ADI AM580 Manuale utente

4x256 Memory Channels

CTCSS/DCS/2TONE/5TONE

DTMF-ANI/5TONE-ANI

Compander

Detachable Front Panel

AM580

USER'S MANUAL

FCC ID:RIQAM-580

Congratulations!

First of all, thank you for purchasing this mobile radio transceiver proudly made by ADIC. We

carefully built this device to be user-friendly, ruggedly durable, and high quality. The device is built with a cooling fan to

provide stability during high output transmission; it also has four channel modes of UV, VU, VV, and UU. AM-580 has 758

memory channels, full duplex mode, detachable front panel, and many other features waiting for you to explore!

Please take a few minutes to read this manual carefully. The information provided here will allow you to derive

maximum performance from the radio.

We’re glad you are part of the ADIC team now. Contact us anytime if you have any comments or enquiry, because

your satisfaction is our No.1 priority!

NOTE:

1. Please DO NOT operate the device while driving.

2. AVOID long period of continuously operation under high output as it may cause overheat to the device. Make sure the

surface of the device is not in contact with plastics or other flammable objects to avoid any possible dangers.

3. The device is designed for use with 13.8V DC; please DO NOT use 24V DC to avoid damage to the device.

4. Please DO NOT keep the device under a dusty or humid circumstance, and please do not place the device on an

uneven platform.

5. If interference occurs, please move the device away from the source of interference such as TV, power generators and

etc.

6. If smoke or odor came out from the device, please TURN OFF the power immediately. Please contact your dealer or

ADIC service team.

Disclaimer:

Changes or modiﬁcations to this transceiver, not expressly approved by ADIC Corp., could void your authority to operate

this transceiver under FCC regulations.

CONTENTS

Supplied Accessories .

.........................4

Supplied Accessories..............................................................4

Initial Installation .......................................................................4

Mobile installation ...................................................................4

DC Power Cable Connection ..................................................5

Antenna Connection ...............................................................6

Accessories Connections........................................................7

Getting Acquainted ...................................................................8

Front panel..............................................................................8

Rear panel ..............................................................................9

DISPLAY .................................................................................9

microphone ...........................................................................10

Basic Operations.....................................................................11

Switching The Power On/Off................................................. 11

Adjusting The Volume .......................................................... 11

Switch between VFO and Channel mode .............................11

Adjusting Frequency .............................................................11

Adjusting Channel.................................................................11

Switch Between Main Band and Sub band...........................12

Selecting the frequency band ...............................................12

Receiving ..............................................................................12

Squelch Off/Squelch Off Momentary.....................................12

Transmitting ..........................................................................12

Shortcut Operations................................................................13

........... 13

Squelch Level Setup .................................................

Transmit DTMF/2TONE/5TONE signaling ............................13

High/Mid/Low Power Switch .................................................13

Frequency Reverse...............................................................13

Band-width Selection ............................................................13

Home Channel ......................................................................13

Hyper Memory channel.........................................................13

Dual Watch............................................................................14

Emergency Alarm..................................................................14

Channel/Frequency Scan .....................................................14

Channel Scan Skip ...............................................................14

Channel Edit .........................................................................14

Scan range Limit ..................................................................14

Channel Copy .......................................................................14

Channel Delete .....................................................................15

General Setting........................................................................16

APO (Automatic Power off)...................................................16

Automatic offset ....................................................................16

Frequency Channel Step Setup............................................16

VFO Band lockout.................................................................17

Beep Function.......................................................................17

CPU Clock frequency Change ..............................................17

2TONE Encode select ..........................................................17

5TONE Encode select ..........................................................18

Add Optional signaling ..........................................................18

CTCSS encode Setup ..........................................................18

CTCSS decode Setup...........................................................19

Sub Band Display Setup .......................................................19

DTMF Encode Pre-Loading time ..........................................19

DTMF Encode Transmitting Time .........................................20

DTMF Encode setup .............................................................20

.........20

........................21

................21

..........22

.................23

......23

..........23

...........23

.........24

.......24

.............................24

......................25

......25

....25

......25

.........26

......26

...........26

.......27

..........................27

.27

.........27

....28

.............28

....................28

Squelch Mode Setup....................................................

Compander ...................................................

Scrambler Setup ...................................................

Tone Burst (Pilot Frequency) ................................................

Keypad Mode Setup ...................................................

Keypad Lockout ...................................................

TX OFF (PTT Lockout) ...................................................

Squelch Level setup....................................................

Frequency Reverse....................................................

Sub band mute setup...................................................

Editing Channel Name ...................................................

Channel Function Auto Storage Setup ....

Microphone PA,PB, PC,PD key setup ............

RF Squelch level setup ...................................................

OFFSET Direction setup...................................................

Scan Dwell Time Setup...................................................

Priority channel scan....................................................

Offset frequency Setup ...................................................

Display mode Setup...................................................

Busy Channel Lockout ...................................................

Radio's DTMF SELF ID ENQUIRY .............

5TONE SELF ID ENQUIRY.................................................

TOT (Time-out timer) ...................................................

VFO Frequency Linkage ...................................................

Wide/Narrow band ...................................................

Cross Band repeat ...................................................

LCD backlight....................................................

Keypad backlight brightness .................................................

Calling Record ......................................................................29

AM Function..........................................................................29

Automatic AM function ..........................................................29

VHF External speaker port....................................................30

BEEP Volume control ..........................................................30

Talk Around........................................................................... 30

Microphone speaker............................................................. 30

Password Function ...............................................................30

Microphone Operation ............................................................31

Send DTMF signaling ...........................................................31

Main/Sub band switching ......................................................31

Function operation through PA-PD keys...............................31

Cable Clone..............................................................................33

Resume Factory Default .......................................................33

Programming Software Installing and Starting ....................34

Install USB Cable Driver Programme ...................................34

Maintenance.............................................................................35

Default Value For Factory Resume......................................35

Trouble Shooting...................................................................35

Specications ..........................................................................36

Attached Chart.........................................................................37

51 groups CTCSS Tone Frequency(Hz) ...............................37

1024 groups DCS Code........................................................37

CONTENTS

Package Check / Mobile Installation

Thank you for choosing ADIC products. Please carefully

check the package to see if all the contents listed are

included; if anything is damaged or missing please contact

your dealer or ADIC service team. Thank you.

※Content List

Item

Quantity

AM-580 Mobile Radio

Handheld Microphone

Mounting Bracket

DC Power Cable

Backup Fuse

Screws

Manual

AM-580 Manual Mounting Bracket H. Microphone

DC Power Cable Backup Fuse Screws

Installation on Vehicle

※Caution

1. For safety, before installing power cable, make sure the

negative charge is removed.

2. After installation is complete, connect the negative charge

back and make sure all the setup is correct.

3. If the fuse breaks, check the power cable and replace the

fuse with the same spec.

4. After the completion of connection, use electrical tape to

wrap the fuse to prevent from heat and humidity.

5. Fuse should not be removed even with excessive length of

power cable.

Use the screw and the washer to assemble the machine to

the mounting bracket, make sure it’s tightened to prevent any

damage caused by loosening.

The design of the mounting bracket allows you to have three

different angles as you desired.

DC Power Cable Installation

※Power Operation

Only connect the device to a 12V DC power source, DO NOT

connect to a 24V power source. Make sure the battery has

enough charge. If the voltage of the battery is low, the

display of the device may be dimmed during transmitting and

the output power may drop instantly.

1. Use the shortest route from the device to the car battery.

- DO NOT use the cigarette-plug in the vehicle

- Layout of the cable should avoid heat, humid spot.

2. After the layout of the cable, use electrical tape to wrap up

the fuse box to avoid humidity, make sure the cables are

stably attached.

3. To avoid short current, remove the negative charge on the

battery then connect the radio.

4. Make sure the charges are correctly connected; red cable

connects to positive charge and black cable connects to

negative charge.

5. Reconnect the negative charge removed earlier from the

battery.

6. Connect the DC power cable to the radio, firmly press until

tightened.

Basic Installation

※Fixed Station Installation

For use of this transceiver as a fixed station, you will need a

13.8V DC power supply. Recommended power supply

current is 12A.

1. Connect the DC power cable to a stable power supply.

Make sure red is connected to positive charge and black is

connected to negative charge.

- DO NOT directly connect the radio to an AC outlet.

- DO NOT substitute a cable with smaller wire gauges.

2. Connect radio’s DC power cable to a power supply cable.

Press firmly to so that it’s tightened.

※Fuse Replacement

If the fuse breaks, check and find out the cause before replacing the

new fuse. If the fuse breaks again, please remove the power cable,

contact your dealer or ADIC service team for assistance.

Fuse Location

Fuse Current Rating

Transceiver

15A

DC Power Cable

20A

*Use only specified fuse current to avoid possible damage to the transceiver.

Antenna Installation

Install appropriate antenna

before operating. Carefully

install the antenna as it will

affect the range of the output.

Use a 50Ωimpedance

low-loss coaxial antenna.

AVOID using the transceiver when the vehicle battery is not fully charged or

when the engine is off, this will cause the vehicle battery to run out.

1. Transmitting without antenna may cause damage to the transceiver.

2. Equip lightning protection for stationed operation to reduce the risk of fire,

electric shock, and damage to the transceiver.

Basic Functions•

NO. KEY FUNCTION

1 Left Dial Knob

Rotate it to choose frequency /channel. Press

it to set the left band as "Main Band"; In VFO

mode, press it to choose the frequency band;

In function setup as conrm key; in scan mode,

rotate it to change scan direction

2 Right Dial Knob

Rotate it to choose frequency /channel. Press

it to set the right band as "Main Band"; In VFO

mode, press it to choose the frequency band;

In function setup as conrm key; in scan mode,

rotate it to change scan direction

3 Left Volume Knob Adjust left band volume level.

4 Right Volume Knob Adjust right band volume level.

【

TV/SQL

】

In standby. press this key to turn On/Off TV

function.Hold this key to cancel squelch

Getting Acquainted

FRont pAnel

6 Function set Key In standby , press this key to enter function menu

7 PWR Press it to power On /Off the transceiver

8 Left

【

LOW

】

Key

In standby press it to change H/L power for present

channel.Long press it to turn On/Off

Function

9 Left

【

V/M

】

Key

In standby, press it to switch between channel

mode and VFO mode. Long press it to set Wide/

Narrow band.

10 Left

【

】

Key

In standby, press it to switch between HOME

channel and normal channel. Long press it to

enter dual watch of VFO channel and current

channel.

11 Left

【

SCAN

】

Key

In standby, press it to start channel or frequency

scan.In channel mode, hold it to set current

channel scan skip.

12 Right

【

LOW

】

Key

In standby press it to change H/L power for

present channel.Long press it to turn On/Off

Frequency Reverse Function

13 Righ

【

V/M

】

Key

In standby, press it to switch between channel

mode and VFO mode. Long press it to set Wide/

Narrow band.

14 Righ

【

】

Key

In standby, press it to switch between HOME

channel and normal channel. Long press it to

enter dual watch of VFO channel and current

channel.

15 Righ

【

SCAN

】

Key

In standby, press it to start channel or frequency

scan.In channel mode, hold it to set current

channel scan skip.

16 LCD

For display of channel, frequency and function

setup.

Frequency

Reverse

VOLVOL

POW

LOWV

/MHM SCNLOW V/M HM SCN

TV/SQL

SET

NO. KEY FUNCTION

1 Ext. Power Jack

Terminal for connecting optional cable QCC01 for

use with ignition key On/Off function.The radio will

auto power on when car is driving. The radio will

auto power off when car stops.

2Ext.Speaker Terminal Terminal for optional external speaker SP02

3 TV/AV port Connect to television TV/AV port. （Optional)

4 Heat -sink fan Runs Automatically when radio temperature rise up.

5 Antenna Connector Connect a 50 Ω antenna

NO. INDICATOR FUNCTION

1Displays the channel number and Menu number.

2Appears when current channel is priority channel

3Appears when current channel is set Scan Skip

4Appears when current channel has CTCSS Encode

5Appears when current channel has CTCSS Decode

6Appears when the Offset function is ON

7Appears while transmitting.

8Displays the Main channel.

9Displays the operating frequency,channel name

10 Displays when receiving a signal or Monitor is ON

11 Signal strength for receiving and power level for

transmitting

12 Appears while in Narrow band.

13 Appears when mute has been turned ON.

14 Appears when the DCS function is ON.

15 Appears while in AM mode

16 Appears when the Scrambler function is ON

17 Appears when the Compander function is ON.

18 Appears while using Low output power

19 Appears while using Middle output power

20 Appears while Auto power off function is ON.

21 Appears when the Key Lock function is ON.

22 Appears when press SET key.

23 Appears when choose KEY2 mode.

24 Appears when corss band repeat function is ON

Getting Acquainted

ReAR pAnel

diSplAY

4 132

1 1

12 1213 1314 1415 1616

17 1718 1819 19

2 534 6 7 8

2 534 6 7

Indice

Altri manuali ADI Radio

ADI

ADI AT-600 Manuale utente

Manuali Radio popolari di altre marche

EisSound

EisSound KBSound iSelect Manuale utente

Midland

Midland 1001LWX Manuale utente

Konig

Konig HAV-SR41 Manuale utente

Roberts

Roberts exprssion Manuale utente

VDigi

VDigi DD3.0 Manuale utente

Radio Shack

Radio Shack 21-1863 Manuale utente

Roberts

Roberts Stream 207 Manuale utente

Sony

Sony Walkman SRF-M97 Manuale utente

Stanley

Stanley FatMax FMC770 Manuale utente

auna

auna DAB-Radio 10026947 Manuale utente

SOUNDMASTER

SOUNDMASTER UR190 Manuale utente

HYT

HYT TC-320 Manuale utente

auna multimedia

auna multimedia Yellowstone 10026851 Manuale utente

B-Tech

B-Tech GMRS-V2 Manuale utente

Weierwei

Weierwei VEV-V8 Manuale utente

SOUNDMASTER

SOUNDMASTER DAB750 Manuale utente

Telefunken

Telefunken TF-1505 Manuale utente

Makita

Makita LXRM03 Manuale utente