Addonics Technologies HDUS11SNDX Manuale utente

Technical Support

If you need any assistance to get your unit functioning properly, please have

your product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

T E C H N O L O G I E S

www.addonics.com

1:11 HDD Duplicator

(HDUS11SNDX)

User Guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Table Of Contents

Basic Instructions . . . . . . . . . . . . . Page 3

Functions . . . . . . . . . . . . . Page 4

Copy HDD . . . . . . . . . . . . . Page 5

Compare HDD . . . . . . . . . . . . . Page 5

PreScan Source . . . . . . . . . . . . . Page 6

ReScan Bus . . . . . . . . . . . . . Page 7

Source Size . . . . . . . . . . . . . Page 7

Overwrite . . . . . . . . . . . . . Page 8

Setup . . . . . . . . . . . . . Page 9

Advanced Setup . . . . . . . . . . . . . Page 12

Basic Troubleshooting . . . . . . . . . . . . . Page 15

Error Messages List . . . . . . . . . . . . . Page 16

Firmware Update Procedure . . . . . . . . . . . . . Page 17

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

I. Installing Drive into the HDD Duplicator

For installing a hard drive on the various enclosures that come with the HDD duplicator, refer to

thebundled enclosure installation guides.

Step 1

Once the hard drive is installed on the drive enclosure, slide in the Source drive into the drive bay. Push

down the handle and using the key provided, turn the key lock to the Lock position. This will secure the

drive and turn on the power to the hard drive.

Step 2

Slide in the Target drive into the drive bay. Push down the handle and using the key provided, turn the key

lock to the Lock position. This will secure the drive and turn on the power to the hard drive.

II. Connecting the Power Cable and Powering On

a. Connect the power cord provided from the wall outlet to theback of the tower.

b. A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary

switch is located on the front of the tower.

c. Push the auxiliary switch button to turn on the HDD duplicator.

III. The Duplicator Panel

There are four buttons and an LCD on the panel of HDD Duplicator.

1 –LCD shows a function or a message.

2 – it is used to scroll up function menus.

3 – it is used to scroll down function menus.

4 – it is used to execute a function.

5 – it is used to cancel a function.

IV. Duplicating a drive

When the duplicator powers on, it initializes and goes through the steps below

Shows the firmware version Initialize SDRAM's status..

Detect Drives' status. Shows the first function:

Copy HDD copies data directly from the source hard disk to the targethard disk.

Press ENT button to begin copy. The system will auto-detect the hard disks and show the following info

on the LCD.

The LCD will show the following info during the copying process: remaining time, completed percentage.

The copy speed, capacity and time will vary depending on the source hard disk. Once the copying

process is completethe LCD will display the following results.

HD Duplicator

1-1 Ver: Initialize SDRAM

Detect Drives

Copy-36MBs 0%

235.7GB 1:48

Copy HD

OK:

1.Copy HD

ENT

ESC

Duplicator Panel

Basic Instructions

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Functions

The copy controller has11 functions in total, with the 11th (Adv Setup) being a hidden system

function that only appears when the ESCkey ispressed for 2 secondsuntil there is a beep. These

are shown below.

10-01. Language

10-02. Copy Size

10-03. Startup Menu

10-04.Auto Compare

10-05. Button Sound

10-06. Device Info

10-07. System Info

10-08. Fast Copy

10. Setup

10-09.Auto Start Drive

10-10.Auto Start Timer

10-11. Tolerance Size

Duplicator Controller

1. Copy HDD

2.Async Copy HDD

3. Compare HDD

4.Async Compare

5. PreScan Source

6. ReScan BUS

7. Source Size

11.Adv Setup

11-01. Read Error Skip

11-02. Update Firmware

11-03. Compare Firmware

11-04. Quick Erase HDD

11-05. Full Erase HDD

11-06. H/W Diagnostic

11-07. Load Default

8. Secure Erase

9. Overwrite

10-12. BootTime Delay

10-13. Quick Compare

11-08. Copy HPA

11-09. Burn In

10. Setup

11.Adv Setup

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Copy HDD

Copy HDDcopies data directly fromthe sourcehard diskto

the target hard disk. Please make

surethat the capacity of the target hard disk is equal o

r larger than the sourcehard disk.

Choose option 1 fromthe menu:

Press ENT to begin copy. The system will auto-detect the hard di

sksand show the following

copying info on the LCD.

The LCD will show the following info during the copyin

g process: elapsed time, completed

percentage. The copy speed, capacityand time will vary

depending on the source hard disk. Once

the copying process is complete the LCD will display t

he following results.

Copy-36MB/s 0%

232.9GB 00:00:00

CopyHDD

OK: 11 Fail: 0

1. Copy HDD

HDD:11 232.9GB

Async Copy HDD

This option is used to specify the size of the source for simplifying further copying operations.

Choose option 2 from the menu:

2. Async Copy HDD

HDD:10 232.9GB

Press ENT . Before the start of the reproduction, if theconsoledetects that a hard drive

capacity is less than source, then the LCDwill show the cor

responding channel number.

Space NotEnough

And then automatically copies. The LCD will display t

he following info.

Acpy-36MB/s 0%

232.9GB 00:00:00

If the replication process to continue to add additi

onal hard diskdevice, LCD will only show the last

completed percentage.

Once the copying process is complete the LCDwill disp

lay the following results.

Async Copy HDD

OK: 11 Fail: 0

Compare

Compare HDD is used to see ifthe data on a source ha

rd disk is identical to the target hard disk

after the Copy HDoperation.

Choose option 3 from the menu:

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

3. Compare HDD

HDD: 11 232.9GB

Press ENT to begin the comparison. The LCDwill displaythe following info.

Comp-23MB/s 0%

232.9GB 00:00:00

Once the comparison is completethe LCD will display the following info as well asthe amount of

data on the sourcehard disk.

Compare OK:11

Fail: 0 Di

PreScan Source

PreScan HDD is used to check if the source hard disk can be accessed properly.

It alsotests the read speed.

Choose option 5 fromthe menu:

5. PreScan Source

HDD: 11 232.9GB

Async Compare

Compare HDD is used to seeifthe data ona sourcehard disk is identical to the

target hard disk after the Copy HDD operation. While compare process is

on-going, allows you to plug-in additional target drives and comparison will

automatically start for the added target drive.

Choose option 4 from the menu:

4. Async Compare

HDD: 11 232.9GB

Press ENT

to begin the async comparison. The LCDwill display the following info.

ACmp-23MB/s 0%

232.9GB 00:00:00

Compare OK:11

Fail: 0 Di

If the comparison process continues to add additionalhard diskdevice, LCD will only show the

last completed percentage.

Once the copying process is complete the LCDwill display the following results.

Press ENT

to begin scan. The LCDwill displaythe following info

Scan-90MB/s 1%

230.6GB00:00:27

Once the scan is complete, the LCDwill displaythe corresponding results

PreScan OK!

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

6. ReScan BUS

ReScan Bus

Chooseoption 6 from the menu:

Press ENT to re-scan hardware. The LCD will display the following info.

Re-Scan BUS NOW?

Yes

When the scan is complete the LCDwill display the fol lowing info.

Bus re- scan OK!

7. Source Size

Source Size

Source Size is used to show the capacity of the source.

Choose option 7 fromthe menu:

Press ENT and the LCDwill show the following info.

HDD:Hitachi

Size:232.9GB

Then press ENT and the LCDwill showthedata's size info.

HDD:Hitachi

Data:200.9GB

8. Secure Erase

Secure Erase

Secure Erase is used to wipe the data ofthe hard disk, i t will erase all of HDDof duplicator

(included SourceHDD).

Choose option 8 fromthe menu:

Press ENT to accessoption. By default it is setto No. Usethe Up and Down arrow keysto choose

Yes.

Wipe all data.

Continue?No

Press ENT and the LCDwill show the following info.

ReScan Bus allows swapping the source or target in and out without having to

reboot the system.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

10. Setup

Setup

Setup allows various system settings to be changed.There are 12 sub-options:

Language, Copy Size, Startup Menu, Auto Compare, ButtonSound, Device Info,

System Info, Fast Copy, Auto Start Drive, Auto Start Timer, Tolerance Size and

Boot Time Delay.

Choose option 8 fromthe menu:

In Process

Elapsed 01:00

9. Overwrite

Overwrite

Overwrite is used to overwritethe data of thehard disk, it will erase all HDDs connected to theduplicator

(including SourceHDD). There are 3 sub-options: One pass, 3 passand 7 pass.

Choose option 9 fromthe menu:

Press ENT to access option. Bydefault it is One pass Use the Up and Down arrow keys to choose

other options.

9-01. Overwrite

One pass

Press ENT to access option. Bydefault it is set to No. Use the Up and Down arrow keys to choose

Yes.

Wipe all data.

Continue?No

Press ENT and the LCD will show the following info.

In Process

Elapsed 01:00

Language

This option is used to selectthe system's language support. Bydefault this is set to English. Press

ENT to change the Language settings.

Language

English

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

10-02. Setup

CopySize

Press ENT and the LCD will display a detailed list of options as shown below

Use the Upand Down arrow keysto cho ent copy si zes. The system will heir

corresponding percentages sothe user can specify the amount to copy from the source hard disk.

Press ENT to con and savethe changes.

Copy Size

100%~1% (*MB)

Startup Menu

This option allows you to set an option other than "Se tup" to be displayed ilable

option on the menu every time you start the system.

Startup Menu

1. Copy HDD

Press ENT then usethe Up and Down arrow keysto choose other options. Bydefault t

menu option is CopyHDD.

10-03. Setup

Startup Menu

Auto Compare

This option automatically compares the source hard disk with the target hard disk after a copy

operation is completed.

Press ENT to accessop and Down arrow keys to choose

On.

Auto Compare

10-04. Setup

Auto Compare

Copy Size

This option is used to specify the size of the sourcehard disk for simplifying further copying

operations.

Button Sound

This option is usedto control the sound of abutton when you press it.

10-05. Setup

Button Sound

Press ENT and the LCDwill displaythe following info. Usethe Upand Down arrow keys to choose

whether button sound ison

Butt on Sound

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Device Info

This option is used to display the details of all hard disks connected to the copy controller.

10-06. Setup

Device Info

Press ENT and the LCDwill display each hard disk' information in order as shown below.

0 SourceCH: 0

Hitachi 232.9GB

System Info

This option displays system information.

10-07. Setup

System Info

Fast Copy

This option displays Fast Copy. Fast Copyonly copies data on the source drive

to the target drives. Currentlyonly supports FAT, FAT32, NTFS, HFS, Ext2 and

Ext3 partitions.

10-08. Setup

Fast Copy

Press ENT and the LCDwill displaythe following info. Use the Upand Down arrow keysto choose

whe unction currently on , FAT32, NTFS,HFS,

Ext2 and Ext3 partitions.)

Fast Copy

Auto Start Drive

This option is used to display to copy automatically once you insertHDD on target port.

10-09. Setup

Auto Start Drive

Press ENT to enter the foll defau he Up and Down arrow keysto

choose 1-11.

Auto Start Drive

Auto Start Timer

This option is used to set the period of time when the duplicator starts copying

automatically once you insert HDD on target port. Defaultis set at OFF, use the

arrows to choose time. 10-10. Setup

Auto Start Timer

Indice

Altri manuali Addonics Technologies Duplicatore di dischi

Addonics Technologies

Addonics Technologies CFASTD5 Manuale utente

Addonics Technologies

Addonics Technologies HDUSI325-A Manuale utente

Addonics Technologies

Addonics Technologies HDUSI325 Manuale utente

Addonics Technologies

Addonics Technologies AEDVDCOPPM4U Manuale utente

Addonics Technologies

Addonics Technologies ST5BDVES Manuale utente

Addonics Technologies

Addonics Technologies HDUS11325DX Manuale utente

Addonics Technologies

Addonics Technologies HDUSI325AES Manuale utente

Addonics Technologies

Addonics Technologies DGBRC7 Manuale utente

Addonics Technologies

Addonics Technologies DGBR4DR11 Manuale utente

Addonics Technologies

Addonics Technologies UDFH15-C Manuale utente

Addonics Technologies

Addonics Technologies HDUSAS Manuale utente

Addonics Technologies

Addonics Technologies HDU11SITDR Manuale utente

Addonics Technologies

Addonics Technologies Jasper II 1S JD2-325SN Manuale utente

Addonics Technologies

Addonics Technologies UDFH7 Manuale utente

Addonics Technologies

Addonics Technologies DGC3 Manuale utente

Addonics Technologies

Addonics Technologies HD4SNH Manuale utente

Addonics Technologies

Addonics Technologies HDUS11NB Manuale utente

Addonics Technologies

Addonics Technologies HDUS4SNDX-A Manuale utente

Addonics Technologies

Addonics Technologies HD9SITDRHS Manuale utente

Addonics Technologies

Addonics Technologies UDFHNVM15 Manuale utente

Addonics Technologies

Addonics Technologies HDU11SAS Manuale utente

Addonics Technologies

Addonics Technologies DGBRC3 Manuale utente

Addonics Technologies

Addonics Technologies HDUS325DX Manuale utente

Addonics Technologies

Addonics Technologies UDFHNVM7 Manuale utente

Manuali Duplicatore di dischi popolari di altre marche

Riso

Riso CV Series Manuale

MicroBoards Technology

MicroBoards Technology GX-2 Manuale utente

Carry

Carry Pro118 Manuale utente

CopyPro

CopyPro PowerPro II Manuale utente

Primera

Primera Max Manuale utente

Logicube

Logicube EchoPlus-NG Manuale utente

Silca

Silca Delta 2000 SA Manuale utente

Reflex7

Reflex7 Daisy Chain Series Manuale utente

Vinpower Digital

Vinpower Digital SharkCopier DC Manuale utente

Codonics

Codonics Virtua E Manuale utente

Octave

Octave Copy Master II Manuale utente

Kanguru

Kanguru U2-DVDDUPE-S Manuale utente

StarTech.com

StarTech.com 8STSATDUP11 Manuale utente

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manuale utente

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manuale utente

MicroBoards Technology

MicroBoards Technology Quic Disc QD-2 Manuale utente

Telex

Telex SpinWise Manuale utente

Aleratec

Aleratec 260206 Manuale utente