ADLINK Technology NanoX-AL Manuale utente

Leading EDGE COMPUTING

nanoX-AL

User’s Manual

COM Express Mini Size Type 10 Module with

Intel Atom®, Pentium®, Celeron® SoC

Manual Rev.: 1.3

Revision Date: July 16, 2020

Part Number: 50-1J088-1030

ii Preface

Preface

means in any form without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and

function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer

be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use

the product or documentation, even if advised of the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation

through compliance with the European Union's Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have enforced measures to ensure that our products,

manufacturing processes, components, and raw materials have as little impact on the

environment as possible. When products are at their end of life, our customers are encouraged

to dispose of them in accordance with the product disposal and/or recovery programs

prescribed by their nation or company.

Battery Labels (for products with battery)

廢電池請回收

California Proposition 65 Warning

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene,

cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP,

styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause

cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other

reproductive harm. For more information go to www.P65Warnings.ca.gov.

Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or

registered trademarks of their respective companies.

Revision History

Revision Description Date By

1.0 Initial release 2018-04-02 JC

1.1 Correct LVDS specification 2019-11-18 JC

1.2 Update dual BIOS to “build option”; update Ethernet controller temperature support 2019-12-06 JC

1.3 Correct GBE0_MDI0- pin number 2020-07-16 JC

nanoX-AL

Preface iii

Table of Contents

Preface................................................................................................................................ii

List of Figures ..................................................................................................................vii

List of Tables...................................................................................................................viii

1. Introduction................................................................................................................1

2. Specifications............................................................................................................3

2.1. Core System ...............................................................................................................3

2.2. Expansion Busses ......................................................................................................3

2.3. Video...........................................................................................................................4

2.4. Audio...........................................................................................................................4

2.5. LAN.............................................................................................................................4

2.6. Multi I/O and Storage..................................................................................................4

2.7. Serial I/O on Module ...................................................................................................5

2.8. Trusted Platform Module (TPM) .................................................................................5

2.9. SEMA Board Controller ..............................................................................................5

2.10. Debug......................................................................................................................6

2.11. Power Specifications ...............................................................................................6

2.12. Power Consumption ................................................................................................6

2.13. Operating Temperatures .........................................................................................6

2.14. Environmental .........................................................................................................6

2.15. Specification Compliance ........................................................................................6

2.16. Operating Systems..................................................................................................7

2.17. Functional Diagram .................................................................................................8

2.18. Mechanical Drawing ................................................................................................9

3. Pinouts and Signal Descriptions............................................................................11

3.1. AB/CD Pin Definitions...............................................................................................11

3.2. Signal Description Terminology ................................................................................14

3.3. AB Signal Descriptions .............................................................................................15

3.3.1. Audio Signals ..................................................................................................................... 15

3.3.2. LVDS/eDP.......................................................................................................................... 15

3.3.3. DDI0 Channel ....................................................................................................................16

3.3.4. Gigabit Ethernet ................................................................................................................. 16

3.3.5. SATA.................................................................................................................................. 17

3.3.6. PCI Express ....................................................................................................................... 17

3.3.7. Express Card (Not supported) ........................................................................................... 18

3.3.8. LPC Bus ............................................................................................................................. 18

iv Preface

3.3.9. USB 1.1/2.0........................................................................................................................ 18

3.3.10. USB 3.0 Extension........................................................................................................... 19

3.3.11. USB Root Segmentation.................................................................................................. 20

3.3.12.

SPI (BIOS only)

................................................................................................................ 21

3.3.13. Miscellaneous .................................................................................................................. 21

3.3.14. SMBus.............................................................................................................................. 22

3.3.15. I2C Bus ............................................................................................................................ 22

3.3.16. General Purpose I/O (GPIO)............................................................................................ 22

3.3.17. Serial Interface Signals .................................................................................................... 23

3.3.18. Power And System Managemen

.................................................................................... 23

3.3.19. Power and Ground........................................................................................................... 24

4. Module Interfaces....................................................................................................25

4.1. Connector, Switch and LED Locations .....................................................................25

4.2. 40-pin Debug Connector...........................................................................................26

4.3. Status LEDs..............................................................................................................28

4.4. MIPI60 Debug Header (build option) ........................................................................29

4.5. Switch Settings .........................................................................................................30

5. Smart Embedded Management Agent (SEMA) .....................................................31

5.1. Board Specific SEMA Functions...............................................................................32

5.1.1. Voltages ............................................................................................................................. 32

5.1.2. Main Current ...................................................................................................................... 32

5.1.3. BMC Status........................................................................................................................ 32

5.1.4. Exception Codes................................................................................................................ 33

5.1.5. BMC Flags ......................................................................................................................... 33

6. System Resources ..................................................................................................35

6.1. System Memory Map................................................................................................35

6.2. I/O Map .....................................................................................................................35

6.3. Interrupt Request (IRQ) Lines...................................................................................37

6.4. PCI Configuration Space Map ..................................................................................40

6.5. PCI Interrupt Routing Map ........................................................................................41

6.6. SMBus Address Table ..............................................................................................42

7. BIOS Setup...............................................................................................................43

7.1. Menu Structure .........................................................................................................43

7.2. Main ..........................................................................................................................44

7.2.1. Main > BIOS Information ................................................................................................... 44

7.2.2. Main > System Information ................................................................................................ 44

7.2.3. Main > Board Information .................................................................................................. 45

7.2.4. Main >System Date/Time .................................................................................................. 45

nanoX-AL

Preface v

7.2.5. Main >Access Level........................................................................................................... 45

7.3. Advanced..................................................................................................................46

7.3.1. Advanced > CPU Configuration......................................................................................... 46

7.3.2. Advanced > Graphics Configuration .................................................................................. 48

7.3.3. Advanced > Power Management....................................................................................... 49

7.3.4. Advanced > System Management..................................................................................... 50

7.3.5. Advanced > Thermal Management.................................................................................... 50

7.3.6. Advanced > Watchdog Timer ............................................................................................ 51

7.3.7. Advanced > CSM Configuration ........................................................................................ 51

7.3.8. Advanced > Super IO Configuration.................................................................................. 51

7.3.9. Advanced > Serial Console Redirection ............................................................................ 53

7.3.10. Advanced > USB.............................................................................................................. 55

7.3.11. Advanced > Network........................................................................................................ 56

7.3.12. Advanced > Miscellaneous .............................................................................................. 56

7.3.13. Advanced > Driver Health................................................................................................ 56

7.3.14. Advanced > Trusted Computing ...................................................................................... 56

7.3.15. Advanced > Trusted Computing ...................................................................................... 57

7.4. Chipset......................................................................................................................58

7.4.1. Chipset > North Bridge ...................................................................................................... 58

7.4.2. Chipset > South Bridge...................................................................................................... 58

7.4.3. Chipset > Uncore Configuration......................................................................................... 58

7.4.4. Chipset > South Cluster Configuration .............................................................................. 60

7.5. Security.....................................................................................................................69

7.5.1. Security > Password Description ....................................................................................... 69

7.6. Boot ..........................................................................................................................70

7.6.1. Boot > Boot Configuration.................................................................................................. 70

7.6.2. Boot > FIXED BOOT ORDER Priorities............................................................................. 70

7.7. Save & Exit ...............................................................................................................71

8. BIOS Checkpoints, Beep Codes.............................................................................73

8.1. Status Code Ranges.................................................................................................74

8.2. Standard Status Codes.............................................................................................74

8.2.1. SEC Phase......................................................................................................................... 74

8.2.2. SEC Beep Codes............................................................................................................... 75

8.2.3. PEI Phase .......................................................................................................................... 75

8.2.4. PEI Beep Codes ................................................................................................................ 77

8.2.5. DXE Status Codes ............................................................................................................. 78

8.2.6. DXE Beep Codes............................................................................................................... 80

8.2.7. ACPI/ASL Checkpoint........................................................................................................ 80

8.3. OEM-Reserved Checkpoint Ranges......................................................................... 81

vi Preface

9. Mechanical Information...........................................................................................83

9.1. Board-to-Board Connectors......................................................................................83

9.2. Thermal Solution.......................................................................................................84

9.2.1. Heat Spreaders..................................................................................................................84

9.2.2. Heat Sinks.......................................................................................................................... 84

9.2.3. Installation.......................................................................................................................... 84

9.3. Mounting Methods ....................................................................................................86

9.4. Standoff Types..........................................................................................................87

Safety Instructions...........................................................................................................88

Getting Service.................................................................................................................89

nanoX-AL

Preface vii

List of Figures

Figure 1: nanoX-AL Functional Block Diagram ........................................................................................8

Figure 2: nanoX-AL Mechanical Drawing.................................................................................................9

Figure 3: nanoX-AL Connector, Switch and LED Locations ................................................................. 25

Figure 4: nanoX-AL and the DB40 Debug Module................................................................................ 25

Figure 5: cExpress Switch Locations .................................................................................................... 30

Figure 6: COM Express Mounting Methods ..........................................................................................86

Figure 7: COM Express Standoff Types................................................................................................ 87

viii Preface

List of Tables

Table 1: nanoX-AL Type 10 COM.0 Rev. 3.0 Pin Definitions ............................................................... 11

Table 2: 40-pin Debug Connector Pin Definition ................................................................................... 27

Table 3: nanoX-AL LED Descriptions.................................................................................................... 28

Table 4: MIPI60 Debug Header Pin Definition ...................................................................................... 29

Table 5: BIOS Select and Mode Configuration Switch Settings............................................................ 30

Table 6: SEMA Onboard Voltage Monitor ............................................................................................. 32

Table 7: SEMA BMC Status .................................................................................................................. 32

Table 8: SEMA Exception Codes .......................................................................................................... 33

Table 9: SEMA BMC Flags.................................................................................................................... 33

nanoX-AL

Introduction 1

1. Introduction

The nanoX-AL is a COM Express® COM.0 R3.0 Type 10 module supporting Intel Atom® processor E3900 series

system-on-chip (SoC). The nanoX-AL is specifically designed for customers who need optmized processing and

graphics performance with low power consumption in a long product life solution.

The nanoX-AL features the dual/quad core Intel Atom® processor E3900 series supporting non-ECC type DDR3L

single-channel or dual-channel memory at 1600/1867 MHz to provide excellent overall performance. Integrated

Intel® Gen9 LP Graphics includes features such as OpenGL 4.3, DirectX 12, OpenCL 2.0 and support for

H.265/HEVC, H.264, MPEG2, VC1, VP9, MVC, JPEG/MJPEG hardware decode. Graphics outputs include DDI

ports supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP by build option). The nanoX-AL is

specifically designed for customers with balanced performance and power consumption requirements who want to

outsource the custom core logic of their systems for reduced development time.

The nanoX-AL has 2GB of soldered type non-ECC DDR3L memory (4GB and 8GB optional). In addition, onboard

eMMC memory (8GB/16GB/32GB) and SD signals are available as build options.

The nanoX-AL features a single onboard Gigabit Ethernet port, multiple PCIe lanes, USB 3.0 ports and USB 2.0

ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI

BIOS (dual BIOS by build option), supporting embedded features such as remote console, CMOS backup,

hardware monitor, and watchdog timer.

2 Introduction

This page intentionally left blank.

Indice

Altri manuali ADLINK Technology Hardware per computer

ADLINK Technology

ADLINK Technology cPCI-8586 Manuale utente

ADLINK Technology

ADLINK Technology cPCI-9116 Manuale utente

ADLINK Technology

ADLINK Technology nanoX-TCR Manuale utente

ADLINK Technology

ADLINK Technology MCM-100 Manuale utente

ADLINK Technology

ADLINK Technology VPX3-TL Series Manuale utente

ADLINK Technology

ADLINK Technology Com Express nanoX-BT Manuale utente

ADLINK Technology

ADLINK Technology NuDAQ DAQ-2500 Series Manuale utente

ADLINK Technology

ADLINK Technology NuDAQ PCI-9111DG Manuale utente

ADLINK Technology

ADLINK Technology PXES-2301 Manuale utente

ADLINK Technology

ADLINK Technology Express-SL2 Manuale utente

ADLINK Technology

ADLINK Technology SMARC MODULE LEC-EL Manuale del proprietario

ADLINK Technology

ADLINK Technology cPCI-3520 Series Manuale utente

ADLINK Technology

ADLINK Technology DLAP-211-JNX Series Manuale utente

ADLINK Technology

ADLINK Technology 10GbE BASE-T Manuale utente

ADLINK Technology

ADLINK Technology cPCI-3630 Series Manuale utente

ADLINK Technology

ADLINK Technology NuIPC cPCI-3700 Manuale utente

ADLINK Technology

ADLINK Technology MXM-P1000 Manuale utente

ADLINK Technology

ADLINK Technology AMSTX-CF Series Manuale utente

ADLINK Technology

ADLINK Technology NuPRO-E72 Manuale utente

ADLINK Technology

ADLINK Technology DLAP-301 Series Manuale utente

ADLINK Technology

ADLINK Technology EC-8560 Manuale utente

ADLINK Technology

ADLINK Technology MCM-216 Manuale utente

ADLINK Technology

ADLINK Technology cPCI-6525 Manuale utente

ADLINK Technology

ADLINK Technology GEME-4000 Series Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente

ADLINK Technology nanoX-AL Manuale utente

Manuali Hardware per computer popolari di altre marche