Addonics Technologies RCHDSAES Manuale utente

Addonics

T E C H N O L O G I E S

Ruby Combo Hard Drive

RCHDSAES & RCHDSAEU

User’s Guide

Version 1.0

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a class B digital

device pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy. If not installed and

used in accordance with the instructions, it may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user

is encouraged to try and correct the interference by one or more of the following

suggestions.

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver

Connect the equipment to a different power outlet other than the one where receiver is

connected

Consult a certified television or radio technician

Enclosure Overview

Step 1 Separate the top from the bottom cover of the drive enclosure by

loosening the screw as shown on the photo.

Step 2 Align the SATA connector in the 2.5” hard drive with the SATA connector

on the PCB.

Step 3 Wrap the shock absorbers around the hard drive and PCB.

shock

absorbers

PCB

top cover

2.5” SATA

hard drive

bottom cover

switch

Step 4 Turn over the PCB and secure the hard drive to the PCB with the

mounting screws that come with the kit.

Step 5 Mount the board to the bottom cover.

Step 6 Put the top cover on by holding it in near vertical position and sliding the

two metal clips inside the two small slots on the rear of the bottom cover.

Step 7 Lower the front of the top cover and making sure the two covers lined up

properly. Tighten the small retaining screw on the front of the bottom cover to

close the enclosure.

Ruby Enclosure

Switch:

INT: This mode is used when the enclosure is placed inside a drive

cradle. For mobile rack kits, this is the mode used.

EXT: This mode is used if the enclosure is used as an external hard

drive.

Ruby Drive Cradle

Note: You can only use one power connector at a time. Either use the 4-pin

Molex or 15-pin SATA connector but not simultaneously use them.

Mounting holes for

3 ½” drive bay

15-pin SATA

power connector

4-pin Molex

power connector

Power LED and

Drive Access LED

Switch

7-pin SATA

data connector

Model: RCHDSAES

*Note: The Ruby combo hard drive with the eSATA interface must be connected

to a SATA controller with hot swap capability in order to add and remove drive

cartridge without rebooting. Please consult your motherboard or the add-in card

manufacturer to determine hot swap support on your SATA controller. All of the

Addonics SATA Host Controllers are hot swap capable.

For External Application:

Step 1: Connect the eSATA cable to the eSATA port at the back of the

enclosure. The other end of the cable connects to an eSATA host controller.

Step 2: Plug into the power jack located at the back of the enclosure, the power

adapter. This power connection provides power to the ruby enclosure.

Step 3: Set the switch to EXT position. The power LED will light up to indicate

power is provided to the drive.

Model: RCHDSAEU

For External Application:

Step 1: Connect the eSATA cable to the eSATA port at the back of the

enclosure. The other end of the cable connects to the eSATA port on the USB2.0

to eSATA adapter. Plug the adapter to a USB port on your system.

Step 2: Plug into the power jack located at the back of the enclosure, the power

adapter. This power connection provides power to the ruby enclosure.

Step 3: Set the switch to EXT position. The power LED will light up to indicate

power is provided to the drive.

Power adapter

eSATA cable

USB Port

Green LED showing

adapter connectivity

Red LED showing

adapter access

eSATA cable from

Ruby enclosure

For Internal Application: (Applies to both models)

Step 1: Connect a SATA cable to the 7-pin SATA data connector to the SATA

interface of the cradle.

Step 2: Connect a 15-pin SATA power cable from your system’s power supply to

the SATA interface of the cradle. This power connection provides power to the

ruby drive cartridge system.

Step 3: Slide the Ruby enclosure inside the cradle. To turn ON the drive

enclosure, place switch on INT position.

Technical Support

If you need assistance to get your unit functioning properly, please call Addonics

Technical Support. Our technical staff will be happy to assist you, but they will

need your help to do so. Calling the technical support staff without all the proper

information can be both time consuming and frustrating. Here are some tips to

help you out:

MODEL NUMBER –Please have this number on hand.

SYSTEM INFORMATION –Type of computer, peripherals, etc.

OPERATING SYSTEM –What version of Windows

WHAT’S THE TROUBLE? – Give enough information

about your problem so that we can recreate and diagnose it.

FREE Software Drivers for all Addonics Technologies

Products are available 24 hours per day at the

World Wide Web Site: www.addonics.com.

Contact Information

Phone: 408-433-3899

Fax: 408-433-3898

Email: http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

TECHNICAL SUPPORT

Phone: 408-433-3855

Hours: 8:30 am - 6:00 pm PST

Email: http://www.addonics.com/support/query/

Drive

enclosure

eSATA cable

Drive

cradle

Questo manuale è adatto per i seguenti modelli

Altri manuali Addonics Technologies Magazzinaggio

Addonics Technologies

Addonics Technologies NAS NAST4SR5HPM-B Manuale utente

Addonics Technologies

Addonics Technologies DGC3 Manuale utente

Addonics Technologies

Addonics Technologies Sapphire Combo SBDRHEU Manuale utente

Addonics Technologies

Addonics Technologies JCCHDIF128 Manuale utente

Addonics Technologies

Addonics Technologies DCHDIES Manuale utente

Addonics Technologies

Addonics Technologies Sapphire Mobile Rack II Manuale utente

Addonics Technologies

Addonics Technologies AE25SNSP Manuale utente

Addonics Technologies

Addonics Technologies PPROEPU3 Manuale utente

Addonics Technologies

Addonics Technologies REDESP? REDESPU3 Manuale utente

Addonics Technologies

Addonics Technologies AERD25SN35 Manuale utente

Addonics Technologies

Addonics Technologies RAID TOWER IX RT93DAHX Manuale utente

Addonics Technologies

Addonics Technologies AESNAPMRI Manuale utente

Addonics Technologies

Addonics Technologies RCHD256ES Manuale utente

Addonics Technologies

Addonics Technologies CRC4HESU Manuale utente

Addonics Technologies

Addonics Technologies ST4IDEU2 Manuale utente

Addonics Technologies

Addonics Technologies AD25MSD Manuale utente

Addonics Technologies

Addonics Technologies AD25CFD Manuale utente

Addonics Technologies

Addonics Technologies External CipherChain Manuale utente

Addonics Technologies

Addonics Technologies CRT535PES Manuale utente

Addonics Technologies

Addonics Technologies RT3DAHEU3 Manuale utente

Addonics Technologies

Addonics Technologies NAS25HDU2 Manuale utente

Addonics Technologies

Addonics Technologies Sapphire Cipher II Snap-In SSN6G-256EU Manuale utente

Addonics Technologies

Addonics Technologies AD25CFASTD Manuale utente

Addonics Technologies

Addonics Technologies RT54S2HMEU Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente