ADTRAN SmartRG SR400ac Manuale utente

501 SE Columbia Shores Boulevard, Suite 500

Vancouver, Washington 98661 USA

+1 360 859 1780 / smartrg.com

/ Gateway User Manual

Model: SR400ac

Release: 4.0 (SoftwareVersion 10.7.1.1) June 2019

SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019 
2
 
 
Table of Contents 
 
 
 
Welcome! 3 
Purpose & Scope 3 
Intended Audience 3 
Getting Assistance 3 
Copyright and Trademarks 3 
Disclaimer 3 
Getting Familiar with your Gateway 4 
LED Indicators 4 
Connections 5 
LAN 5 
WAN 5 
USB 5 
POWER 5 
External Buttons 6 
WPS Button (5 GHz Band) 6 
WiFi Button (2.4 GHz Band) 6 
On/Off Button 6 
Reset Button 6 
Installing your SR400ac Gateway 7 
Logging in to the SR400ac Interface 8 
Saving Your Changes 9 
Dashboard 10 
Network 11 
Status 11 
Ethernet WAN 12 
DHCP for IPv4 WANs 13 
Static Address for IPv4 WANs 14 
PPPoE for IPv4 WANs 14 
DHCPv6 for IPv6 WANs 15 
Static Address for IPv6 WANs 16 
IPTV Settings 17 
Voice Settings 18 
Management Settings 20 
Cross-Connect Settings 21 
LAN Network 22 
DHCP Server 23 
Defining a Static DHCP IP Address 25 
DHCP Clients 26 
Ethernet Ports 27 
Guest Network 28 
DHCP Server 29 
Defining a Static DHCP IP Address Association 31 
DHCP Clients 32 
Video Network 33 
Static Address 34 
DHCP 34 
DHCP Server 34 
Defining a Static DHCP IP Address 36 
DHCP Clients 37 
Multicast 37 
Video Analyzer 39 
Routing 40 
Static Routes 41 
 
 
 
 
 
 
DNS 42 
Firewall 43 
Firewall Settings 43 
Router Access 44 
Firewall Rules 45 
DMZ 47 
Port Forwarding 48 
Downstream QoS 49 
Advanced 50 
Connected Devices 50 
Intellifi Devices 51 
Device Groups 52 
Access Schedule 54 
WiFi 57 
Status 57 
Scan 57 
Radios 58 
Networks 60 
Clients 61 
Performance 61 
Client Performance 63 
Advanced 65 
Services 66 
UPNP 66 
DLNA 67 
TR-069 Configuration 67 
SNMP 70 
Hosts 71 
DDNS 72 
Cloud Storage 73 
File Sharing 74 
Content Filter 76 
Admin 78 
Update 78 
Configuration 81 
Router Management 82 
Passwords 84 
Net Tools 85 
Event Log 86 
Configuring Log Settings 87 
Time 88 
Operating Mode 88 
Reboot 90 
Logging Out 91 
Appendix: Compliance Statements 92 
FCC Interference Statement 92 
FCC Radiation Exposure Statement 92 
5GHz 92 
Revision History 93 

Welcome!

Thank you for purchasing this SmartRG product.

SmartRG offers solutions that simplify the complex Internet ecosystem. Our solutions include hardware, software, applications,

enhanced network insights, and security delivered via a future-proof operating system. Based in the USA, SmartRG provides local,

proactive software development and customer support. We proudly offer the best, most innovative broadband gateways available.

Learn more at www.SmartRG.com.

Purpose & Scope

This User Manual provides SmartRG customers with installation, configuration and monitoring information for their SR400ac gateway.

Intended Audience

The information in this document is intended for Network Architects, NOC Administrators, Field Service Technicians and other

networking professionals responsible for deploying and managing broadband access networks. Readers of this manual are assumed to

have a basic understanding of computer operating systems, networking concepts and telecommunications.

Getting Assistance

Frequently asked questions are provided at the bottom of the Support page of the SmartRG Web site.

l Subscribers: If you require further help with this product, please contact your service provider. l

Service providers: ifyou require further help with this product, please open a support request.

The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical,

photocopying, manual, or otherwise, without the prior written permission of SmartRG, Inc.

Disclaimer

SmartRG does not assume any liability arising out of the application or use of any products, or software described herein. Neither

does it convey any license under its patent rights nor patent rights of others. SmartRG further reserves the right to make changes to

any products described herein without notice. This publication is subject to change without notice.

Any trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective

owners.

Getting Familiar with your Gateway

This section explains your SR400ac gateway's lights, ports, and buttons.

LED Indicators

Your SR400ac gateway has several status indicators (LEDs) on its top which are described below.

There is also a small LED on the front of the gateway that flickers when data is being transferred.

Legend: White White blinking Green Green blinking Red

LED

Action

Explanation

POWER

Device in CFE mode

Device powered on and ready for use

WAN

Device online (at 1000 BASE-T)

Device online (at 10/100 BASE-T)

WAN Ethernet connected (at 1000 BASE-T)

Data being transferred (at 1000 BASE-T)

WAN Ethernet connected (at 10/100BASE-T)

Data being transferred (at 10/100BASE-T)

INTERNET

DSL sync acquired and gateway on line

Data being transferred

Internet authentication / connection has failed

USB / USB 3.0

USB device connected

Data being transferred

2.4 GHZ

5 GHZ

Wi-Fi enabled

Data being transferred

(locked wi-fi / WPS)

WPS enabled

Data being transferred

LAN 1-4

LAN Ethernet connected (at 1000 BASE-T)

Data being transferred (at 1000 BASE-T)

LAN Ethernet connected (at 10/100BASE-T)

Data being transferred (at 10/100BASE-T)

Connections

Your SR400ac's exterior ports are shown in the following cabling diagram.

LAN

The four yellow RJ45 Ethernet ports located on the back of your gateway (labeled LAN1, LAN2, LAN3, LAN4) are used to connect

client devices such as computers and printers to your gateway.

WAN

The red RJ45 port labeled WAN is used to hard-wire your SR400ac gateway to another network device using a RJ45/Ethernet cable.

USB

The two USB ports on your 400AC gateway (2.0 port on the back and 3.0 on the left side) are used to connect USB storage devices to

your gateway for transferring data. They also provide +5 VDC for charging other devices.

POWER

Use only the power supply supplied with your gateway.

Do NOT open the device. Opening or removing covers can expose you todangerous high voltage points or other risks. ONLY

qualified service personnel can service the device. Please contact your vendor for further information.

Use ONLY the dedicated power supply for your device. Use only the power adapter provided with your gateway (3 amp 12 v).

Intended for indoor use only.

LAN

WAN USB DC/

External Buttons

Your SR400ac gateway provides push-button controls on its exterior for critical features. These buttons provide a convenient means

to trigger WPS mode, toggle the Wi-Fi radio on and off, or reset the gateway. The button functions are described below.

WPS Button (5 GHz Band)

Wi-Fi Protected Setup™ (WPS) is a standard means for creating secure connections between your gateway and various wireless client

devices. It is designed to simplify the pairing process between devices. This button is located on the left side of your SR400ac

gateway.

When you press this button for 1-3 seconds, the WPS LED starts to flash. If no client pairs with your gateway after 2 minutes, the WPS

LED turns off.

When the gateway pairs successfully with a client, the WPS LED glows solid for 5 minutes and then turns off.

WiFi Button (2.4 GHz Band)

The WiFi button toggles the Wi-Fi radio on and off. This button is located on the left side of your SR400ac gateway. Look at the WLAN

LED indicator to determine the current state of the Wi-Fi radio.

To activate the radio, press and hold the WiFi button for 3-5 seconds then release. Expect a 1-3 second delay before the WLAN LED

turns on. The Wi-Fi radio is now on.

To deactivate the radio, press and hold the WiFi button for 3-5 seconds then release. Expect a 1-3 second delay before the WLAN

LED turns off. The Wi-Fi radio is now off.

On/Off Button

The On/Off button turns the device on and off. This button is located on the left side of your gateway.

Reset Button

The Reset button returns your gateway to its default settings.

This button is in a small circular hole in the back of the gateway case with the actual button mounted behind the surface. This

style of push button prevents the gateway from being inadvertently reset during handling.

Warning: Do not press the Reset button unless you want to clear the current settings.

If you want to restore the default settings, insert a thin wire (such as a paper clip) into the hole, press the Reset button for 1

second, and then release the button. The gateway reboots and returns to the current defaults.

To return the gateway to factory default settings, press the Reset button until the LEDs flash red and orange. The gateway reboots

and returns to the default settings applied in the factory. This process may take a few minutes.

Installing your SR400ac Gateway

1. Connect a LAN port on the SmartRG gateway to your PC using an Ethernet cable.

2. To connect a broadband device (such as a cable modem):

a. Connect one end of an Ethernet cable to the WAN port on the SmartRG gateway and connect the other end of the

cable to the broadbandmodem.

b. Connect one end of the cable supplied by your provider to the broadband modem and connect the other end of the

cable to the wall jack installed by your provider.

3. Plug the power adapter to the wall outlet and then connect the other end of it to the Power port of the gateway.

4. Turn on the unit by pressing the Power button on the side of the gateway.

Your gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to complete before

you can begin using your Internet applications (browser, email, etc.).

If you are unable to connect to the Internet, verify that all cable connections are in place and the gateway’s power is turned on.

Logging in to the SR400ac Interface

To manually configure your SR400ac gateway, you must access the gateway's Web-based UI.

1. Configure your computer's IP interface to acquire an IP address automatically using DHCP.

2. Open a browser and enter the gateway's default address: http://192.168.1.1 in the address bar. The sign-in page

appears.

3. Enter the default username and password. For the administrator user, these are "admin" and "admin". For the support

user, these are "support" and the last three octets of the MAC address. Make sure to enter the letters in all caps and

include the separating colons (e.g., AA:BB:CC). The MAC address is located on a label on the back of the gateway.

Note: If you've forgotten your password, click Forgot Password and follow the instructions to reset your gateway to

the factory defaults. Then, enter the credentials provided with the gateway when you first received it.

4. Click LOGIN. The Status Dashboard page appears, showing data about your system.

At the top of each page are various options:

Next tothe logoisthe

button ( ). Click this button to show and hide the left navigation menu.

On the right is a

box which returns a list of pages that match your search term.

Next isthe

Language

dropdown( ) that you can use toselect your preferred interface language.

Next is the Dark Mode icon ( ) that turns the GUI to one with a black background. The icon changes to the Light

Mode icon ( ). Click it to return to the original (white background).

At the farrightisthe

Logout

button ( ).

At the bottom of each page is the WAN IP address and firmware version. Mouse over the labels to view the

information.

Saving Your Changes

When you change settings, the Pending Changes message appears at the bottom of the page, showing the number of changes waiting

to be applied. (The APPLY button is hidden until you change a setting.)

To view a list of your unsaved changes, click the message. The Unsaved Changes pop-up window appears.

To undo a change in the list, click the trashcan icon next to it. If you remove all of the changes from the change list, the Unsaved

Changes message disappears.

To apply unsaved changes (for any page), click APPLY on the current page.

Dashboard

When you log into the GUI, the following page appears. You can also reach this page by clicking Dashboard in the left menu.

On this page, you can view the IP address, route, number of connected devices, WAN and Wi-Fi traffic, device and system

information, system status, and memory statistics.

A list of top talkers appears below the Wi-Fi information. You can sort this list by any of the headings. The Minimum Rate field

appears at the top right of the Top Talkers frame. You can select a different transmission rate. Options are None, 0.01M, 0.1M, 1M,

10M, and 100M. The default is 0.01M.

Altri manuali per SmartRG SR400ac

Indice

Altri manuali ADTRAN Portale

ADTRAN

ADTRAN SMART/RG SR501 Manuale utente

ADTRAN

ADTRAN SMART/RG SR516ac Manuale utente

ADTRAN

ADTRAN Total Access 908e Manuale

ADTRAN

ADTRAN Pseudowire Gateway MX408e Manuale utente

ADTRAN

ADTRAN NetVanta 6355 Manuale del proprietario

ADTRAN

ADTRAN NetVanta 644 Manuale

ADTRAN

ADTRAN SmartRG SR400ac Manuale utente

ADTRAN

ADTRAN Total Access 900 Series Manuale

ADTRAN

ADTRAN 424RG ONT Manuale utente

ADTRAN

ADTRAN SmartRG SR400ac Manuale utente

ADTRAN

ADTRAN Total Access 916 Manuale

ADTRAN

ADTRAN 7310-8 Manuale utente

ADTRAN

ADTRAN Atlas 830 Manuale utente

ADTRAN

ADTRAN NetVanta 1355 Manuale utente

ADTRAN

ADTRAN SR820ac Manuale utente

ADTRAN

ADTRAN 825-v6 Manuale del proprietario

ADTRAN

ADTRAN NetVanta 6240 Series Manuale utente

ADTRAN

ADTRAN NETVANTA 640 Series Manuale utente

ADTRAN

ADTRAN Quintum Tenor AS Manuale utente

ADTRAN

ADTRAN 324RG Manuale utente

ADTRAN

ADTRAN SMART/RG SR501n Manuale utente

ADTRAN

ADTRAN SDX810-RG Manuale utente

ADTRAN

ADTRAN NetVanta 644 Manuale utente

ADTRAN

ADTRAN 6304W Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente