ADTRAN NetVanta Serial Dial Backup Interface Module (DIM)... Manuale utente

NetVanta Serial Dial Backup Interface Module (DIM) P/N 1200886L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

SPECIFICATIONS

Features 5-pin RS-232 interface via host RJ-45 DBU connector

Modem flow control support via CTS

Communication with external modem via AT commands

Compliance FCC Part 15 Class A, EN 55022 Class A, EN 55024

EN 61000-3-2, EN 61000-3-3

IEC 60950, EN 60950, UL/CUL 60950, AS/NZS 60950

Physical Dimensions: 2.3-inch W x 2.75-inch D

Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: Up to 95 percent, noncondensing

An RJ-45 to DB-9 adapter cable (P/N 1200887L1) is

required to connect to the external modem.

NetVanta modules should be installed only in

NetVanta Series products.

CONSOLE

LAN

SLOT 1 NET/D BU

WAN-DDS DBU

WAN-T1 DSX-1 DBU

SERIAL DBU CONNECTION PINOUTS

INSTALLATION INSTRUCTIONS

1. Remove power from the base unit.

2. If the Network Interface Module (NIM) is already in the NetVanta

chassis, release the pins at both edges of the NIM faceplate and slide

the module out of the chassis.

3. Carefully align the P1 connector on the NIM with the J1 connector on

the Serial DIM. Using only fingertip pressure so that neither circuit

board bends or flexes, ensure that the connectors are firmly seated.

Secure the Serial DIM to the NIM using the screws and standoff posts

supplied.

4. Slide the NIM with the Serial DIM attached into the NetVanta option

slot until the NIM is firmly seated against the chassis.

5. Secure the pins at both edges of the NIM.

6. Connect the cables to the associated device(s)

7. Complete installation of the base unit.

For NetVanta modules with outside plant

connections, ensure that all cables are

removed from the module before installing or

removing it from the NetVanta chassis.

Pin Name

1, 2 Unused

3CTS

4TXD

5RXD

6GND

7 DCD

8 Unused

Important: For additional details on product

features, specifications, installation, and safety, refer

to the appropriate Hardware Installation Guide on

the ADTRAN OS System Documentation CD

shipped with the base unit and available online at

www.adtran.com.

NetVanta Serial Dial Backup Interface Module (DIM) P/N 1200886L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

SERIAL DIM COMMANDS

alias <“text”>

Populates the ifAlias OID (Interface Table MIB of RFC2863) for all physical

and virtual interfaces when using SNMP management station.

caller-id override [always <number> | if-no-CID <number>]

Configures the unit to replace caller ID information with a user-specified

number. Use the no form of this command to disable any caller ID overrides.

always <number> Always forces replacement of the incoming

caller ID number with the number given.

if-no-CID <number> Replaces the incoming caller ID number with

the number given only if there is no caller ID

information available for the incoming call.

description <text>

Identifies the specified interface, both physical and virtual (for example,

circuit ID, contact information, etc.), using up to 80 alphanumeric characters.

dialin

Enables the modem for remote console dial-in, disabling the use of the

modem for dial-backup.

init-string <string>

Specifies an initialization string using standard AT commands. Use the no

form of this command to return to the default initialization string.

<string> Specifies an initialization string using standard

AT commands. This string must start with AT

and cannot contain spaces. The default string

is ate0q0v1x4\n0.

shutdown

Disables the interface (both physical and virtual) so that no data will be

passed through. Use the no version of this command to turn on the interface

and allow it to pass data.

Questo manuale è adatto per i seguenti modelli

Altri manuali ADTRAN Hardware di rete

ADTRAN

ADTRAN DSU IQ Manuale utente

ADTRAN

ADTRAN 4202023L1 Manuale utente

ADTRAN

ADTRAN DDS-DP Manuale del prodotto

ADTRAN

ADTRAN 1442470F1 Manuale utente

ADTRAN

ADTRAN T200 IDSL OCU-R Manuale di istruzioni

ADTRAN

ADTRAN BR1 Manuale utente

ADTRAN

ADTRAN 1442940G1 Manuale utente

ADTRAN

ADTRAN NetVanta 4660 Manuale utente

ADTRAN

ADTRAN DSU 56/64 Manuale utente

ADTRAN

ADTRAN NetVanta 6355 PoE Manuale utente

ADTRAN

ADTRAN Total Access 1248 Manuale utente

ADTRAN

ADTRAN 850-VoDSL Manuale utente

ADTRAN

ADTRAN NetVantaE1/FE1 Manuale utente

ADTRAN

ADTRAN ATLAS 800 Series Module QUAD E1 Manuale utente

ADTRAN

ADTRAN Dial Backup Interface Module 1204006L2 Manuale utente

ADTRAN

ADTRAN T200 HTU-R Manuale di istruzioni

ADTRAN

ADTRAN NetVanta 2000 Series Guida utente

ADTRAN

ADTRAN Total Access 900 Series Manuale utente

ADTRAN

ADTRAN 1203019L2 Manuale utente

ADTRAN

ADTRAN Total Access 300 Series Manuale utente

ADTRAN

ADTRAN 411 Manuale utente

ADTRAN

ADTRAN 424 ONT Manuale utente

ADTRAN

ADTRAN TRACER 5045 Guida utente

ADTRAN

ADTRAN jobAid 1442351G1 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente