ADTRAN NetVanta 1524 Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali ADTRAN Interruttore

ADTRAN

ADTRAN NetVanta 1560-08-150W Manuale utente

ADTRAN

ADTRAN NetVanta 1560-48 Manuale utente

ADTRAN

ADTRAN DDM+ H2TU-C Manuale utente

ADTRAN

ADTRAN NetVanta 1224 Manuale utente

ADTRAN

ADTRAN 1702594G1 NetVanta 1234 Manuale

ADTRAN

ADTRAN NetVanta 1524ST Manuale utente

ADTRAN

ADTRAN NetVanta 1570-24-370W Manuale utente

ADTRAN

ADTRAN D4 TRDDB Manuale utente

ADTRAN

ADTRAN D4 OCU DP (ETR) D4-OCU Manuale di istruzioni

ADTRAN

ADTRAN TRDDS-R Manuale di istruzioni

ADTRAN

ADTRAN D4 U-BR1TE V Manuale del prodotto

ADTRAN

ADTRAN NetVanta 1560-24-370W Manuale utente

ADTRAN

ADTRAN NetVanta Series Manuale utente

ADTRAN

ADTRAN ATLAS 890 Manuale utente

ADTRAN

ADTRAN OC-3c/STM 1 Manuale utente

ADTRAN

ADTRAN ATLAS 550 Manuale utente

ADTRAN

ADTRAN NetVanta 1224R Istruzioni per l'installazione

ADTRAN

ADTRAN NetVanta 1335 Series Manuale utente

ADTRAN

ADTRAN NETVANTA 1224 POWER OVER ETHERNET Series Manuale utente

ADTRAN

ADTRAN DSU III S2W Manuale utente

ADTRAN

ADTRAN NetVanta 1224STR PWR Manuale utente

ADTRAN

ADTRAN NetVanta 1224STR PWR Manuale utente

ADTRAN

ADTRAN NetVanta 1638 Manuale

ADTRAN

ADTRAN FT1 DP Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Installing the NetVanta 1524 Series Switch P/N 1200560L1

Quick Start Guide

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ©2004 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at www.adtran.com

1GETTING STARTED —ACCESSING THE GUI 4. The initial GUI screen appears.

Two configuration methods are available for your NetVanta Switch:

• Web-Based GUI (discussed in this section)

• AOS CLI (discussed on page 2)

You may access the web-based GUI from any web browser on your network by

following these steps:

1. Connect the switch to your PC using the ETH 0/0 port on the back of the

unit.

2. Set your PC to obtain an IP address automatically (or if using a fixed IP

address, set your PC to 10.10.20.2).

3. Enter the unit’s IP address in your browser address line (see example,

below). The default IP address is 10.10.20.1.

4. You will then be prompted for the username and password (the default

settings are admin and password).

Installing the NetVanta 1524 Series Switch P/N 1200560L1

Quick Start Guide

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ©2004 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at www.adtran.com

For more details on CLI access, refer to the AOS Command

Reference Guide on your ADTRAN OS System

Documentation CD (included in shipment).

2ACCESSING THE CLI

The web-based GUI lets you configure the main switch settings and provides

online guidance and explanations for each setting. However, using the AOS

command line interface (CLI) may be necessary for more advanced

configurations. Access the AOS CLI via the CONSOLE port or a Telnet session.

To establish a connection to the NetVanta 1524 Switch CONSOLE port, you

need the following items:

• VT100 terminal or PC (with VT100 terminal emulation software)

• Straight-through serial cable with a DB-9 (male) connector on one end and

the appropriate interface for your terminal or PC communication port on the

other end

1. Connect the DB-9 (male) connector of your serial cable to the CONSOLE

port on the rear panel of the switch.

2. Connect the other end of the serial cable to the terminal or PC.

3. Insert the connector of the provided power cord into the power interface on

the rear panel of the unit, and plug the cord into a standard electrical outlet.

4. Once the switch has powered up, open a VT100 terminal session using the

following settings: 9600 baud, 8 data bits, no parity bits, and 1 stop bit.

Press <Enter> to activate the ADTRAN operating system command line

interface (AOS CLI).