardous voltages and sharp edges on components

• Read installation instructions in their entirety before starting installation.

• Become familiar with the general safety instructions in this section of the manual before installing,

operating, maintaining or repairing this equipment.

• Read and carefully follow the instructions throughout this manual for performing specific tasks and

working with specific equipment.

• Make this manual available to personnel installing, operating, maintaining or repairing this

equipment.

• Follow all applicable safety procedures required by your company, industry standards and

government or other regulatory agencies.

• Install all electrical connections to local code.

• Use only electrical wire of sufficient gauge and insulation to handle the rated current demand. All

wiring must meet local codes.

• Route electrical wiring along a protected path. Make sure they will not be damaged by moving

equipment.

• Protect components from damage, wear, and harsh environment conditions.

• Allow ample room for maintenance, panel accessibility, and cover removal.

• Protect equipment with safety devices as specified by applicable safety regulations

• If safety devices must be removed for installation, install them immediately after the work is

completed and check them for proper functioning prior to returning power to the circuit.

Failure to follow this instruction can result in serious injury or equipment damage

Additional Reference Materials

Important Information

•IEC - International Standards and Conformity Assessment for all electrical, electronic and related technologies.

•IEC 60364 - Electrical Installations in Buildings.

•FAA Advisory: AC 150/5340-26 (current edition), chapter 45, section 4, Maintenance of Airport Visual Aid Facilities.

•Maintenance personnel must refer to the maintenance procedure described in the ICAO Airport Services Manual,

Part 9.

•ANSI/NFPA 79, Electrical Standards for Metalworking Machine Tools.

•National and local electrical codes and standards.

1.1.2 Intended Use

CAUTION

Use this equipment as intended by the manufacturer

This equipment is designed to perform a specific function, do not use this equipment for other purposes

• Using this equipment in ways other than described in this manual may result in personal injury, death

or property and equipment damage. Use this equipment only as described in this manual.

Failure to follow this instruction can result in serious injury or equipment damage

L-854 Radio Control Equipment

Safety

1.1.3 Material Handling Precautions: Storage

CAUTION

Improper Storage

Store this equipment properly

• If equipment is to be stored prior to installation, it must be protected from the weather and kept free

of condensation and dust.

Failure to follow this instruction can result in equipment damage

1.1.4 Operation Safety

CAUTION

Improper Operation

Do Not Operate this equipment other than as specified by the manufacturer

• Only qualified personnel, physically capable of operating the equipment and with no impairments in

their judgment or reaction times, should operate this equipment.

• Read all system component manuals before operating this equipment. A thorough understanding of

system components and their operation will help you operate the system safely and efficiently.

• Before starting this equipment, check all safety interlocks, fire-detection systems, and protective

devices such as panels and covers. Make sure all devices are fully functional. Do not operate the

system if these devices are not working properly. Do not deactivate or bypass automatic safety

interlocks or locked-out electrical disconnects or pneumatic valves.

• Protect equipment with safety devices as specified by applicable safety regulations.

• If safety devices must be removed for installation, install them immediately after the work is

completed and check them for proper functioning.

• Route electrical wiring along a protected path. Make sure they will not be damaged by moving

equipment.

• Never operate equipment with a known malfunction.

• Do not attempt to operate or service electrical equipment if standing water is present.

• Use this equipment only in the environments for which it is rated. Do not operate this equipment in

humid, flammable, or explosive environments unless it has been rated for safe operation in these

environments.

• Never touch exposed electrical connections on equipment while the power is ON.

Failure to follow these instructions can result in equipment damage

1.1.5 Maintenance Safety

DANGER

Electric Shock Hazard

This equipment may contain electrostatic devices

• Do not operate a system that contains malfunctioning components. If a component malfunctions,

turn the system OFF immediately.

• Disconnect and lock out electrical power.

• Allow only qualified personnel to make repairs. Repair or replace the malfunctioning component

according to instructions provided in its manual.

Failure to follow these instructions can result in death or equipment damage

96A0390, Rev. K, 2019/02/01 3

1.1.6 Material Handling Precautions, ESD

CAUTION

Electrostatic Sensitive Devices

This equipment may contain electrostatic devices

• Protect from electrostatic discharge.

• Electronic modules and components should be touched only when this is unavoidable e.g. soldering,

replacement.

• Before touching any component of the cabinet you shall bring your body to the same potential as the

cabinet by touching a conductive earthed part of the cabinet.

• Electronic modules or components must not be brought in contact with highly insulating materials

such as plastic sheets, synthetic fiber clothing. They must be laid down on conductive surfaces.

• The tip of the soldering iron must be grounded.

• Electronic modules and components must be stored and transported in conductive packing.

Failure to follow this instruction can result in equipment damage

L-854 Radio Control Equipment

Safety

Indice

Altri manuali ADB Safegate Telecomando

ADB Safegate

ADB Safegate AGLAS-C Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione