Advantech Wizard BB-WSK-REF-2 Manuale utente
Wzzard™ Mesh Gen2 Starter Bundles
Refrigeration Monitoring Kit
Model BB-WSK-REF-2
SETUP MANUAL
REFRIGERATION MONITORING KIT
2
Advantech - Americas
707 Dayton Road
Ottawa, IL 61350 USA
Phone:1 (815) 433-5100
Fax:1 (815) 433-5105
Advantech - European Headquarters
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone:+353 91-792444
Fax: +353 91-792445
www.advantech.com
support@advantech-bb.com
Documentation Number: pn2003BREF00_r1_BB-WSK-REF-2_1319m
REFRIGERATION MONITORING KIT
3
CONTENTS
REFRIGERATION MONITORING STARTER KIT.................................................................................................4
WZZARD MESH NETWORK SETUP......................................................................................................................4
DOWNLOADING REFRIGERATION MONITOR Node-RED™ FLOW TO THE GATEWAY..........................5
POINT THE MQTT DATA TO THE INTERNAL MQTT BROKER .....................................................................12
WAKE UP WZZARD™ MESH EDGE NODE .......................................................................................................14
ACCESS Node-RED™ UI IN THE GATEWAY ....................................................................................................15
NETWORK HEALTH PAGE....................................................................................................................................16
ATTACHING THE SENSORS ON THE INTELLIGENT EDGE NODES ..........................................................17
MOUNTING YOUR SENSORS ..............................................................................................................................18
ACCESSING THE DASHBOARD ..........................................................................................................................19
SETTING UP AN E-MAIL ACCOUNT ...................................................................................................................20
SETTING UP YOUR DROPBOX FOR LOGGING...............................................................................................22
APPENDIX A. CARRIER TEXT MESSAGING URL ADDRESSES ..................................................................25
Node-RED™ SOFTWARE LICENSE ....................................................................................................................27
ADVANTECH TECHNICAL SUPPORT.................................................................................................................28
REFRIGERATION MONITORING KIT
4
REFRIGERATION MONITORING STARTER KIT
Kit Model BB-WSK-REF-2
The Wzzard™ Mesh Refrigeration Monitoring Application Kit provides a non-intrusive, easily
installed solution for monitoring internal and external temperature, door open/closed and current
draw on refrigeration equipment without disrupting your existing facility operations. Email or text
message alerts can be sent when user-configured high or low limits are exceeded in critical
applications.
Installation costs are kept low using the Wzzard Mesh Wireless Sensing platform. The platform
creates a self-forming, self-healing wireless mesh network that eliminates the need for wires
and requires no special skills to install. Each Wzzard sensor node is powered by long life
batteries.
Using Node-RED™, a simple, browser based application pre-installed on the gateway, you can
monitor your cooler or freezer performance from any web browser on your network.
The contents of the kit include:
Qty 1 BB-WCD1H2102H Commercial Temperature/Humidity Wzzard Mesh Node
Qty 2 BB-JC10F50-V 50A Clamp-on Current Sensor
Qty 1 BB-WCHCBL Thermistor/Breakout Cable
Qty 1 BB-WCHMS Door Sensor Cable
Qty 1 SmartSwarm 342™ Ethernet Wzzard Mesh Gateway
WZZARD MESH NETWORK SETUP
The Wzzard Mesh Node and Gateway in this kit are preconfigured. If this is the only Wzzard
Mesh device in your vicinity, it will need no further configuration. If other Wzzard Mesh gateways
or nodes are nearby and unclaimed, you will need to claim the gateway and the node. See
respective node and gateway manuals for instructions.
REFRIGERATION MONITORING KIT
5
DOWNLOADING REFRIGERATION MONITOR NODE-RED™ FLOW TO THE
GATEWAY
NOTE: The gateway must be in operational and online state in order to add the HVAC
application (ie Eth1 must be plugged in).
1. Follow the instructions in the Gateway’s Quick Start Guide to claim your gateway.
2. Select View Devices from the dropdown menu on the SmartWorx™ Hub home screen:
3. Select your device from the list of available devices:
REFRIGERATION MONITORING KIT
6
4. Select Add/Upgrade Apps tab.
REFRIGERATION MONITORING KIT
7
5. Check the box next to REF. A list of components to be updated will appear.
REFRIGERATION MONITORING KIT
8
6. Click OK to accept the download.
REFRIGERATION MONITORING KIT
9
7. Click Add/Upgrade Selected to start the download.
REFRIGERATION MONITORING KIT
10
8. The download could take several minutes. To monitor the progress, select History from the
Manage Device screen.
Indice
