ADJ ACCU-CABLE POWER BONE T1ED Manuale utente
User Manual
POWER BONE T1ED
EXTEND YOUR WORLD...
TM
2
©2023 ADJ Products, LLC all rights reserved. Information, specications, diagrams, images, and in-
structions herein are subject to change without notice. Accu Cable logo and identifying product names
and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by statutory or judicial
law or hereinafter granted. Product names used in this document may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC
brands and product names are trademarks or registered trademarks of their respective companies.
ADJ Products, LLC and all afliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as
a result of the improper, unsafe, insufcient and negligent assembly, installation, rigging, and opera-
tion of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment. Please turn off all electrical products when
they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power
when not in use. Thank you!
Date Document
Version
Software
Version DMX Channels Notes
02/06/2023 1 N/A Not Applicable Initial Version
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated version of
this document may be available online.
Please check www.adj.com for the latest revision/update of this manual
before beginning installation and/or programming.
3
TABLE OF CONTENTS
General Information 4
Key Features | Warranty Returns 5
Limited Warranty (USA Only) 6
Safety Guidelines 7
Overview 9
Installation 10
Cleaning & Maintenance 13
Dimensional Drawings 14
Specifications 15
4
INTRODUCTION
Please read and understand the instructions in this manual carefully and thoroughly before attempting
to operate this device. These instructions contain important safety and use information. This product
is intended for use by professionally trained personnel only, and is not suitable for private use.
UNPACKING
Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during shipping. If the carton is damaged,
carefully inspect the device for damage, and be sure all accessories necessary to install and operate
the device have arrived intact. In the event damage has been found or parts are missing, please contact
our customer support team for further instructions. Please do not return this device to your dealer
without rst contacting customer support. Please do not discard the shipping carton in the trash. Please
recycle whenever possible.
INCLUDED ITEMS
Omega Bracket (x1)
Power Cable (x1)
CUSTOMER SUPPORT
Contact ADJ Service for any product related service and support needs.
Also visit forums.adj.com with questions, comments or suggestions.
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
REPLACEMENT PARTS please visit parts.adj.com
Warning: To reduce the risk of shock or re, do not expose this device to rain or moisture!
Warning: There are no user serviceable parts inside this unit. Do not attempt to perform any repairs
yourself, as doing so will void your manufacturer’s warranty. Damage resulting from modications to this
device and/or the disregard of safety instructions and guidelines in this manual void the manufacturer’s
warranty and are not subject to warranty claims and/or repairs.
GENERAL INFORMATION
5
KEY FEATURES
WARRANTY RETURNS
All returned service items,whether under warranty or not, must be freight pre-paid and accompanied
by a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A. number must also be written
down on a piece of paper included in the shipping carton. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain anR.A. number by contacting our cus-
tomer support team. All packages returned to the service department not displaying anR.A. number on
the outside of the package will be returned to the shipper.
• Daisy chain linking capability to get power where you need it
• Outdoor power locking input connection to supply main power
• Outdoor power locking thru connection to link to other Power Bones
• 4x indoor Edison sockets to connect to targeted equipment
• 2x USB sockets: 5V-2.1A and 5V-1.3A
• LED power indicator
• Omega bracket for clamp / truss mount
6
LIMITED WARRANTY (USA ONLY)
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of
manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see
specic warranty period on reverse). This warranty shall be valid only if the product is purchased within the
United States of America, including possessions and territories. It is the owner’s responsibility to establish
the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, you must obtain a Return Authorization number (RA#) before sending the product
back—please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to
the ADJ Products, LLC factory. All shipping charges must be prepaid. If the requested repairs or service
(including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return ship-
ping charges only to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package and packaging material. No accessories should be shipped with the product.
If any accessories are shipped with the product, ADJ Products, LLC shall incur no liability whatsoever for
loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is
modied in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the
product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory
unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is dam-
aged because it was not properly maintained as set forth in the product instructions, guidelines and/or user
manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic check-
up. During the period specied above, ADJ Products, LLC will replace defective parts at its expense with
new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of
defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall
be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ
Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear
identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products
without any obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with
products described above. Except to the extent prohibited by applicable law, all implied warranties made by
ADJ Products, LLC in connection with this product, including warranties of merchantability or tness, are
limited in duration to the warranty period set forth above. And all warranties, whether expressed or implied,
including warranties of merchantability or tness, are limited in duration to the warranty period set forth
above. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall ADJ Product, LLC be liable for any loss and/or damage,
direct and/or consequential arising out of the use of, and/or inability to use this product.
G. This warranty is the only written warranty applicable to ADJ Products, LLC products, and supersedes all
prior warranties and written descriptions of warranty terms and conditions heretofore published.
MANUFACTURER’S LIMITED WARRANTY PERIODS:
• Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting,
UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands,
Power/Data Distribution, etc. excluding LED and lamps)
• Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)
• LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)
• NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to product purchased within the United States.
StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)
• ADJ DMX Controllers = 2 Year (730 Days)
• American Audio Products = 1 Year (365 Days)
7
SAFETY GUIDELINES
For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You
Attempt To Install Or Operate This Unit!
• Be sure to save the packing carton in the unlikely event the device has to be returned for service.
• Do not spill water or other liquids into or on to the device.
• Be sure that the voltage of the power source matches the required voltage for the xture(s) that you are
running in conjunction with this device.
• Do not open up the device for any reason. There are no user serviceable parts inside.
• Never connect this device to a dimmer pack.
• Do not attempt to operate this device if it has been damaged in any way.
• Never operate this device with the cover removed.
• To reduce the risk of electrical shock or re, do not expose this device to rain or moisture.
• Do not attempt to operate this device if the power cord has been frayed or broken.
• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce
the risk of electrical shock and re in the event of an internal short.
• Disconnect from main power before making any type of connection.
• This ight case and charging system are intended for indoor use only. Use of these devices outdoors voids
all warranties.
• Always mount this unit in a safe and stable matter.
• Please route your power cord out of the way of foot trafc. Power cords should be routed so they are not
likely to be walked on, or pinched by items placed upon or against them
Maximum ambient operational temperature is 95°F (35°C). It is important to also consider the ambient
temperature restrictions of the xture(s) that you are using in conjunction with this device. Do not oper-
ate when ambient temperature falls outside the acceptable range of this device or any xtures that are
being used in conjunction with this device!
Keep ammable materials away from this device and any xture(s) that the device may be connected to!
The device should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen on, or liquid has been spilled into, the device.
C. The flight case or charging devices have been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in performance.
8
SAFETY GUIDELINES
This xture is a sophisticated piece of electronic equipment. To guarantee smooth operation, it is
important to follow all instructions and guidelines in this manual. ADJ Products, LLC is not respon-
sible for injury and/or damages resulting from the misuse of this xture due to the disregard of the
information printed in this manual. Only qualied and/or certied personnel should perform instal-
lation of this xture, and only the original rigging parts included with this xture should be used for
installation. Any modications to the xture and/or the included mounting hardware will void the
original manufacturer’s warranty and increase the risk of damage and/or personal injury
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID
YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING
FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD
OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL
VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT
TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG DEVICE INTO A DIMMER PACK!
NEVER OPEN THIS DEVICE WHILE IN USE!
UNPLUG POWER BEFORE SERVICING DEVICE!
NEVER TOUCH DEVICE DURING OPERATION, AS IT MAY BE HOT!
KEEP FLAMMABLE MATERIALS AWAY FROM DEVICEE!
9
OVERVIEW
USB
Outputs
DC 5V 2.1A/Ch
Total 3.4A Max
Power
In
AC 125V/60Hz
15A Max
Power
Out to
Devices
AC 125V/60Hz each
Max 15A each
Power
Thru
AC 125V/60Hz
15A Max
Omega
Bracket
Mounting
Points
Power
Out to
Devices
AC 125V/60Hz each
Max 15A each
Power
Indicator
Power
Indicator
Power
Indicator
10
INSTALLATION
FLAMMABLE MATERIAL WARNING!
Keep device a minimum of 5.0 feet (1.5m) away from ammable material and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualied electrician should be used for all electrical connections and/or installations.
DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED TO DO SO!
The unit MUST be installed following all local, national, and country commercial electrical and con-
struction codes and regulations.
Before installing or mounting any device, a professional equipment installer MUST be consulted to
determine whether the mounting structure or surface is properly certied to safely support the com-
bined weight of the xture, clamps, cables, and accessories.
Maximum ambient operating temperature range is 95 degrees F (35 degrees C). Do not operate the
device if ambient temperature exceeds this limit.
This xture should be installed away from walking paths, seating areas, and areas within reach of the
general public.
NEVER stand directly below the xture when rigging, removing, or servicing.
Allow approximately 15 minutes for the xture to cool down before servicing.
Indice
