ADTRAN TOTAL ACCESS 600R Manuale utente

TOTAL ACCESS 600R

User Interface Guide (UIG)

64200600L1#T-31A

April 2002

Total Access 600R User Interface Guide (UIG)

Trademarks

Any brand names and product names included in this manual are trademarks, registered trademarks, or trade

names of their respective holders.

To the Holder of the Manual

The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change

the contents without prior notice.

In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial

losses even if ADTRAN has been advised thereof as a result of issue of this publication.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

(256) 963-8000

Printed in U.S.A.

Total Access 600R User Interface Guide (UIG)

Safety Instructions

When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire,

electrical shock, or personal injury:

1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool.

2. Avoid using a telephone (other than a cordless-type) during an electrical storm.

There is a remote risk of shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord, power supply, and/or batteries indicated in the man-

ual. Do not dispose of batteries in a fire. They may explode. Check with local

codes for special disposal instructions.

Save These Important Safety Instructions

Notes provide additional useful information.

Caution signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the equipment or

endangerment to human life.

Total Access 600R User Interface Guide (UIG)

FCC regulations require that the following information be provided in this manual

to the customer:

1. This equipment complies with Part 68 of the FCC rules. On the side of the bot-

tom of this equipment is a label that contains, among other information, the

FCC Registration Number and Ringer Equivalence Number (REN), if applica-

ble, for this equipment. If required, this information must be given to the tele-

phone company.

2. An FCC-compliant telephone cord and modular plug is provided with this

equipment. This equipment is designed to be connected to the telephone net-

work or premises wiring using a compatible modular jack which is Part 68-

compliant. See installation instructions for details.

3. If your telephone equipment (Total Access 600R) causes harm to the telephone

network, the telephone company may discontinue your service temporarily. If

possible, they will notify you in advance. But if advance notice isn’t practical,

you will be notified as soon as possible. You will be advised of your right to

file a complaint with the FCC.

4. Your telephone company may make changes in its facilities, equipment, opera-

tions, or procedures that could affect the proper operation of your equipment. If

they do, you will be given advance notice to give you an opportunity to main-

tain uninterrupted service.

5. If you experience trouble with this equipment (Total Access 600R), please con-

tact ADTRAN for repair/warranty information. The telephone company may

ask you to disconnect this equipment from the network until the problem has

been corrected or until you are sure the equipment is not malfunctioning.

6. This unit contains no user-serviceable parts.

7. The FCC recommends that the AC outlet to which equipment requiring AC

power is to be installed is provided with an AC surge arrester.

8. The REN is used to determine the quantity of devices which may be connected

to the telephone line. Excessive RENs on the telephone line may result in the

devices not ringing in response to an incoming call. In most, but not all areas,

the sum of RENs should not exceed five (5.0). To be certain of the number of

devices that may be connected to a line, as determined by the total RENs, con-

tact the local telephone company.

9. The following information may be required when applying to your local tele-

phone company for leased line facilities.

Service Type REN/SOC FIC USOC

1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C

Total Access 600R User Interface Guide (UIG)

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio frequencies.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

Change or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

Total Access 600R User Interface Guide (UIG)

Industry Canada Compliance Information

Notice: The Industry Canada label applied to the product (identified by the Industry Canada logo or the

“IC:” in front of the certification/registration number) signifies that the Industry Canada technical

specifications were met.

Notice: The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the

documentation or on the product labeling/markings. The REN assigned to each terminal device indicates

the maximum number of terminals that can be connected to a telephone interface. The termination on an

interface may consist of any combination of devices subject only to the requirement that the sum of the

RENs of all the devices should not exceed five (5).

Canadian Emissions Requirements

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus

as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the

Department of Communications.

Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques

de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques,” NMB-003 edictee

par le ministre des Communications.

Total Access 600R User Interface Guide (UIG)

Affidavit Requirements for Connection to Digital Services

• An affidavit is required to be given to the telephone company whenever digital terminal

equipment without encoded analog content and billing protection is used to transmit digital

signals containing encoded analog content which are intended for eventual conversion into

voiceband analog signals and transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or billing information is being

transmitted or that the output of the device meets Part 68 encoded analog content or billing

protection specifications.

• End user/customer will be responsible for filing an affidavit with the local exchange carrier

when connecting unprotected customer premise equipment (CPE) to 1.544 Mbps or subrate

digital services.

• Until such time as subrate digital terminal equipment is registered for voice applications, the

affidavit requirement for subrate services is waived.

Total Access 600R User Interface Guide (UIG)

Affidavit for Connection of Customer Premises Equipment

to 1.544 Mbps and/or Subrate Digital Services

For the work to be performed in the certified territory of ___________________(telco name)

State of ________________

County of ________________

I, _______________________ (name), _____________________________(business address),

____________________ (telephone number) being duly sworn, state:

I have responsibility for the operation and maintenance of the terminal equipment to be

connected to 1.544 Mbps and/or ________ subrate digital services. The terminal equipment

to be connected complies with Part 68 of the FCC rules except for the encoded analog

content and billing protection specifications. With respect to encoded analog content and

billing protection:

( ) I attest that all operations associated with the establishment, maintenance, and adjustment of

the digital CPE with respect to analog content and encoded billing protection information con-

tinuously complies with Part 68 of the FCC Rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog content or billing

information which is intended to be decoded within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under the control of

the customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the establish-

ment, maintenance, and adjustment of the encoded analog content and billing information

has (have) been trained to perform these functions by successfully having completed one of

the following (check appropriate blocks):

( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode

analog signals; or

( ) B. A training course provided by the customer or authorized representative, using training

materials and instructions provided by the manufacturer/grantee of the equipment used to

encode analog signals; or

( ) C. An independent training course (e.g., trade school or technical institution) recognized by

the manufacturer/grantee of the equipment used to encode analog signals; or

( ) D. In lieu of the preceding training requirements, the operator(s)/maintainer(s) is (are) under

the control of a supervisor trained in accordance with _________ (circle one) above.

Total Access 600R User Interface Guide (UIG)

I agree to provide ______________________ (telco’s name) with proper documentation to

demonstrate compliance with the information as provided in the preceding paragraph, if so

requested.

_________________________________Signature

_________________________________Title

_________________________________ Date

Transcribed and sworn to before me

This ________ day of _______________, 20____

_________________________________

Notary Public

My commission expires:

_________________________________

Total Access 600R User Interface Guide (UIG)

Warranty and Customer Service

ADTRAN will repair and return this product within ten years from the date of shipment if it does not meet

its published specifications or fails while in service. For detailed warranty, repair, and return information

refer to the ADTRAN Equipment Warranty and Repair and Return Policy Procedure.

Return Material Authorization (RMA) is required prior to returning equipment to ADTRAN.

For service, RMA requests, or further information, contact one of the numbers listed at the end of this

section.

LIMITED PRODUCT WARRANTY

ADTRAN warrants that for ten years from the date of shipment to Customer, all products manufactured by

ADTRAN will be free from defects in materials and workmanship. ADTRAN also warrants that products

will conform to the applicable specifications and drawings for such products, as contained in the Product

Manual or in ADTRAN's internal specifications and drawings for such products (which may or may not be

reflected in the Product Manual). This warranty only applies if Customer gives ADTRAN written notice of

defects during the warranty period. Upon such notice, ADTRAN will, at its option, either repair or replace

the defective item. If ADTRAN is unable, in a reasonable time, to repair or replace any equipment to a

condition as warranted, Customer is entitled to a full refund of the purchase price upon return of the

equipment to ADTRAN. This warranty applies only to the original purchaser and is not transferable

without ADTRAN's express written permission. This warranty becomes null and void if Customer

modifies or alters the equipment in any way, other than as specifically authorized by ADTRAN.

EXCEPT FOR THE LIMITED WARRANTY DESCRIBED ABOVE, THE FOREGOING

CONSTITUTES THE SOLE AND EXCLUSIVE REMEDY OF THE CUSTOMER AND THE

EXCLUSIVE LIABILITY OF ADTRAN AND IS IN LIEU OF ANY AND ALL OTHER WARRANTIES

(EXPRESSED OR IMPLIED). ADTRAN SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES,

INCLUDING (WITHOUT LIMITATION), ALL WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION

OF IMPLIED WARRANTIES, SO THIS EXCLUSION MAY NOT APPLY TO CUSTOMER.

In no event will ADTRAN or its suppliers be liable to Customer for any incidental, special, punitive,

exemplary or consequential damages experienced by either Customer or a third party (including, but not

limited to, loss of data or information, loss of profits, or loss of use). ADTRAN is not liable for damages

for any cause whatsoever (whether based in contract, tort, or otherwise) in excess of the amount paid for

the item. Some states do not allow the limitation or exclusion of liability for incidental or consequential

damages, so the above limitation or exclusion may not apply to Customer.

Altri manuali per TOTAL ACCESS 600R

Indice

Altri manuali ADTRAN Hardware di rete

ADTRAN

ADTRAN 1700900F2 Manuale utente

ADTRAN

ADTRAN DSU IV ESP Manuale utente

ADTRAN

ADTRAN TSU ACE Manuale di servizio

ADTRAN

ADTRAN NxT1 HSSI/V-35 Manuale utente

ADTRAN

ADTRAN ATLAS 800 Series Module QUAD E1 Manuale utente

ADTRAN

ADTRAN 1442980G1C Manuale utente

ADTRAN

ADTRAN Total Access SHDSL LTU Manuale di istruzioni

ADTRAN

ADTRAN 1200630L1 Manuale utente

ADTRAN

ADTRAN T1 Nx64 HTU-R Manuale di istruzioni

ADTRAN

ADTRAN 6540 Manuale di istruzioni

ADTRAN

ADTRAN FXS+ Dual Manuale utente

ADTRAN

ADTRAN Total Access 1248 Manuale utente

ADTRAN

ADTRAN DE-4E Manuale di istruzioni

ADTRAN

ADTRAN SDX 621i XGS-PON ONT Manuale utente

ADTRAN

ADTRAN Total Access 300 Series Manuale del prodotto

ADTRAN

ADTRAN Total Access DSLAM Octal SHDSL Manuale utente

ADTRAN

ADTRAN HDSL4 Manuale di istruzioni

ADTRAN

ADTRAN Fractional T1 Tandem Channel Unit FT1-TDM Manuale utente

ADTRAN

ADTRAN ISU 512 Manuale utente

ADTRAN

ADTRAN Dial Backup Interface Module 1204006L2 Manuale utente

ADTRAN

ADTRAN NetVanta 6355 PoE Manuale utente

ADTRAN

ADTRAN NetVanta 818 Manuale utente

ADTRAN

ADTRAN 1203060L1 Manuale utente

ADTRAN

ADTRAN T400 Manuale di istruzioni

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente