ADEMCO 4110DL Manuale utente

User's Manual

4110DL/4110XM

N5100V5 9/96

–2–

TABLE OF CONTENTS

SYSTEM OVERVIEW.......................................................................................................................................4

Keypads...................................................................................................................................................4

Zones.......................................................................................................................................................4

Alarms......................................................................................................................................................5

Fire Protection............................................................................................................................................5

Burglary Protection .....................................................................................................................................5

Memory of Alarm.........................................................................................................................................5

Pager Notification .......................................................................................................................................5

ABOUT THE KEYPADS ....................................................................................................................................6

Keypad Types ...........................................................................................................................................6

Keypad Styles ...........................................................................................................................................6

SUMMARY OF SYSTEM STATUS DISPLAYS ........................................................................................................7

SUMMARY OF KEYPAD FUNCTIONS ..................................................................................................................8

SECURITY CODES.........................................................................................................................................10

Duress Code.............................................................................................................................................10

Quick Arming ............................................................................................................................................10

Assigning/Changing/Deleting User Codes (Using the 8 CODE Key) ....................................................................11

ENTRY/EXIT DELAYS.....................................................................................................................................12

CHECKING FOR OPEN ZONES (Using the ✴READY Key) ...................................................................................13

BYPASSING PROTECTION ZONES...................................................................................................................14

Using The 6 BYPASS Key..........................................................................................................................14

Quick Bypass...........................................................................................................................................15

ARMING PERIMETER ONLY, WITH ENTRY DELAY ON (Using The 3 STAY Key) .......................................................16

ARMING PERIMETER ONLY, WITH ENTRY DELAY OFF (Using The 7 INSTANT Key ) ................................................17

ARMING ALL PROTECTION, WITH ENTRY DELAY ON (Using The 2 AWAY Key).......................................................18

ARMING ALL PROTECTION, WITH ENTRY DELAY OFF (Using The 4 MAXIMUM Key) ................................................19

DISARMING THE SYSTEM AND SILENCING ALARMS (Using the 1 OFF Key)...........................................................20

–3–

(continued) TABLE OF CONTENTS

USING THE KEYSWITCH.................................................................................................................................21

CHIME MODE (Using the 9 CHIME Key) ............................................................................................................22

PANIC KEYS.................................................................................................................................................22

TESTING THE SYSTEM (Using the 5 TEST Key) .................................................................................................24

TROUBLE CONDITIONS..................................................................................................................................26

"Check" and "Battery" Displays.....................................................................................................................26

Power Failure ............................................................................................................................................27

Other Displays ..........................................................................................................................................28

FIRE ALARM SYSTEM, IF INSTALLED................................................................................................................29

In Case of Fire Alarm...................................................................................................................................29

Silencing Fire Alarms ..................................................................................................................................30

NATIONAL FIRE PROTECTION ASSOCIATION RECOMMENDATIONS ON SMOKE DETECTORS...................................31

EMERGENCY EVACUATION ............................................................................................................................32

QUICK GUIDE TO ALARM SYSTEM FUNCTIONS..................................................................................................33

SUMMARY OF AUDIBLE/VISUAL NOTIFICATION ................................................................................................34

PROTECTION ZONES LIST..............................................................................................................................35

OWNER'S INSURANCE PREMIUM CREDIT REQUEST...........................................................................................37

CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC) STATEMENT....................................................................39

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS .........................................................................40

IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMS .................................................................................41

THE LIMITATIONS OF THIS ALARM SYSTEM ......................................................................................................42

SERVICING INFORMATION .............................................................................................................................43

WARRANTY .....................................................................................................................................Back Cover

This manual is a step-by-step guide that will aquaint you with the system's features and benefits. It defines the

components and their functions, describes their operation, and instructs you with normal and emergency procedures.

Keep this manual in a convenient place so that you can refer to it as necessary.

–4–

SYSTEM OVERVIEW

General Congratulations on your ownership of an Ademco Security System.

You've made a wise decision in choosing it, for it represents the latest in

security protection technology today, including microcomputer technology to

monitor all system status. Ademco is the world's largest manufacturer of

security systems and millions of premises are protected by Ademco

systems.

Basically, this system offers you three forms of protection: burglary, fire

and emergency. Your system may consist of at least one keypad which

provides full control of system operation, various sensors such as motion

detectors and door and window sensing devices, plus a selected number

of strategically placed smoke or combustion detectors designed to provide

early warning in case of fire. Your system may also have been pro-

grammed to automatically transmit alarm or status messages over the

phone lines to a central alarm monitoring station.

Keypads All system functions are controlled by your keypad(s). The keypads

feature a telephone style (digital) keypad and a Liquid Crystal Display

(LCD) which shows the nature and location of all occurrences. Their built-in

sounder will sound during alarm and trouble conditions.

For additional information, see the following section:

ABOUT THE

KEYPADS.

Zones Your system's sensing devices have been assigned to various zones. For

example, the sensing device on your Entry/Exit door may have been

assigned to zone 01, sensing devices on windows in the master bedroom

to zone 02, and so on. These zone numbers will appear on the display

when an alarm or trouble condition occurs.

–5–

(continued) SYSTEM OVERVIEW

Alarms When an alarm occurs, both the keypad and external sounders will sound,

and a message at the keypad will identify the zone(s) causing the alarm. In

addition, if your system is connected to a central monitoring station, an

alarm message will be sent. To stop the alarm sounding, you simply disarm

the system.

Fire Protection The fire protection portion of your security system (if used) is always on

and will sound an alarm if a fire condition is detected. Refer to the

FIRE

ALARM SYSTEM

section for important information concerning fire pro-

tection, smoke detectors and planning emergency exit routes from your

premises.

Burglary Protection The burglary protection portion of your system must be turned on or

"armed" before it will sense burglary alarm conditions and sound an alarm.

Your system can be armed in one of four modes: STAY, AWAY, INSTANT

and MAXIMUM. Refer to the

ARMING THE SYSTEM

sections for

instructions in using these modes of operation.

Your system also provides a CHIME mode for alerting you to the opening

and closing of doors and windows while the system is disarmed.

Memory Of Alarm When an alarm or trouble condition occurs, the keypad displays the

number(s) of the zone(s) that caused the problem, and displays the type

of alarm or trouble (ex. FIRE, ALARM, CHECK). The display remains until it

is cleared by entering the OFF sequence (security code + OFF key) twice.

Pager Notification If you have chosen to be notified of alarms or other system conditions by

pager, the following codes will be sent to your pager by the control:

1811=Trouble 1911=Alarm

1001=Open 1002=Close

–6–

ABOUT THE KEYPADS

Keypad Types All commands and procedures described herein are illustrated for Fixed-

Word Display Keypads. However, an Alpha Display Keypad (with a 2-

line LCD display for more detailed protection point identification and system

status, but with similar commands and procedures) is available and might

have been used instead.

Keypad Styles

Unless noted oth-

erwise, all proce-

dures in this man-

ual apply equally to

all keypad types

and styles.

Fixed-Word keypads are available in two styles, A and B, either of which

may have been used in your system. Although different in appearance,

both styles are functionally similar. The keypads on style B keypads are

located behind a flip-down door which can be removed, if desired. Words

displayed on all Fixed-Word keypads are the same, except that their

location in the display window differs slightly with each style.

Note:

Some Style B keypads are equipped with a READY indicator in

place of the POWER indicator on Style A keypads. The READY indicator

is lit when the system is ready for arming (no protection zones open).

While the system is disarmed, this indicator will go on and off as protection

zones are opened and closed.

STYLE A FIXED-WORD KEYPADS STYLE B FIXED-WORD KEYPADS

ALARM

CHECK

FIRE

AWAY

STAY

INSTANT

BYPASS

NOT READY

NO AC

CHIME

BAT

PANIC

123

456

789

OFF AWAY STAY

MAX TEST BYPASS

INSTANT CODE CHIME

READY

ARMED

POWER

1 2 3

4 5 6

7 8 9

OFF AWAY STAY

MAX TEST BYPASS

INSTANT CODE CHIME

READY

PANIC

ARMED

READY

ALARM

CHECK

FIRE

AWAY

STAY

INSTANT

BYPASS

NOT READY

NO AC

CHIME

BAT

DIAGRAM

SHOWN WITH DOOR REMOVED

–7–

SUMMARY OF SYSTEM STATUS DISPLAYS

AWAY All burglary zones, interior & perimeter,

are armed.

STAY Perimeter burglary zones, such as windows

and doors are armed.

INSTANT Perimeter burglary zones armed and

entry delay is turned off.

BYPASS One or more burglary protection zones

have been bypassed.

NOT READY Appears when burglary portion of the system

is not ready for arming (due to one or more

open protection zones).

READY The burglary portion of the system

is ready to be armed.

NO AC Appears when AC power has been cut off.

System is operating on backup battery power.

AC Appears when AC power is present.

CHIME Appears when the CHIME feature is ON.

BAT Low system battery

(if no zone number is shown), or

Low battery condition in a wireless sensor

(if zone number is

also

shown).

ALARM

CHECK

FIRE

AWAY

STAY

INSTANT

BYPASS

NO AC

CHIME

BAT

NOT READY

STYLE A

ALARM

FIRE

AWAY

BYPASS

STAY

CHECK INSTANT

NO AC

NOT READY

CHIME BAT

00 STAY

FIRE

ALARM

AWAY

STYLE B

FIXED-WORD KEYPAD DISPLAYS

ALARM Appears when an intrusion has been detected and the system is armed (also appears

during a fire alarm). Accompanied by the ID # of the protection zone in alarm.

CHECK Appears when a malfunction is discovered in the system at any time or if a fault is

detected in a FIRE zone at any time or in a DAY(Trouble)/NIGHT(Alarm) burglary zone

during a disarmed period. Accompanied by a display of zone number in trouble.

FIRE Appears when a fire alarm is present. Accompanied by a display of the zone in alarm.

–8–

SUMMARY OF KEYPAD FUNCTIONS

1. DISPLAY WINDOW: Displays protection zone

ID and system status messages.

2. 1OFF KEY: Disarms burglary portion of the

system, silences alarms and audible trouble

indicators, and clears visual display after

problem's correction.

3. 2AWAY KEY: Arms the entire burglary sys-

tem, perimeter and interior.

4. 3STAY KEY: Arms perimeter portion of bur-

glary system only. Interior protection is not

armed, which allows movement within

premises without causing alarm.

5. 4MAXIMUM KEY: Arms in manner similar to

AWAY mode, but without the entry delay

feature, thus providing maximum protection.

An alarm will occur immediately upon opening

any protection point, including the entry/exit

door.

6. 5TEST KEY: Tests the system and alarm

sounder if disarmed. Refer to

TESTING THE

SYSTEM

section for test procedures.

7. 6BYPASS KEY: Removes individual pro-

tection zones from being monitored by the

system.

8. 7INSTANT KEY: Arms in manner similar to

STAY mode, but without the entry delay

feature. Entering via the entry/exit door will

cause an instant alarm.

9. 8CODE KEY: Used to assign additional user

codes for other users of the system.

10. 9CHIME KEY: Turns CHIME mode on and

off. When on, the opening of windows or

doors while the system is disarmed will sound

3 beeps at the keypad(s).

11. ✴READY KEY: Displays all open protection

zones.

12. #KEY: "Quick Arm" key permits ARMING of

the system without use of a security code (if

so programmed).

13. KEYS 0–9†:Used to enter your security code(s).

14. READY INDICATOR: (GREEN) Lit when the

system is ready to be armed (no faults present).

While the system is disarmed, this indicator will go

on and off as protection zones are closed and

opened.

Note:

On some keypads there is, instead, a

POWER INDICATOR (GREEN) which is

lit when AC power is present. If the

indicator is off, the system may still be

operating, but on its backup battery

power. See

Power Failure

TROUBLE

CONDITIONS

section.

†

Note: Keys 1 through 9 each perform their associated companion functions (OFF, AWAY, STAY,

etc.) when preceded by an entry of the security code (as described later).

–9–

15. ARMED INDICATOR: (RED) Lit when

the system has been armed (STAY,

AWAY, INSTANT or MAXIMUM).

16. INTERNAL SOUNDER: The built-in

keypad sounder mimics the alarm

sounder during alarms, and will also

"beep" during certain system functions.

(see

SUMMARY OF AUDIBLE/ VISUAL

NOTIFICATION

17. EMERGENCY KEYS:

Individual keys A, B, and C(key D not

used).

On some keypads, these keys are not

present, and the following key pairs may

be available, instead, for emergency

functions:

✴&#, ✴& 1 , # & 3

Some or all of these keys/pairs may be

programmed for panic functions by your

installer (see

PANIC KEYS

section).

IMPORTANT!: When entering codes and

commands, sequential key depressions must be

made within 2 seconds of one another. If 2 seconds

elapses without a key depression, the entry is

aborted and must be repeated from its beginning.

ARMED

READY

ALARM

FIRE

AWAY

BYPASS

STAY

CHECK INSTANT

NO AC

NOT READY

CHIME BAT

OFF AWAY STAY

MAX TEST BYPASS

INSTANT CODE CHIME

READY

123

456

PANIC

15315

811 913

STYLE B KEYPAD

–10–

SECURITY CODES

General At the time of installation, your installer programmed a personal four-digit

Master code, known only to you and yours. This code is used to perform

most system functions, including arming and disarming of the system. As an

additional safety feature, temporary user codes can be assigned (see next

page) for use by those not having a need to know the Master code. Note

that the Master code remains in effect even when other user codes are

assigned.

Duress Code

Ask your installer if

"Duress" is active for

your system, and if so,

check here:

This feature is intended for use when you are forced to disarm or arm the

system under threat. When used, the system will act normally, but can

silently notify the central station of your situation, if that service has been

provided.

The Duress code is defined as user number 8.

Important: The Duress code is useful only when connected to a central

station.

Quick Arming

Ask your installer if

"Quick Arming" is active

for your system, and if

so, check here:

If your system supports "Quick Arming", the "#" key can be pressed in

place of the security code when arming the system. The security code is

always

required, however, when disarming the system. accept

Altri manuali per 4110DL

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ADEMCO Sistema di sicurezza

ADEMCO

ADEMCO 5600 Alert II Manuale utente

ADEMCO

ADEMCO Q16 Istruzioni per l'installazione

ADEMCO

ADEMCO VISTA-25 Manuale utente

ADEMCO

ADEMCO VISTA-20PS Manuale utente

ADEMCO

ADEMCO Ademco VISTA-40 Manuale utente

ADEMCO

ADEMCO 1026 Manuale utente

ADEMCO

ADEMCO VISTA-100 Manuale utente

ADEMCO

ADEMCO LYNXR24 Manuale utente

ADEMCO

ADEMCO LYNXR-EN Manuale utente

ADEMCO

ADEMCO VISTA-20PS Istruzioni per il montaggio

ADEMCO

ADEMCO LYNX Manuale utente

ADEMCO

ADEMCO 4130XM Manuale utente

ADEMCO

ADEMCO VISTA 5140XM Manuale utente

ADEMCO

ADEMCO 4180 Manuale utente

ADEMCO

ADEMCO Vista-10SEa Manuale utente

ADEMCO

ADEMCO Vista 4140XMPT Manuale utente

ADEMCO

ADEMCO Via-30P Manuale utente

ADEMCO

ADEMCO 4160-12 C-COM Manuale utente

ADEMCO

ADEMCO VISTA-50P Manuale utente

ADEMCO

ADEMCO VISTA-250BP Istruzioni per il montaggio

ADEMCO

ADEMCO Vista-10P Istruzioni per il montaggio

ADEMCO

ADEMCO Vista AT Manuale utente

ADEMCO

ADEMCO VISTA-50P Manuale utente

ADEMCO

ADEMCO Alarm System Manuale di istruzioni

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente