ADLINK Technology MCM-100 Manuale utente

Leading EDGE COMPUTING

MCM-100/102

Edge IoT Platform for

Machine Condition Monitoring

User’s Manual

Manual Rev.: 1.0

Revision Date: June 18, 2019

Part No: 50-1Z298-1000

Leading EDGE COMPUTING

Revision History

Revision Release Date Description of Change(s)

1.0 June 18, 2019 Initial Release

Preface iii

MCM-100/102

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsi-

bility to global environmental preservation

through compliance with the European Union's

Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic

Equipment (WEEE) directive. Environmental pro-

tection is a top priority for ADLINK. We have

enforced measures to ensure that our products,

manufacturing processes, components, and raw

materials have as little impact on the environment as possible.

When products are at their end of life, our customers are encour-

aged to dispose of them in accordance with the product disposal

and/or recovery programs prescribed by their nation or company.

iv Preface

Leading EDGE COMPUTING

Battery Labels (for products with battery)

California Proposition 65 Warning

WARNING: This product can expose you to chemicals

including acrylamide, arsenic, benzene, cadmium,

Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4-

Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC,

and vinyl materials, which are known to the State of California to

cause cancer, and acrylamide, benzene, cadmium, lead, mercury,

phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and

vinyl materials, which are known to the State of California to cause

birth defects or other reproductive harm. For more information go

to www.P65Warnings.ca.gov.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

ᘄ㟁ụㄳᅇᨲ

Preface v

MCM-100/102

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

vi Preface

Leading EDGE COMPUTING

This page intentionally left blank.

Table of Contents vii

MCM-100/102

Table of Contents

Preface .................................................................................... iii

List of Tables........................................................................ xiii

List of Figures ....................................................................... xv

1 Introduction ........................................................................ 1

1.1 Features............................................................................... 1

1.2 Specifications....................................................................... 2

1.2.1 General....................................................................... 2

1.2.2 I/O............................................................................... 3

1.2.3 Power Consumption ................................................... 6

1.3 Mechanical Drawings........................................................... 8

1.4 I/O Connectors................................................................... 10

1.4.1 Power Button ............................................................ 12

1.4.2 Reset Button............................................................. 13

1.4.3 DisplayPort Connector.............................................. 13

1.4.4 LED Indicators .......................................................... 14

1.4.5 DB-9P COM Port Connector .................................... 14

1.4.6 Dual Gigabit Ethernet Ports...................................... 15

1.4.7 USB 3.0 Port............................................................. 16

1.4.8 BNC Connectors....................................................... 16

1.4.9 4-pin GPI/O w/ DGND Connector............................. 17

1.4.10 DC Power Supply Connector.................................... 17

1.5 Adapters and Other Accessories ....................................... 17

2 Getting Started ................................................................. 19

2.1 Unpacking Checklist .......................................................... 19

2.2 Connecting DC Power ....................................................... 19

2.3 DIN Rail Mounting.............................................................. 19

2.4 Wall Mounting .................................................................... 22

viii Table of Contents

Leading EDGE COMPUTING

2.5 Cooling Considerations...................................................... 23

2.6 Installing Mini-PCIe WiFi Module (Optional) ...................... 24

3 Driver & Application Installation ..................................... 29

3.1 Installing the Chipset Driver ............................................... 29

3.2 Installing the Graphics Driver............................................. 30

3.3 Installing the Ethernet Driver.............................................. 30

3.4 Installing the USB 3.0 Driver.............................................. 31

3.5 Installing the I/O Controller Driver...................................... 31

3.6 Installing the SEMA Utility, WDT and DI/O Drivers............ 31

3.7 Installing AI and DI/O Drivers............................................. 32

MAPS Core ................................................................... 32

DAQ-LVIEW Plus .......................................................... 33

4 Operation ........................................................................... 35

4.1 Analog Input....................................................................... 35

4.1.1 Analog Input Front End Configuration ...................... 35

Input Configuration: Differential/Pseudo-Differential ..... 35

Input Coupling ............................................................... 36

IEPE Input ..................................................................... 36

4.1.2 AI Data Format ......................................................... 37

4.1.3 Sampling Rate .......................................................... 37

DDS Timing/Sampling Rate .......................................... 37

4.1.4 Data Transfer............................................................ 38

Software Polling Data Transfer

(Non-Buffering Programmed I/O) .................................. 38

Continuous Acquisition Mode ....................................... 38

4.1.5 Anti-Aliasing Filter and Frequency Response........... 38

4.2 Triggering........................................................................... 40

4.2.1 Analog Input Trigger Source..................................... 40

Software Triggering ...................................................... 40

External Analog Trigger ................................................ 41

Table of Contents ix

MCM-100/102

External Digital Triggering ............................................ 42

Trigger Modes ............................................................... 43

Delay-Trigger Acquisition (no retrigger) ........................ 44

Middle-Trigger Acquisition ............................................ 45

Gated Trigger ................................................................ 45

Post-Trigger or Delay-Trigger Acquisition

with Re-Trigger ............................................................. 46

4.3 Programmable Function I/O............................................... 46

4.3.1 Static Digital Input/Output......................................... 46

4.3.2 Frequency Counter................................................... 46

4.3.3 Pulse Output............................................................. 47

4.3.4 Digital Trigger IN for Continuous Analog Input ......... 47

4.3.5 Synchronization Sample Clock IN ............................ 47

5 Calibration......................................................................... 49

5.1 Loading Calibration Constants........................................... 49

5.2 Auto-Calibration ................................................................. 49

5.3 Saving Calibration Constants ............................................ 50

A Appendix: BIOS Setup...................................................... 51

A.1 Main ................................................................................... 52

A.1.1 BIOS Information ...................................................... 52

A.1.2 System Time/System Date ....................................... 52

A.1.3 Board Information ..................................................... 53

A.2 Advanced........................................................................... 54

A.2.1 CPU Configuration.................................................... 55

Active Processor Cores ................................................ 55

Intel Virtualization Technology ...................................... 55

VT-d .............................................................................. 55

Turbo Mode .................................................................. 55

Critical Trip Point .......................................................... 56

Passive Cooling Trip Point ............................................ 56

xTableofContents

Leading EDGE COMPUTING

A.2.2 Graphics Configuration ............................................. 56

GTT Size ....................................................................... 56

Aperture Size ................................................................ 56

DVMT Pre-Allocated ..................................................... 57

DVMT Total Gfx Mem ................................................... 57

A.2.3 Onboard Device Configuration ................................. 57

COM1 Control ............................................................... 57

COM2 Control ............................................................... 57

HSUART ....................................................................... 58

LAN #1 (Intel I210) ........................................................ 58

LAN #2 (Intel I210) ........................................................ 58

Realtek Audio Support .................................................. 58

Console Redirection ..................................................... 59

Console Redirection Settings (COM 1) ......................... 59

Console Redirection ..................................................... 62

Console Redirection Settings (COM 2) ......................... 62

A.2.4 Advanced Power Management................................. 64

Power Supply Unit ........................................................ 65

State After G3 ............................................................... 65

RTC Wake system from S5 .......................................... 65

LAN #1 Wake ................................................................ 65

LAN #2 Wake ................................................................ 65

A.2.5 USB Configuration .................................................... 66

XHCI Hand-off .............................................................. 66

USB Mass Storage Driver Support ............................... 66

USB transfer time-out ................................................... 66

Device reset time-out .................................................... 66

Device power-up delay ................................................. 67

A.2.6 SATA Configuration.................................................. 67

Port ............................................................................... 67

A.2.7 TPM Configuration.................................................... 68

Security Device Support ............................................... 68

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ADLINK Technology Hardware per computer

ADLINK Technology

ADLINK Technology EGX-MXM-A1000 Manuale utente

ADLINK Technology

ADLINK Technology NuDAQ ACL-8216 Manuale utente

ADLINK Technology

ADLINK Technology NuDAQ PCI-9222 Manuale utente

ADLINK Technology

ADLINK Technology Express-BD74 Manuale utente

ADLINK Technology

ADLINK Technology VPX3020 Series Manuale utente

ADLINK Technology

ADLINK Technology PXES-2301 Manuale utente

ADLINK Technology

ADLINK Technology NuIPC cPCI-3700 Manuale utente

ADLINK Technology

ADLINK Technology COM Express cExpress-TL Manuale utente

ADLINK Technology

ADLINK Technology Express-KL Manuale utente

ADLINK Technology

ADLINK Technology EGX-MXM-RTX3000 Manuale utente

ADLINK Technology

ADLINK Technology cPCI-6530 Series Manuale utente

ADLINK Technology

ADLINK Technology ROScube-I Series Manuale utente

ADLINK Technology

ADLINK Technology cPCIS-6400U Series Manuale utente

ADLINK Technology

ADLINK Technology ETX-BT Manuale utente

ADLINK Technology

ADLINK Technology Express-KL2 Manuale utente

ADLINK Technology

ADLINK Technology arm AMPERE COM-HPC-ALT Manuale utente

ADLINK Technology

ADLINK Technology aTCA-80606PA Manuale utente

ADLINK Technology

ADLINK Technology aTCA-80302PA Manuale utente

ADLINK Technology

ADLINK Technology VPX3001 Series Manuale utente

ADLINK Technology

ADLINK Technology cPCIS-1100 Series Manuale utente

ADLINK Technology

ADLINK Technology cPCI-9116 Manuale utente

ADLINK Technology

ADLINK Technology HPERC-IBR-MC Manuale utente

ADLINK Technology

ADLINK Technology PCIe-U30 Series Manuale utente

ADLINK Technology

ADLINK Technology AMSTX-CF Series Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente