Adesso EZScan 2000 Manuale utente
NuScan 2000 Series
USER'S GUIDE
Copyright © 2006. All rights reserved.
No warranty of any kind is made in regard to this material, including, but not
limited to, implied warranties of merchantability or fitness for any particular
purpose. We are not liable for any errors contained herein or for incidental or
consequential damages in connection with furnishing, performance or use of this
material. We shall be under no liability in respect of any defect arising from fair
wear and tear, willful damage, negligence, abnormal working conditions, failure to
follow the instructions and warnings, or misuse or alteration or repair of the
products without written approval. No part of this document may be reproduced,
transmitted, stored in a retrieval system, transcribed, or translated into any
human or computer or other language in any form or by any means electronic,
mechanical, magnetic, optical, chemical, biological, manual or otherwise, except
for brief passages which may be quoted for purposes of scholastic or literary
review, without express written consent and authorization. We reserve the right to
make changes in product design without reservation and without notification. The
material in this guide is for information only and is subject to change without
notice. All trademarks mentioned herein, registered or otherwise, are the
properties of their various, ill, assorted owners.
General handling precautions
•Do not dispose of the scanner in fire.
•Do not put the scanner directly in the sun or by any heat source.
•Do not use or store the scanner in a very humid place.
•Do not drop the scanner or allow it to collide violently with other objects.
•Do not take the scanner apart without authorization.
Introduction
The NuScan 2000 Long Range CCD barcode scanners come in three different
models to handle any task. Its flexible architecture gives users three different
configurations to choose from, with different combinations of scan engines and
communications. This means that the scanner gives the users an unsurpassed
combination of flexibility and power; match each user’s needs to a tee.
With their rugged design and ergonomic styling, the scanners offer superior
service life and reduce user fatigue. Scanning performance is the highlight of the
unit, featuring a 3000 pixel CCD and wide services window for unbeatable first
read success rates, in addition to 300 scans per second performance.Ahandy
status LED and programmable beep give users both audio and visual cues about
scan status, further increase accuracy and efficiency.Also, its built-in hardware
decoding capability means the scanner is able to accurately recognize the
world’s more popular barcodes.
Boasting several compatible interfaces and numerous configurations, the
scanner is a powerful handheld scanner without compromise.
Unpacking
The NuScan 2000 Long Range CCD Barcode Scanner package should
contain:
1 ea. NuScan 2000 Long Range
CCD Barcode Scanner
1 ea. Communication Cable
1 ea. Power Adapter
(For Serial Units Only)
1 ea. User's Manual
If any package contents are damaged or missing, please contact:
Adesso Inc.
160 Commerce Way
Walnut, CA 91789
909-839-2929 TEL
909-839-2930 FAX
www.adesso.com
Please leave this Users' Manual within easy access of person using the
scanner.
Finding Your Way Around
When a barcode is successfully decoded, the LED indicator on the top of
the scanner unit flashes green and the buzzer sounds. If not, the LED will
show red and the buzzer is no sound.
Connecting the Cable
1. Align the tab, and plug the cable connector into the cable port in the bottom
of the handle.
2. Twist the bayonet lock to the right to secure.
Connecting to a Host
The Handheld Scanner supports USB, Keyboard Wedge and RS232
communications. Select a Communications Cable appropriate to your
host.
1. Insert the plug on the free end of the Communications Cable into the
appropriate connector on the host.
2. Insert the small plug terminating the PowerAdapter wire into the socket on
the side of the Communications Cable.**
3. Plug the Power Adapter into an outlet. **
** Step 2 & 3 only for RS232 interface
USB Connection
Keyboard Emulation connector
RS-232 Connection with D type 9 Pin Connection
Test Scanning
1. Ensure all connections are secure.
2. Aim the scanner at a barcode within range.Assuming the scanner is in
trigger mode (default), press the trigger.
3. On successful decode, the scanner beeps and the LED flashes green.
Tip
1. Do not hold the scanner directly over a barcode. At 90˚, scanning light can bounce directly back
into the scanner from the barcode area as specular reflection, creating a "dead zone" where
decoding is, at best, difficult. Instead of a 90° head-on approach, tilt the scanner up to 65° forward
or backward to achieve a successful decode. Practice a few times to find what range of angles
works best.
Maintenance
Cleaning the scan window is the only maintenance required.Adirty window may
affect scanning accuracy.
Never use any abrasive material or solvents on the window. Do not spray water
or other cleaning liquids directly onto the window.
Remove dirt by wiping gently with a damp cloth or tissue moistened with water
and/or ammonia.
Trouble Shooting
Problem: Nothing happens when you follow the operating instructions.
Possible Cause Possible Solution
Interface cables are
loose. Check for loose cable connections.
Problem: Light comes on, but symbol does not decode.
Possible Cause Possible Solution
Scanner is not
programmed for the
correct bar-code type.
Be sure the scanner is programmed to
read the type of barcode you are
scanning.
Barcode symbol is
unreadable. Check the symbol to make sure it is not
de-faced. Try scanning test symbols of
the same barcode type.
Distance between
scanner and barcode is
incorrect.
Move the scanner closer to or further
from the barcode.
Problem: Symbol is decoded, but not transmitted to the host.
Possible Cause Possible Solution
Scanner is not
programmed for the
correct host type.
Scan the appropriate host type barcode.
Problem: Scanned data is incorrectly displayed on the host.
Possible Cause Possible Solution
Scanner is not programmed to
work with the host. Check
Handheld Barcode Scanner
Series host type parameters or
editing options.
Be sure proper host type is
selected.
For RS-232, ensure the scanner’s
communication parameters match
the host’s settings.
For keyboard emulation
configuration, ensure the system is
programmed for the correct
keyboard type, and that the CAPS
LOCK key is off.
Be sure editing options (e.g. UPC-
E to UPC-A Conversion) are
properly programmed.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Adesso Lettore di codici a barre
Adesso
Adesso NuScan 7300CR Manuale utente
Adesso
Adesso 5100 Manuale utente
Adesso
Adesso Nuscan 4300B Manuale utente
Adesso
Adesso NuScan 6000 Manuale utente
Adesso
Adesso NuScan 6000 Manuale utente
Adesso
Adesso NUSCAN 3200 series Manuale utente
Adesso
Adesso NuScan 5000 Manuale utente
Adesso
Adesso NuScan 2100 Series Manuale utente
Adesso
Adesso NuScan 2100 Series Istruzioni operative
Adesso
Adesso NuScan 4000 Manuale utente
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
