ADT Pulse OC835-ADT Manuale utente

ADT Pulse

Interactive Solutions

OC835-ADT

Wireless Outdoor HD Camera

Quick Installation Guide

Table of Contents

CHAPTER 1 INTRODUCTION ............................................................................ 3

Overview............................................................................................................... 3

Physical Details ................................................................................................... 5

Package Contents............................................................................................... 8

CHAPTER 2 BASIC SETUP................................................................................. 9

Installation............................................................................................................ 9

CHAPTER 3 ADT PULSE ENROLLMENT .......................................................11

Using a Wired Connection to Enroll the Camera .......................................11

Using a Wireless Connection Enroll the Camera .......................................15

CHAPTER 4 WALL MOUNTING ......................................................................19

APPENDIX A SPECIFICATIONS ......................................................................23

OC835-ADT Outdoor Day/Night HD Camera ............................................23

Regulatory Approvals ......................................................................................24

Property of ADT, LLC. Information accurate as of published date and is provided “as is”

without warranty of any kind.

ADT.ASAP and the product/service names listed in this document are marks and/or

registered marks. Unauthorized use is strictly prohibited.

OC835-ADT-QIG-01 (09/15)

2 OC835-ADT Outdoor HD Camera Installation Guide

Chapter 1

Introduction

This section provides information about the OC835-ADT Outdoor Day/Night HD

Camera's features, components and capabilities.

Overview

The OC835-ADT is a true outdoor day/night wireless camera with HD resolution,

802.11n Wi-Fi connectivity and Wi-Fi Protected Setup (WPS) support. This

camera is intended for use with ADT Pulse®.

Features

•Standalone Design. The camera is a standalone system with built-in CPU

and video encoder. It requires only a power source and a connection to the

ADT Pulse Gateway or ADT Total Security (TS) Base panel.

•Dual Video Support. The OC835-ADT supports H.264 and MJEPG video

compression.

•Day/Night Switch: With the day/night switching feature, you can view and

record images even at night.

•IR LED Support. The infrared LED can provide illumination for up to 6 meters,

providing superior video quality under low-light conditions such as on cloudy

days, or in the early morning or evening.

•PIR (Passive Infrared Sensor) Support. The embedded PIR Sensor senses

infrared light radiating from human bodies in its field of view.

•Built-in Heater. The built-in heater ensures that the camera will continue to

operate even in extremely cold outdoor climates. The heater turns on when

the temperature falls below 42°F (6°C).

OC835-ADT Outdoor HD Camera Installation Guide 3

Chapter 1 Introduction

Wireless Features

•Supports 802.11n Wireless Standard. The 802.11n standard provides

backward compatibility with the 802.11b and g standards.

•Supports WPS. Wi-Fi Protected Setup (WPS) can simplify the process of

connecting the Wireless HD Camera to the wireless network by using the push

button configuration.

•Wired and Wireless Network. The OC835-ADT can be connected to the

Pulse network wirelessly. It can also be hardwired to the network.

4 OC835-ADT Outdoor HD Camera Installation Guide

Chapter 1 Introduction

Physical Details

Front

Figure 1: Front Panel

Light Sensor

This is a hardware sensor to detect lux.

Lens

The lens cannot be adjusted. Please ensure that the lens

cover remains clean.

PIR Sensor

This is a Passive Infrared sensor to detect motion.

Light Sensor

Lens

PIR Sensor

OC835-ADT Outdoor Day/Night HD Camera Installation Guide 5

Chapter 1 Introduction

Rear

Figure 2: Rear Panel

DC Power Input

Connect the supplied 12V power adapter here. Do not

use other power adapters; doing so may damage the

camera.

Power LED

(Green, Amber)

On (Green). Power on.

Off. No power.

Blinking (Green). The Power LED blinks during start up

for approximately 1 minute.

Blinking (Amber). The firmware is being upgraded.

On (Amber). The firmware upgrade has failed.

Network/Wireless

LED

(Green, Amber)

On (Green). Network connection is available (wired or

wireless).

Off. Wired/wireless network is not connected or

camera is not sending/receiving data.

Blinking (Green). Data is being transmitted or received

via the wired/wireless connection.

On (Amber). If the LED is on for 5 seconds and then

turns off, the WPS function has failed.

Blinking (Amber). The WPS connection is active.

Network Port

WPS/Reset Button

DC Power Input

Power LED

Network/Wireless LED

6 OC835-ADT Outdoor HD Camera Installation Guide

Chapter 1 Introduction

WPS/Reset Button

This button serves two functions on the camera.

•WPS Pin Code Mode. When pressed and held for

5 seconds during the Pulse enrollment process, the

camera creates an encryption-secured wireless

connection.

•Reset. When pressed and held over 15 seconds,

the camera reboots and the settings are restored to

default values.

Network Port

Use a Micro USB to RJ-45 Adapter Cable (not included)

and a standard Ethernet cable (not included) to connect

the camera to the Pulse Gateway or TS Base panel.

Note:

•Plugging in the Micro USB to RJ-45 Adapter Cable

will disable the wireless interface. Only one

interface can be active at any time.

•The Micro USB to RJ-45 Adapter Cable should only

be connected or disconnected when the camera is

powered OFF. Attaching or detaching the Micro

USB to RJ-45 Adapter Cable while the camera is

powered on does NOT switch the interface

between wired and wireless.

OC835-ADT Outdoor Day/Night HD Camera Installation Guide 7

Chapter 1 Introduction

Package Contents

The following items are included in the package.

Figure 3: What’s in the Box

8 OC835-ADT Outdoor HD Camera Installation Guide

Chapter 2

Basic Setup

This section provides information on how to assemble and configure

the OC835-ADT Outdoor HD Camera.

Installation

1. Assemble the Camera

Attach the Camera Stand to the camera.

2. Make the Connection

Using a Wired Connection

If you are using a wired connection to the OC835-ADT, connect a Micro USB

to RJ-45 Adapter Cable (not included) to the USB port of the camera. Then use

a standard Ethernet cable (not included) to connect to the Pulse Gateway or

Total Security (TS) Base panel.

Figure 4: Wired Network Connection

Using a Wireless Connection

The wireless (WPS) connection between the camera and the Pulse Gateway or

Total Security (TS) Base panel is performed during the Pulse enrollment. This

process is detailed starting on page 15.

Note: The Wireless and LAN interfaces cannot be used

simultaneously. Making a wired LAN connection disables the

wireless interface.

OC835-ADT Outdoor HD Camera Installation Guide 9

Chapter 2 Basic Setup

3. Power Up

Connect the supplied 12V power adapter to the camera and power up. Use

only the power adapter provided. Using a different one may cause hardware

damage.

CAUTION: Use only the power adapter provided. Using a different

one can result in hardware damage.

The Power LED turns on briefly, and then starts blinking. (The Power LED will

continue to blink during startup, which takes about one minute. After startup is

completed, the Power LED should remain ON.)

4. Check the LEDs

•Power LED. At power up, the Power LED turns on briefly, and then starts

blinking, which takes about one minute. After startup has completed, the

Power LED remains on.

•Network/WPS LED. At power up, the Network/WPS LED is off.

(The Network/WPS LED will flash amber when the camera attempts to

connect wirelessly to the Pulse Gateway / TS Base. The Network/WPS

LED will turn solid green when the wireless connection is successful.)

5. Enroll the Camera in ADT Pulse

This process is described in the next chapter, ADT Pulse Enrollment.

6. Mount the Camera

Place the camera in a location near a power source. For mounting on a wall

using the mounting plate, see Chapter 4 Wall Mounting on page 19.

10 OC835-ADT Outdoor HD Camera Installation Guide

Indice

Altri manuali ADT Pulse Telecamera IP

ADT Pulse

ADT Pulse DBC835 Manuale utente

ADT Pulse

ADT Pulse RC8326 Manuale utente

ADT Pulse

ADT Pulse RC8021W-ADT Manuale utente

ADT Pulse

ADT Pulse RC8025 Manuale utente

ADT Pulse

ADT Pulse RC8325-ADT Manuale utente

ADT Pulse

ADT Pulse iCamera-1000 Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente