ADB DTS Manuale utente

AM.04.510e Edition 1.5

Instruction Manual

8” Inset AD-light

Type DTS / DTC

AM.04.510e - Edition 1.5 2

This manual or parts thereof may not be reproduced, stored in a retrieval system, or transmitted,

in any form or by any means, electronic, mechanical, photocopying, recording, nor otherwise,

without ADBs prior written consent.

This manual could contain technical inaccuracies or typographical errors.

ADB reserves the right to revise this manual from time to time in the contents thereof without

obligation of ADB to notify any person of such revision or change.

Details and values given in this manual are average values and have been compiled with care.

They are not binding, however, and ADB disclaims any liability for damages or detriments

suffered as a result of reliance on the information given herein or the use of products, processes

or equipment to which this manual refers. No warranty is made that the use of the information or

of the products, processes or equipment to which this manual refers will not infringe any third

party’s patents or rights. The information given does not release the buyer from making their own

experiments and tests.

ADB Address: Leuvensesteenweg 585, B-1930 Zaventem, Belgium

Tel.: +32 2 722 17 11, Fax: +32 2 722 17 64

Email: info.adb@adb-air.com

Internet: www.adb-airfieldsolutions.com

- 4

Table of contents

1. About this manual

1.1. How to work with the manual..............................................................................................................6

1.2. Record of changes..............................................................................................................................6

1.3. Abbreviations and terms.....................................................................................................................7

1.4. Icons used in the manual....................................................................................................................7

2. Safety

2.1. Use......................................................................................................................................................8

2.2. Safety symbols....................................................................................................................................8

2.3. Skilled personnel.................................................................................................................................9

2.4. Liability................................................................................................................................................9

2.5. Installation...........................................................................................................................................9

2.6. Fasteners..........................................................................................................................................10

2.7. Operation..........................................................................................................................................10

2.8. Action in the event of an equipment malfunction..............................................................................10

2.9. Maintenance and repair ....................................................................................................................11

2.10. CE certification..................................................................................................................................11

2.11. Guarantee.........................................................................................................................................11

3. Description

3.1. Overview...........................................................................................................................................12

3.2. Intended use.....................................................................................................................................12

3.3. Monitoring (option)............................................................................................................................12

3.4. Identification on the fixture................................................................................................................12

4. Install and replace the complete fixture

4.1. Inspect on delivery............................................................................................................................14

4.2. Store..................................................................................................................................................14

4.3. Install.................................................................................................................................................14

4.4. Remove.............................................................................................................................................18

5. Maintenance

5.1. Preventive maintenance schedule....................................................................................................20

5.2. Part replacement...............................................................................................................................21

5.3. Waterproof test..................................................................................................................................28

5.4. Fixture operation test........................................................................................................................29

6. Troubleshooting

6.1. Troubleshooting guide.......................................................................................................................30

7. Technical data

7.1. Fixture code schema.........................................................................................................................32

7.2. Hardware kits....................................................................................................................................33

7.3. Exploded view and components.......................................................................................................35

7.4. Standard toolkit.................................................................................................................................37

7.5. Additional accessories......................................................................................................................38

7.6. Specifications....................................................................................................................................39

7.7. Ambient conditions............................................................................................................................39

AM.04.510e - Edition 1.5 6

About this manual

1 About this manual

The manual shows the information necessary to:

-install

- carry out maintenance

- carry out troubleshooting

on the DTS / DTC light, in the manual referred to as the fixture.

1.1 How to work with the manual

1. Familiarize yourself with the structure and content.

2. Carry out the actions completely and in the given sequence.

1.2 Record of changes

Edition Editor Check Date Description

1.0 BUG AHU,

TP, VDV 04/

201BP0 New

1.1 MA MA 12/2010 Update guarantee and company addresses

1.2 BUG LM 08/2011 New codes for spare parts - infos on adhesives

1.3 BUG LM,JBE,

GMO 09/2012 New codes for spare parts, monitoring option

added.

1.4 BUG HVE,

MA,

AHU,

LM, JBU

04/2013 Introduction of Torx screws with pre-applied Loctite,

correction of code numbers

1.5 MR MA 05/2013 Modification of the guarantee

7AM.04.510e - Edition 1.5

About this manual

1.3 Abbreviations and terms

1.4 Icons used in the manual

For all WARNING symbols, see § 2.2.

Term or abbreviation Description

AGL Airfield Ground Lighting

C/L Centre Line

DRC AD-light Runway Centre Line light

DTC AD-light Taxiway Centre Line light Curved section

DTS AD-light Taxiway Centre Line light Straight section

DTZ AD-light Touchdown Zone light

FAA Federal Aviation Administration

Fastener Generic term for an item that holds the fixture together or that holds

the fixture on its mounting support, e.g. nut, bolt, washer

FOD Foreign Object Debris

HPI Commercial name for an ADB type of 8” shallow base

ICAO International Civil Aviation Organisation

IEC International Electrical Committee

ISO International Standardization Organisation

Mounting support A piece of equipment permanently installed in the ground, on which

the fixture is installed. It can be a shallow or deep base, with or

without adapter ring.

PCB Printed Circuit Board

Toe-in The toe-in angle is the angle the beam of light makes with the

longitudinal axis of the runway or taxiway.

UNC Unified Thread Standard

CAUTION

Can cause damage to the

equipment.

NOTE

Gives further information.

TIP

Gives information on how to carry

out or to understand the

instruction or information more

easily.

AM.04.510e - Edition 1.5 8

Safety

2 Safety

Read all warnings carefully. Failure to do so may result in personal injury, death, or property

damage.

2.1 Use

To use the equipment safely:

Refer to the International Standard IEC 61820, Electrical installation for lighting and

beaconing of aerodromes - Constant current series circuits for aeronautical ground lighting -

System design and installation requirements, and to the International Standard IEC 61821,

Electrical installations for lighting and beaconing of aerodromes - Maintenance of

aeronautical ground lighting circuits for instructions on safety precautions.

See FAA Advisory Circular AC 150/5340-26, Maintenance of Airport Visual Aids Facilities,

for additional instructions on safety precautions.

Observe all safety regulations. To avoid injuries, always remove power prior to making any

wire connections and touching any live part. Refer to the International Standards IEC 61820

and IEC 61821.

In addition for a parallel power supply also take into account the International Standard IEC

60598 (for class I equipment).

Read and become familiar with the general safety instructions provided in this chapter

before you install, operate, maintain or repair the equipment.

Read and carefully follow the instructions given throughout this manual before installing,

operating, maintaining, or repairing the equipment.

Store this manual within easy reach of personnel installing, operating, maintaining or

repairing the equipment.

Follow all applicable safety procedures required by your company, industry standards, and

government or other regulatory agencies.

Obtain and read Material Safety Data Sheets (MSDS) for all materials used.

2.2 Safety symbols

Become familiar with the safety symbols presented in this chapter. These symbols will alert you

to safety hazards and conditions that may result in personal injury, death, or property and

equipment damage.

WARNING 1: Failure to observe this warning may result in personal injury, death, or

equipment damage.

WARNING 2: Risk of electrical shock. Disconnect equipment from line voltage.

Failure to observe this warning may result in personal injury, death, or equipment

damagee.

WARNING 3: Wear personal protective equipment. Failure to observe may result in

serious injury.

WARNING 4: Do not touch. Failure to observe this warning may result in personal

injury, death, or equipment damage.

9AM.04.510e - Edition 1.5

Safety

2.3 Skilled personnel

The term skilled personnel is defined here as individual who thoroughly understand the

equipment and its safe operation, maintenance, and repair. Skilled personnel are physically

capable of performing the required tasks, familiar with all relevant safety rules and regulations

and have been trained to safely install, operate, maintain, and repair the equipment. It is the

responsibility of the company operating the equipment to see that its personnel meet these

requirements.

2.4 Liability

ADB cannot be held responsible for injuries or damages resulting from non-standard, unintended

uses of its equipment. The equipment is designed and intended only for the purpose described in

the manual. Uses not described in the manual are considered unintended uses and may result in

serious personal injury, death or property damage.

Unintended uses includes the following actions:

Making changes to equipment that have not been recommended or described in this

manual or using parts that are not genuine ADB replacement parts or accessories.

Failing to make sure that auxiliary equipment complies with approval agency requirements,

local codes, and all applicable safety standards if not in contradiction with the general rules.

Using materials or auxiliary equipment that are inappropriate or incompatible with your ADB

equipment.

Allowing unskilled personnel to perform any task on or with the equipment.

2.5 Installation

Read the installation section of all system component manuals before installing your equipment.

A thorough understanding of system components and their requirements will help you install the

equipment safely and efficiently.

Allow only skilled personnel to install ADB and auxiliary equipment. Use only approved

equipment. Using unapproved equipment in an approved system may void agency

approvals and will void the warranty.

Make sure all equipment is rated and approved for the environment in which you are using

it.

Follow all instructions for installing components and accessories.

Install all electrical connections to local code provided they are not in contradiction with the

general rules.

Use only electrical wire of sufficient gauge and insulation to handle the rated current and

voltage demand. All wiring must meet local codes.

Route electrical wiring along a protected path. Make sure they will not be damaged by

moving equipment and animals (e.g. rodents).

Protect components from damage, wear, and harsh environment conditions.

Allow ample room for maintenance, panel accessibility (power products), and cover removal

(power products).

Protect equipment with safety devices as specified by applicable safety regulations.

If safety devices must be removed for installation, install them immediately after the work is

completed and check them for proper functioning.

WARNING

Use of the equipment in ways other than described in the catalogue leaflet

and the manual may result in personal injury, death, or property and

equipment damage. Use this equipment only as described in the manual.

WARNING

Failure to follow these safety procedures can result in personal injury or

death.

AM.04.510e - Edition 1.5 10

Safety

2.6 Fasteners

Example It is possible to insert a 3/8” UNC screw in a M10 threaded hole. However, such a combination

damages the female thread and does not ensure a correct fastening. The screw could loosen

under the influence of aircrafts that roll over. The use of incorrect screws can lead to either

damage to the thread in the mounting support or to an incorrect fixation of the equipment.

2.7 Operation

Only skilled personnel, physically capable of operating the equipment and with no impairments in

their judgment or reaction times, should operate this equipment.

Read all system component manuals before operating the equipment. A thorough understanding

of system components and their operation will help you operate the equipment safely and

efficiently.

Before starting this equipment, check all safety interlocks and protective devices such as

panels and covers. Make sure all devices are fully functional. Do not operate the equipment

if these devices are not working properly. Do not deactivate or bypass automatic safety

interlocks or locked-out electrical disconnects or pneumatic valves.

Never operate equipment with a known malfunction.

Do not attempt to operate or service electrical equipment if standing water is present.

Use the equipment only in the environments for which it is rated. Do not operate the

equipment in humid, flammable, or explosive environments unless it has been rated for safe

operation in these environments.

Never touch exposed electrical connections on equipment while the power is ON. Make

sure the exposed electrical connections are proven to be dead.

2.8 Action in the event of an equipment malfunction

Do not operate a system that contains malfunctioning components. If a component malfunctions,

turn the system OFF immediately.

1. Disconnect and lock out electrical power.

2. Allow only skilled personnel to make repairs. Repair or replace the malfunctioning

component according to instructions provided in its manual.

WARNING

Only use fasteners of the same type as the one originally supplied with

the equipment.

Always tighten the fasteners to the recommended torque. Use a

calibrated torque wrench and apply the recommended adhesive type.

Obey the instructions of the adhesives necessary for the fasteners.

If this is not the case, this may cause the fasteners to loosen, damage the

equipment, potentially to loosen the equipment. This can lead to a highly

dangerous situation of FOD, with potential lethal consequences.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente