Advantech MIC-730AI Manuale utente

User Manual

MIC-730AI

AI Inference System based on

NVIDIA®AGX Jetson Xavier™

AI 推理系统，搭配 NVIDIA® AGX

Jetson Xavier™

AI 推理系統，搭配 NVIDIA® AGX

Jetson Xavier™

MIC-730AI User Manual/用户手册 ii

The documentation and the software included with this product are copyrighted 2021

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. The information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of the rights of third parties that may result from its use.

中相关产品的说明，研华公司保留随时变更的权利，恕不另行通知。未经研华公司书

面许可，本手册所有内容不得通过任何途径以任何形式复制、翻印、翻译或者传输。

本手册以提供正确、可靠的信息为出发点。但是研华公司对于本手册的使用结果，或

者因使用本手册而导致其它协力厂商的权益受损，概不负责。

相關產品的說明，研華公司保留隨時變更的權利，恕不另行通知。未經研華公司書面

許可，本手冊所有內容不得通過任何途徑以任何形式複製、翻印、翻譯或者傳輸。本

手冊以提供正確、可靠的資訊為出發點。但是研華公司對於本手冊的使用結果，或者

因使用本手冊而導致其他協力廠商的權益受損，概不負責。

Acknowledgments/ 认可声明 / 認可聲明

NVIDIA is a trademark of the NVIDIA Corporation.

All other product names or trademarks are properties of their respective owners.

NVIDIA 为 NVIDIA Corporation 的商标。

所有其他产品名或商标均为各自所属方的财产。

NVIDIA 為 NVIDIA Corporation 的商標。

所有其他產品名或商標均為各自所屬方的財產。

申請商：研華股份有限公司

地址：台北市內湖區瑞光路 26 巷 20 弄 1 號

電話：02-27977818

Part No./ 料号 /料號：2001C73020 Edition 1

Printed in Taiwan November 2021

iii MIC-730AI User Manual/用户手册

Product Warranty (2 years)/ 产品质量保证（两年）/ 產

品品質保證（兩年）

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or products that have

been subject to misuse, abuse, accident, or improper installation. Advantech

assumes no liability under the terms of this warranty as a consequence of such

events.

Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers will be billed according to the cost of replacement mate-

rials, service time, and freight. Please consult your dealer for more details.

If you believe your product to be defective, follow the steps outlined below.

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages displayed when the prob-

lem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain a return merchandise authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a completed Repair and Replacement

Order Card, and a proof of purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur-

chase date are not eligible for warranty service.

5. Write the RMA number clearly on the outside of the package and ship the pack-

age prepaid to your dealer.

从购买之日起，研华为原购买商提供两年的产品质量保证。但对那些未经授权的维修

人员维修过的产品并不进行质量保证。研华对于不正确的使用、灾难、错误安装产生

的问题有免责权利。

如果研华产品出现故障，在质保期内我们提供免费维修或更换服务。对于出保产品，

我们将会酌情收取材料费、人工服务费用。请联系您的销售人员了解详细情况。

如果您认为您购买的产品出现了故障，请遵循以下步骤：

1. 收集您所遇到的问题的信息（例如，CPU 主频、使用的研华产品及其它软件、

硬件等）。请注意屏幕上出现的任何不正常信息显示。

2. 打电话给您的供货商，描述故障问题。请借助手册，产品和任何有帮助的信息。

3. 如果您的产品被诊断发生故障，请从您的供货商那里获得 RMA (Return Mate-

rial Authorization) 序列号。这可以让我们尽快的进行故障产品的回收。

4. 请仔细的包装故障产品，并在包装中附上完整的售后服务卡片和购买日期证明

（如销售发票）。我们对无法提供购买日期证明的产品不提供质量保证服务。

5. 把相关的 RMA 序列号写在外包装上，并将其运送给销售人员。

MIC-730AI User Manual/用户手册 iv

從購買之日起，研華為原購買商提供兩年的產品品質保證。但對那些未經授權的維修

人員維修過的產品並不進行品質保證。研華對於不正確的使用、災難、錯誤安裝產生

的問題有免責權利。

如果研華產品出現故障，在保固期內我們提供免費維修或更換服務。對於保固外產品，

我們將會酌收材料費、人工服務費用。請聯繫您的銷售人員瞭解詳細情況。

如果您認為您購買的產品出現了故障，請遵循以下步驟：

1. 收集您所遇到的問題的資訊（例如，CPU 頻率、使用的研華產品及其它軟體、

硬體等）。請注意螢幕上出現的任何不正常資訊顯示。

2. 打電話給您的供應商，描述故障問題。請參考手冊，產品和任何有幫助的資訊。

3. 如果您的產品被診斷發生故障，請從您的供應商那裏獲得 RMA (Return Mate-

rial Authorization) 序號。這可以讓我們儘快的進行故障產品的回收。

4. 請仔細的包裝故障產品，並在包裝中附上完整的售後服務卡片和購買日期證明

（如銷售發票）。我們對無法提供購買日期證明的產品不提供保固服務。

5. 把相關的 RMA 序號寫在外包裝上，並將其運送給銷售人員。

Declaration of Conformity/ 符合性声明 / 符合性聲明

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A dig-

ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference. In

this event, users are required to correct the interference at their own expense.

FCC A 级

注意：根据 FCC 规则第 15 款，本设备已经过检测并被判定符合 A 级数字设备标准。

这些限制旨在为商业环境下的系统操作提供合理保护，使其免受有害干扰。本设备会

产生、耗费和发射无线电频率能量，如果没有按照手册说明正确安装和使用，可能会

对无线电通讯造成有害干扰。此时，用户需自行解决干扰问题。

FCC A 级

注意：根據 FCC 規則第 15 款，本設備已經過檢測並被判定符合 A 級數位設備標準。

這些限制旨在為商業環境下的系統操作提供合理保護，使其免受有害干擾。本設備會

產生、耗費和發射無線電頻率能量，如果沒有按照手冊說明正確安裝和使用，可能會

對無線電通訊造成有害干擾。此時，用戶需自行解決干擾問題。

v MIC-730AI User Manual/用户手册

Packing List/ 包装清单 / 包裝清單

Before system installation, check that the items listed below are included and in good

condition. If any item does not accord with the list, contact your dealer immediately.

1 x MIC-730AI

1 x Power terminal block (4P)

2 x DI/DO terminal block (10P)

2 x mounting bracket

1 x China ROHS

1 x User manual (online download)

1 x SATA Cable

1 x SATA Power Cable

1 x Micro USB cable for system recovery

4 x 2.5 HDD Rubber

2 x MiniPCIe screw + 1 x M.2 screw

安装之前，用户需确认包装中含有下面所列各项。如果有任何项目与列表不符，请立

即联系您的经销商。

1 x MIC-730AI

1 x 电源接头 (4P)

2 x DI/DO 接头 (10P)

2 x 支架

1 x 中国 ROHS 檔

1 x 手册（在线下载）

1 x SATA 线材

1 x SATA 电源线

1 x Micro USB 线材 (system recovery)

4 x 2.5 硬盘避震垫

2 x MiniPCIe 螺丝 + 1 x M.2 螺丝

安裝之前，用戶需確認包裝中含有下面所列各項。如果有任何專案與列表不符，請立

即聯繫您的經銷商。

1 x MIC-730AI

1 x 電源接頭 (4P)

2 x DI/DO 接頭 (10P)

2 x 支架

1 x 中國 ROHS 檔

1 x 手冊 ( 線上下載 )

1 x SATA 線材

1 x SATA 電源線

1 x Micro USB 線材 (system recovery)

4 x 2.5 硬碟避震墊

2 x MiniPCIe 螺絲 + 1 x M.2 螺絲

MIC-730AI User Manual/用户手册 vi

Product Information/ 产品信息 /產品資訊

For more information on this and other Advantech products, please visit our website

at:

http://www.advantech.com

For technical support and service, please visit our support website for MIC-730AI at:

https://advt.ch/mic-730ai

http://www.register.advantech.com

如需本产品或研华其它产品的更多信息，请访问我们的网站：

http://www.advantech.com

如需技术支持与服务，请访问 MIC-730AI 的技术支持网站：

https://advt.ch/mic-730ai

请在网站上注册您的产品并免费获取 2 个月的延长质保：

http://www.register.advantech.com

如需本產品或研華其它產品的更多資訊，請訪問我們的網站：

http://www.advantech.com

如需技術支援與服務，請訪問 MIC-730AI 的技術支援網站：

https://advt.ch/mic-730ai

請在網站上註冊您的產品並免費獲取得 2 個月的延長保固：

http://www.register.advantech.com

vii MIC-730AI User Manual/用户手册

Safety Instructions/ 安全指示

1. Read these safety instructions carefully.

2. Retain this user manual for future reference.

3. Disconnect the equipment from all power outlets before cleaning. Use only a

damp cloth for cleaning. Do not use liquid or spray detergents.

4. For pluggable equipment, the power outlet socket must be located near the

equipment and easily accessible.

5. Protect the equipment from humidity.

6. Place the equipment on a reliable surface during installation. Dropping or letting

the equipment fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. Do not cover the openings.

8. Ensure that the voltage of the power source is correct before connecting the

equipment to a power outlet.

9. Position the power cord away from high-traffic areas. Do not place anything over

the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage from transient overvoltage.

12. Never pour liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If any of the following occurs, have the equipment checked by service person-

nel:

–The power cord or plug is damaged.

–Liquid has penetrated the equipment.

–The equipment has been exposed to moisture.

–The equipment is malfunctioning, or does not operate according to the user

manual.

–The equipment has been dropped and damaged.

–The equipment shows obvious signs of breakage.

DISCLAIMER: These instructions are provided according to IEC 704-1 standards.

Advantech disclaims all responsibility for the accuracy of any statements contained

herein.

1. 请仔细阅读此安全操作说明。

2. 请妥善保存此用户手册供日后参考。

3. 用湿抹布清洗设备前，请从插座拔下电源线。请不要使用液体或去污喷雾剂清洗

设备。

4. 对于使用电源线的设备，设备周围必须有容易接触到的电源插座。

5. 请不要在潮湿环境中使用设备。

6. 请在安装前确保设备放置在可靠的平面上，意外跌落可能会导致设备损坏。

7. 设备外壳的开口是用于空气对流，从而防止设备过热。请不要覆盖这些开口。

8. 当您连接设备到电源插座上前，请确认电源插座的电压是否符合要求。

9. 请将电源线布置在人们不易绊到的位置，并不要在电源线上覆盖任何杂物。

10. 请注意设备上的所有警告标识。

11. 如果长时间不使用设备，请将其同电源插座断开，避免设备被超标的电压波动损

坏。

12. 请不要让任何液体流入通风口，以免引起火灾或者短路。

MIC-730AI User Manual/用户手册 viii

13. 请不要自行打开设备。为了确保您的安全，请由经过认证的工程师来打开设备。

14. 如遇下列情况，请由专业人员来维修：

电源线或者插头损坏；

设备内部有液体流入；

设备曾暴露在过于潮湿的环境中使用；

设备无法正常工作，或您无法通过用户手册来使其正常工作；

设备跌落或者损坏；

设备有明显的外观破损。

免责声明：该安全指示符合 IEC 704-1 的要求。研华公司对其内容的准确性不承担任

何法律责任。

1. 請仔細閱讀此安全操作說明。

2. 請妥善保存此用戶手冊供日後參考。

3. 用濕抹布清洗設備前，請從插座拔下電源線。請不要使用液體或去污噴霧劑清洗

設備。

4. 對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。

5. 請不要在潮濕環境中使用設備。

6. 請在安裝前確保設備放置在可靠的平面上，意外跌落可能會導致設備損壞。

7. 設備外殼的開口是用於空氣對流，從而防止設備過熱。請不要覆蓋這些開口。

8. 當您連接設備到電源插座上前，請確認電源插座的電壓是否符合要求。

9. 請將電源線佈置在人們不易絆到的位置，並不要在電源線上覆蓋任何雜物。

10. 請注意設備上的所有警告標識。

11. 如果長時間不使用設備，請將其同電源插座斷開，避免設備被超標的電壓波動損

壞。

12. 請不要讓任何液體流入通風口，以免引起火災或者短路。

13. 請不要自行打開設備。為了確保您的安全，請由經過認證的工程師來打開設備。

14. 如遇下列情況，請由專業人員來維修：

 電源線或者插頭損壞；

 設備內部有液體流入；

 設備曾暴露在過於潮濕的環境中使用；

 設備無法正常工作，或您無法通過用戶手冊來使其正常工作；

 設備跌落或者損壞；

 設備有明顯的外觀破損。

免責聲明：該安全指示符合 IEC 704-1 的要求。研華公司對其內容的準確性不承擔任

何法律責任。

警告使用者：這是甲類資料產品，在居住的環境中使用時，可能會造成射頻干擾，在

這種情況下，使用者會被要求採取某些適當的對策。

電腦配置了由電池供電的即時時鐘電路，如果電池更換不正確，將有爆炸的危險，因

此只可以使用製造商推薦的同一種或者同等型號的電池進行替換。請按照製造商的指

示處理舊電池。

ix MIC-730AI User Manual/用户手册

Safety Instructions/安全指示/安全指示

Caution: Ensure that the voltage of the power source is correct before connecting

the equipment to a power outlet. The power outlet socket should have grounded con-

nection.

Attention: Assurez-vous que la tension de la source d'alimentation est correcte

avant de connecter l'équipement à une prise de courant. La prise de courant doit

avoir une connexion à la terre.

Caution: danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer, discard used batteries

according to the manufacturer's instructions.

Attention: danger d'explosion si la batterie est inexactement remplacée. Remplacez

seulement avec la même chose ou le type équivalent recommandé par le fabricant,

jettent les batteries utilisées instructions de s selon fabricant des'

This product is intended to be supplied by an UL certified power supply or dc source

suitable for use at minimum Tma 50 degree° C whose output meets SELV or ES1

and is rated 9-36Vdc, 11-3A min., if need further assistance, please contact Advant-

ech for further information.

The equipment is not suitable for use in locations where children are likely to be pres-

ent.

The earthing wire of the protective earthing conductor shall be green-and-yellow, 14

AWG.

MIC-730AI User Manual/用户手册 x

Safety Precaution – Static Electricity/安全措施 - 静电

防护/安全措施 - 靜電防護

Follow these simple precautions to protect yourself from harm and the products from

damage:

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

Disconnect the power before making any configuration changes. A sudden rush

of power after connecting a jumper or installing a card may damage sensitive

electronic components.

为了保护您和您的设备免受伤害或损坏。请遵照以下安全措施：

操作设备之前，请务必断开机箱电源，以防触电。不可在电源接通时接触 CPU

板或其它板上的任何组件。

在更改任何配置之前请断开电源，以免在您连接跳线或安装卡时，瞬间电涌损坏

敏感电子元件。

為了保護您和您的設備免受傷害或損壞，請遵照以下安全措施：

操作設備之前，請務必斷開主機殼電源，以防觸電。不可在電源接通時接觸 CPU

卡或其它卡上的任何元件。

在更改任何配置之前請切斷電源，以免在您連接跳線或安裝卡時，瞬間電湧損

壞敏感電子元件。

Indice

Altri manuali Advantech Hardware per computer

Advantech

Advantech PCM-3864 Manuale di installazione e funzionamento

Advantech

Advantech ITA-2230 Series Manuale di installazione e funzionamento

Advantech

Advantech EPC-R6410 Manuale utente

Advantech

Advantech AIMB-706 Manuale di installazione e funzionamento

Advantech

Advantech SOM-2532 Series Manuale utente

Advantech

Advantech PCA-6185 Manuale utente

Advantech

Advantech PCA-6742 Series Manuale utente

Advantech

Advantech Watchdog Timer UNO-2171 Manuale utente

Advantech

Advantech PCE-7131 Manuale di installazione e funzionamento

Advantech

Advantech UNO-238 V2 Manuale utente

Advantech

Advantech PCL-740 Manuale utente

Advantech

Advantech PCL-725 Manuale utente

Advantech

Advantech EPC-T4286 Series Manuale utente

Advantech

Advantech PCM-4380 Manuale di installazione e funzionamento

Advantech

Advantech ROM-5420 Manuale utente

Advantech

Advantech UNO-1251G Manuale utente

Advantech

Advantech RSB-4221 Manuale utente

Advantech

Advantech ASMB-831 Series Manuale utente

Advantech

Advantech PPC-1150 Manuale utente

Advantech

Advantech PCIe-1674 Manuale utente

Advantech

Advantech PCIE-1203 Manuale utente

Advantech

Advantech AiMC-2000 Manuale utente

Advantech

Advantech PCA-6654 Manuale utente

Advantech

Advantech PCL-848A/B Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente