ADLINK Technology NuDAQ PCI-9222 Manuale utente
Advance Technologies; Automate the World.
Manual Rev. 2.00
Revision Date: April 24, 2008
Part No: 50-11237-1000
NuDAQ®PCI-9222
NuDAQ® PCI-9223
16-bit High-Performance DAQ Card with
Programmable Function I/O
User’s Manual
Copyright 2008 ADLINK TECHNOLOGY INC.
All Rights Reserved.
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Trademarks
NuDAQ, NuIPC, DAQBench are registered trademarks of ADLINK
TECHNOLOGY INC.
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Getting service
Customer satisfaction is our top priority. Contact us should you
require any service or assistance.
ADLINK TECHNOLOGY INC.
Web Site http://www.adlinktech.com
Telephone No. +886-2-8226-5877
Fax No. +886-2-8226-5717
Mailing Address 9F No. 166 Jian Yi Road, Chungho City,
Taipei Hsien 235, Taiwan, ROC
ADLINK TECHNOLOGY AMERICA, INC.
Sales & Service info@adlinktech.com
Toll-Free +1-866-4-ADLINK (235465)
Fax No. +1-949-727-2099
Mailing Address 8900 Research Drive, Irvine,
CA 92618, USA
ADLINK TECHNOLOGY EUROPEAN SALES OFFICE
Toll-Free +49-211-4955552
Fax No. +49-211-4955557
Mailing Address Nord Carree 3, 40477 Düsseldorf, Germany
ADLINK TECHNOLOGY SINGAPORE PTE LTD
Sales & Service singapore@adlinktech.com
Telephone No. +65-6844-2261
Fax No. +65-6844-2263
Mailing Address 84 Genting Lane #07-02A,
Cityneon Design Center, Singapore 349584
ADLINK TECHNOLOGY INDIA LIAISON OFFICE
Telephone No. +91-80-57605817
Fax No. +91-80-26671806
Mailing Address No. 1357, Ground Floor, "Anupama",
Aurobindo Marg JP Nagar (Ph-1)
Bangalore - 560078
ADLINK TECHNOLOGY KOREA
Telephone No. +82-2-20570565
Fax No. +82-2-20570563
Mailing Address #402, Dongsung B/D, 60-12,
Nonhyeon-Dong Gangnam-gu,
Seoul, 135-010, South Korea
ADLINK TECHNOLOGY BEIJING
Telephone No. +86-10-5885-8666
Fax No. +86-10-5885-8625
Mailing Address Room 801, Building E, Yingchuangdongli
Plaza, No.1 Shangdidonglu,
Haidian District, Beijing, China
ADLINK TECHNOLOGY SHANGHAI
Telephone No. +86-21-6495-5210
Fax No. +86-21-5450-0414
Mailing Address Floor 4, Bldg. 39, Caoheting Science and
Technology Park, No.333 Qinjiang Road,
Shanghai, China
ADLINK TECHNOLOGY SHENZHEN
Telephone No. +86-755-2643-4858
Fax No. +86-755-2664-6353
Mailing Address C Block, 2nd Floor, Building A1,
Cyber-tech Zone, Gaoxin Ave. 7.S,
High-tech Industrial Park S.,
Nanshan District, Shenzhen,
Guangdong Province, China
Using this manual
1.1 Audience and scope
This manual guides you when using ADLINK high-performance
data acquisition PCI card. The card’s hardware, signal connec-
tions, and calibration information are provided for faster applica-
tion building. This manual is intended for computer programmers
and hardware engineers with advanced knowledge of data acqui-
sition and high-level programming.
1.2 How this manual is organized
This manual is organized as follows:
Chapter 1 Introduction: This chapter introduces the ADLINK
NuDAQ PCI-9222 and NuDAQ PCI-9223 cards including their
features, specifications, software support information, and
package contents.
Chapter 2 Hardware Information: This chapter presents the
card’s layout, connector pin assignment, signal descriptions,
and analog input signal connection.
Chapter 3 Installation: This part describes the PCI-9222/PCI-
9223 installation and configuration.
Chapter 4 Operation Theory: The operation theory of the
PCI-9222/PCI-9223 card functions are discussed in this chap-
ter. These include A/D conversion, D/A conversion, program-
mable function I/O, application function I/O, digital waveform
acquisition, isolation encoder, and trigger sources.
Chapter 5 Calibration: The chapter offers information on how
to calibrate the PCI-9222/PCI-9223 for accurate data acquisi-
tion and measurement.
Warranty Policy: This presents the ADLINK Warranty Policy
terms and coverages.
1.3 Conventions
Take note of the following conventions used throughout the man-
ual to make sure that you perform certain tasks and instructions
properly.
NOTE Additional information, aids, and tips that help you per-
form particular tasks.
IMPORTANT Critical information and instructions that you MUST perform to
complete a task.
WARNING Information that prevents physical injury, data loss, mod-
ule damage, program corruption, and others when trying
to complete a particular task.
Table of Contents i
Table of Contents
List of Tables.......................................................................... iii
List of Figures ........................................................................ iv
1 Introduction ........................................................................ 1
1.1 Features............................................................................... 2
1.2 Applications ......................................................................... 2
1.3 Specifications....................................................................... 3
1.4 Unpacking Checklist ............................................................ 8
1.5 Software Support ................................................................. 8
Driver Support for Windows ............................................ 9
2 Hardware Information ...................................................... 13
2.1 Card Layout ....................................................................... 13
2.2 Connector Pin Assignment ................................................ 13
CN1 Pin Assignment ..................................................... 14
CN2 Pin Assignment ..................................................... 16
CN1/CN2 Signal Descriptions ....................................... 17
SSI Connector Pin Assignment .................................... 18
SSI Connector Signal Description ................................ 19
2.3 Analog Input Signal Connection ........................................ 20
Types of Signal Sources ............................................... 20
Input Configurations ...................................................... 21
3 Installation ........................................................................ 25
3.1 Before You Proceed .......................................................... 25
3.2 Installing the Card.............................................................. 25
3.3 Configuring the Card.......................................................... 26
Configuration ................................................................ 26
Troubleshooting ............................................................ 26
4 Operation Theory ............................................................. 27
4.1 Block Diagram ................................................................... 27
4.2 A/D Conversion.................................................................. 28
AI Data Format ............................................................. 29
Software Conversion with Polling Data Transfer
Acquisition Mode (Software Polling) ................... 29
Continuous Acquisition (Scanning) Mode ..................... 30
ii Table of Contents
Trigger Modes ............................................................... 33
Bus-mastering DMA Data Transfer ............................... 35
4.3 D/A Conversion.................................................................. 38
Bipolar Output Modes ................................................... 38
Software Update ........................................................... 38
Waveform Generation ................................................... 38
4.4 Programmable Function I/O............................................... 47
TTL DI/DO .................................................................... 47
General Purpose Timer/Counter ................................... 48
Basic Timer/Counter Functions .................................... 48
General Purpose Timer/Counter Modes ....................... 49
Digital Waveform Acquisition and Generation .............. 55
4.5 Isolation Encoder ............................................................... 57
4.6 Trigger Sources ................................................................. 62
Software Trigger ........................................................... 62
External Digital Trigger ................................................. 62
5 Calibration ......................................................................... 63
5.1 Loading Calibration Constants........................................... 63
5.2 Auto-calibration .................................................................. 63
5.3 Saving Calibration Constants............................................. 64
Warranty Policy ..................................................................... 65
List of Tables iii
List of Tables
Table 2-1: CN1 Pin Assignment for PCI-9222 ......................... 14
Table 2-2: CN1 Pin Assignment for PCI-9223 ......................... 15
Table 2-3: CN2 Pin Assignment for PCI-9222/PCI-9223 ......... 16
Table 2-4: CN1/CN2 Signal Description .................................. 17
Table 2-5: SSI Connector Pin Assignment .............................. 18
Table 2-6: SSI Connector Signal Description .......................... 19
Table 4-1: Bipolar Analog Input Range and
Output Digital Code ................................................ 29
Table 4-2: Bipolar Analog Input Range and
Output Digital Code ................................................ 29
Table 4-3: Bipolar Output Codes ............................................. 38
Table 4-4: Summary of Counters for Waveform Generation ... 40
Table 4-5: TTL DIO Pins in CN1 .............................................. 47
Table 4-6: Timer/Counter Mode Pins in CN1 ........................... 48
Table 4-7: Encoder Pins in CN2 .............................................. 57
iv List of Figures
List of Figures
Figure 1-1: ADLINK Software Support Overview ......................... 9
Figure 1-2: DAQPilot Main Interface ............................................ 9
Figure 1-3: DAQMaster Device Manager................................... 10
Figure 1-4: Legacy Software Support Overview ........................ 11
Figure 2-1: PCI-9222/PCI-9223 Layout...................................... 13
Figure 2-2: Floating Source and RSE Input Connections .......... 21
Figure 2-3: Ground-referenced Sources and
NRSE Input Connections......................................... 22
Figure 2-4: Ground-referenced Source and Differential Input.... 22
Figure 2-5: Floating Source and Differential Input ..................... 23
Figure 4-1: PCI-9222/PCI-9223 Block Diagram ......................... 27
Figure 4-2: PCI-9222/PCI-9223 AI Circuitry............................... 28
Figure 4-3: Continuous A/D Conversion Clock Source
Block Diagram ......................................................... 30
Figure 4-4: Scan Timing............................................................. 31
Figure 4-5: Post Trigger without Retrigger ................................. 33
Figure 4-6: Post Trigger with Retrigger ...................................... 34
Figure 4-7: Gated Trigger with Finite Scan Acquisition.............. 35
Figure 4-8: Scatter-gather DMA for Data Transfer..................... 36
Figure 4-9: FIFO Data In/Out Structure...................................... 39
Figure 4-10: Waveform Generation for Three Channels Update . 39
Figure 4-11: Waveform Generation Clock Source Selection ....... 40
Figure 4-12: Typical D/A Timing of Waveform Generation .......... 41
Figure 4-13: Post-Trigger Generation .......................................... 42
Figure 4-14: Delay-Trigger Generation ........................................ 43
Figure 4-15: Post-Trigger with Retrigger Generation ................... 44
Figure 4-16: Finite Iterative Waveform Generation with
Post-trigger .............................................................. 45
Figure 4-17: Infinite Iterative Waveform Generation with
Post-trigger .............................................................. 46
Figure 4-18: Mode 1 Operation.................................................... 49
Figure 4-19: Mode 2 Operation.................................................... 50
Figure 4-20: Mode 3 Operation.................................................... 51
Figure 4-21: Mode 4 Operation.................................................... 51
Figure 4-22: Mode 5 Operation.................................................... 52
Figure 4-23: Mode 6 Operation.................................................... 52
Figure 4-24: Mode 7 Operation.................................................... 53
Figure 4-25: Mode 8 Operation.................................................... 53
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ADLINK Technology Hardware per computer
ADLINK Technology
ADLINK Technology cPCI-7300A Manuale utente
ADLINK Technology
ADLINK Technology EOS-1200 Manuale utente
ADLINK Technology
ADLINK Technology DMI-1210 Manuale utente
ADLINK Technology
ADLINK Technology aTCA-9300 Manuale utente
ADLINK Technology
ADLINK Technology 10GbE BASE-T Manuale utente
ADLINK Technology
ADLINK Technology EPS-4008 Manuale utente
ADLINK Technology
ADLINK Technology EGX-MXM-RTX3000 Manuale utente
ADLINK Technology
ADLINK Technology EBP-13E2 Manuale utente
ADLINK Technology
ADLINK Technology cPCI-3510 Manuale utente
ADLINK Technology
ADLINK Technology AmITX-CF-I Manuale utente
ADLINK Technology
ADLINK Technology VPX3000 Series Manuale utente
ADLINK Technology
ADLINK Technology cPCI-9116 Manuale utente
ADLINK Technology
ADLINK Technology Express-BD74 Manuale utente
ADLINK Technology
ADLINK Technology aTCA-80302PA Manuale utente
ADLINK Technology
ADLINK Technology LEC-BASE MINI Manuale per l'uso e la cura
ADLINK Technology
ADLINK Technology VPX3010 Series Manuale utente
ADLINK Technology
ADLINK Technology ROScube-I Series Manuale utente
ADLINK Technology
ADLINK Technology ETX-BT Manuale utente
ADLINK Technology
ADLINK Technology cPCI-3630 Series Manuale utente
ADLINK Technology
ADLINK Technology LEC-BTS Manuale per l'uso e la cura
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
