ADDC MDC-SR10-V2 Manuale utente
MDC-SR10-V2
USER GUIDE
PLUG INTO THE FUTURE OF TECHNOLOGY
2
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Revision History
Revision Notes
V1.0 Revision 1.0 was published in
November of 2023.
3
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Table of Contents
Section 1 Receiving Your MDC-SR10-V2 5
Section 1.1 What's in the Box? 5
Section 2 MDC-SR10-V2 Preparation 6
Section 2.1 Preparing For Your MDC-SR10-V2 6
Section 2.2 Installing Your BioDigitalPC®s7
Section 2.3 Connect Antennas and Power On
Your MDC-SR10-V2
8
Section 3 MDC-SR10-V2 Overview 9
Section 3.1 SR-10 Module 10
Section 3.2 Side Panel 11
Section 3.3 Connect USB and Video 11
Section 3.4 Network LEDs 12
Section 4 ROMware Software 13
Section 4.1 Login 13
Section 4.2 Main Screen Overview 13
Section 4.3 BioDigitalPC® Power Control &
Monitoring
14-16
Section 4.4 MDC-SR10-V2 System Settings 17
4
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Notes, Important Information & Warnings
This manual details installation of the mobile data center, the components inside of the mobile data center, and
notable features of the MDC-SR10-V2 mobile server solution.
Installations will be supported by ADDC. Unless otherwise specied, all instructions provided in this manual will
assume that a user is a trained technician.
How to Read this Document
You will see this icon throughout the manual intended to point out warnings, important information, and
briey explain any new terminology.
5
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Equipment (Not Included)
• Laptop or Testing Network
Equipment (Included)
• MDC-SR10-V2 Case
• BioDigitalPC®Server Cards [Check
Invoice for Quantity]
• (1) DC Input Cable
• (1) AC Power Cord
Section 1.1 - What's in the Box?
MDC-SR10-V2 Case
AC Power Cord
a 5-pin Mil-5015 type Circular Connector DC Input Cable
Section 1.0 - Receiving Your MDC-SR10-V2
6
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Temperature Considerations
Your MDC-SR10-V2 is designed to operate at room temperature with its self-contained cooling.
Power Considerations
When properly congured and installed the MDC-SR10-V2 can draw up to 200 Watts depending on the
number, load, and version of the BioDigitalPC®s used.
To prevent improper cooling of equipment, do not block the fans.
Section 2.1 - Preparing For Your MDC-SR10-V2
Section 2 - MDC-SR10-V2 Preparation
7
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Section 2.2 - Installing Your BioDigitalPC®s
BioDigitalPC®s are hot-pluggable, meaning technicians do not need to remove power to begin adding or
removing them.
Section 2.2.1 - Opening the MDC-SR10-V2 Case:
Section 2.2.3 - Installing a BioDigitalPC®
Section 2.2.4 - Secure BioDigitalPC® With the Card Holder
Section 2.2.2 - Connect AC Power Cord
Only trained technicians are authorized to work beneath the MDC-SR10-V2 System Cover and
access any of the components inside the system.
Fully inserted card
Insert card into slot
Pull holder up and
rotate it 90°
Lift Clip
Lift Clip
AC Power Input
8
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Section 2.3 - Connect Monitor and Power On Your MDC-SR10-V2
Power On Button
Mini-DP video cable
needs to be connected
to the monitor.
9
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Section 2.3 - Connect Monitor and Power On Your MDC-SR10-V2
Power On Button
Network
connections.
Mini-DP video cable
13.3"
touchscreen
display
Card Slot
Number.
USB cable
to enable the
touchcreen.
Display power cable
SR-10
Module
screws to open
storage door. The
storage compartment
is used to store the
power cords.
Section 3 - MDC-SR10-V2 Overview
10
WWW.ADDC.COM | 516.673.4444 | INFO@ADDC.NET | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
As shown in Section 3, the MDC-SR10-V2 consists of a single SR-10 Module. The
SR-10 Module contains 10 BioDigitalPC®slots, each having three 1Gbps NICs
attached to an integrated switch. Each switch has two SFP+ 10Gbps connectors
and one 1Gbps RJ-45 connector broken out to the side panel of the MDC-SR10-V2
(See Section 3.2 for additional information). Each SR-10's integrated switch and
BioDigitalPC® power control are managed via the MDC-SR10-V2's Web-based
management program called: ROMWare (See Section 4 for additional information).
Section 3.1 - SR-10 Module
Altri manuali ADDC Magazzinaggio
