Advantech PCIE-1760 Manuale utente
User Manual
PCIE-1760
8-Ch Relay and 8-Ch Isolated
Digital Input PCIE Card
PCIE-1760 User Manual ii
Copyright
The documentation and software included with this product are copyrighted 2023 to
Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to
make improvements on the products described herein at any time without notice. No
part of this manual may be reproduced, copied, translated, or transmitted in any form
or by any means without prior written permission from Advantech Co., Ltd. The infor-
mation provided in this manual is intended to be accurate and reliable. However,
Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringement of
the rights of third parties, which may result from its use.
Acknowledgments
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names and trademarks are the property of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that this product will be free from
defects in materials and workmanship for 2 years from the date of purchase.
This warranty does not apply to products that have been repaired or altered by per-
sons other than repair personnel authorized by Advantech, nor does it apply to prod-
ucts that have been subject to misuse, abuse, accident, or improper installation.
Under the terms of this warranty, Advantech assumes no liability for consequences
arising from such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more details.
If you believe that you have a defective product, follow these steps:
1. Collect all the information about the problem encountered (e.g., CPU speed,
Advantech products used, other hardware and software used, etc.). Note any-
thing abnormal and list any on-screen messages that appear when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully completed Repair and Replacement
Order Card, and proof of purchase date (e.g., a photocopy of your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship it prepaid
to your dealer.
Part No. 2003E76012 Edition 3
Printed in Taiwan May 2023
iii PCIE-1760 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend using shielded cables. This type
of cable is available from Advantech. Please contact your local supplier for ordering
information.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the user manual,
may cause harmful interference to radio communications. Operation of this equip-
ment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his or her own expense.
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support for the latest infor-
mation about this product.
2. Should you require additional assistance, contact your distributor, sales repre-
sentative, or Advantech's customer service center for technical support. Please
have the following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (OS, version, application software, etc.)
–A complete description of the problem
–The exact wording of any error messages
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
PCIe bus main communication interface board
Startup Manual
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.
PCIE-1760 User Manual iv
v PCIE-1760 User Manual
Contents
Chapter 1 Introduction..........................................1
1.1 Product Overview...................................................................................... 2
Figure 1.1 PCIE-1760 .................................................................. 2
1.2 Product Features....................................................................................... 2
1.2.1 Board ID........................................................................................ 2
1.3 Driver Installation ...................................................................................... 3
Figure 1.2 XNavi Installer ............................................................ 3
1.4 Software Utility .......................................................................................... 3
1.5 Software Development Using DAQNavi SDK ........................................... 4
1.6 FPGA Code Update .................................................................................. 4
1.7 Hardware Installation ................................................................................ 4
Figure 1.3 Device Manager ......................................................... 5
1.8 Accessories............................................................................................... 5
Chapter 2 Installation and Field Applications ....7
2.1 Signal Connection and Pin Assignments .................................................. 8
2.1.1 Isolated Digital Input Signal Connection ....................................... 8
Figure 2.1 Digital input signal connection with wet contact config-
uration......................................................................... 8
Figure 2.2 Digital input signal connection with dry contact configu-
ration........................................................................... 9
2.1.2 Relay Output Signal Connection................................................... 9
Figure 2.3 Relay output signal connection................................. 10
Figure 2.4 Digital input signal connection with dry contact configu-
ration......................................................................... 10
2.1.3 Counter Signal Connection ......................................................... 11
Figure 2.5 TTL type counter output signal connection............... 11
Figure 2.6 Sink type counter output signal connection .............. 12
2.1.4 Pin Assignment ........................................................................... 12
Figure 2.7 Pin assignment of PCIE-1760 .................................. 12
2.1.5 Switch and Jumper Settings ....................................................... 13
Chapter 3 Function Details.................................17
3.1 Digital Input ............................................................................................. 18
3.1.1 Digital Input Interrupt................................................................... 18
Figure 3.1 Digital input rising edge interrupts ............................ 18
Figure 3.2 Digital input falling edge interrupts ........................... 18
Figure 3.3 Digital input both edges interrupts ............................ 18
3.1.2 Digital Input Pattern Match Interrupt ........................................... 18
Figure 3.4 Digital input pattern match interrupt for pattern
“10xx0100”................................................................ 19
3.1.3 Digital Input Debounce Filter....................................................... 19
Figure 3.5 Digital input debounce filter ...................................... 19
3.1.4 Instant Digital Input Acquisition................................................... 19
Figure 3.6 Instant digital input acquisition.................................. 19
3.2 Digital Output .......................................................................................... 20
3.2.1 Static Digital Output Update........................................................ 20
Figure 3.7 Static digital output update ....................................... 20
3.3 Counter Output........................................................................................ 20
3.3.1 Event Counting ........................................................................... 20
Figure 3.8 Rising edge event counting ...................................... 20
PCIE-1760 User Manual vi
Figure 3.9 Falling edge event counting ..................................... 20
Figure 3.10Event counting with pause gate ............................... 21
3.3.2 Pulse Width Measurement.......................................................... 21
Figure 3.11Pulse width measurement ........................................ 21
3.4 Device Description and Configuration..................................................... 21
Figure 3.12Device description shown in Navigator .................... 22
Appendix A Specifications.................................... 23
A.1 Isolation Digital Input............................................................................... 24
A.2 Relay Output ........................................................................................... 24
A.3 Counter ................................................................................................... 25
A.4 General ................................................................................................... 26
A.5 Function Block Diagram.......................................................................... 27
Chapter 1
1Introduction
PCIE-1760 User Manual 2
1.1 Product Overview
This chapter provides an overview of Advantech industrial data acquisition module
for PCIE-1760 — surveying the product lineups, features, drivers, utilities, and acces-
sories. PCIE-1760 are differential digital I/O modules. The function for these models
are isolated digital I/O, TTL I/O, solid-state relay (SSR), and counters.
All of the PCIe modules are capable of use in all kinds of PCIe chassis. Detailed
instructions and functions will be described in the following sections.
Figure 1.1 PCIE-1760
1.2 Product Features
1.2.1 Board ID
A board ID can be assigned to the PCIe chassis by the rotary switch and slot number.
The board ID will be shown in the software and can be used to distinguish modules.
The number shown around the rotary switch shows if the device is in operation or
not. For example, When configured as 0, the board ID is automatically assigned by
the device driver software. When configured as a value other than 0, the configured
value is used. Do not configure the same value (except for 0) for hardware devices
with the same model name. Refer to the device specifications for the configuration of
the board ID.
If changed, a new board ID value takes effect only after a cold reset. The number
assigned to each PCIe module follows a rule combining the ChassisID and slot num-
ber. Refer to section 3.4 for more detailed information.
3 PCIE-1760 User Manual
Chapter 1 Introduction
1.3 Driver Installation
The driver package can be found via the Advantech Support Portal (https://
www.advantech.com/support). Search for PCIe on the support portal to find the cor-
responding driver/SDK package. You’ll receive the XNavi installer after the download
session finishes.
Execute the installer and it will guide you through the session. You can choose the
device and software components you’d like to install in the system (Figure 1.2). After
the selection, click on “start” to begin the installation.
Figure 1.2 XNavi Installer
1.4 Software Utility
Advantech offers device drivers, SDKs, third-party driver support, and application
software to help you fully exploit the functions of your PCIe system. All these soft-
ware packages are available on the Advantech website: http://www.advantech.com/.
The Advantech Navigator is a utility that allows you to set up, configure, and test your
device; and later stores your settings in a proprietary database.
1. To set up the I/O device for your card, you should first run the Advantech Navi-
gator program (by accessing Start/Programs/Advantech Automation/XNavi
Advantech Navigator). The settings can also be saved.
2. You can then view the device(s) already installed on your system (if any) on the
Installed Device tree view. If the software and hardware installation have com-
pleted, you will see the PCIe modules in the Installed Devices list.
PCIE-1760 User Manual 4
1.5 Software Development Using DAQNavi SDK
DAQNavi SDK is the software development kit for programming applications with
Advantech DAQ products. The necessary runtime DLL, header files, software man-
ual and tutorial videos can be installed via XNavi installer, which can be found under
C:\Advantech\DAQNavi (default directory) after finishing installation.
1.6 FPGA Code Update
The FPGA can also be updated via the interface in Navigator. However, it isn’t normal
to make an FPGA update. Advantech strongly suggests consultation with technical
support before starting an FPGA update.
1.7 Hardware Installation
After the device driver installation has completed, you can now continue to install the
PCIE-1760 card in any PCI Express slot on your computer. Follow the steps below to
install the card on your system.
1. Turn off your computer and unplug the power cord and cables. TURN OFF your
computer before installing or removing any components on the computer.
2. Remove the cover of your computer.
3. Remove the slot cover on the back panel of your computer.
4. Touch the metal part on the surface of your computer to neutralize the static
electricity that might be on your body.
5. Insert the PCIE-1760 card into a PCI Express slot. Hold the card only by its
edges and carefully align it with the slot. Insert the card firmly into place. Use of
excessive force must be avoided, otherwise the card might get damaged.
6. Fasten the bracket of the PCI Express card on the back panel of the computer.
7. Connect appropriate accessories to the PCI Express card.
8. Replace the cover of your computer chassis. Re-connect the cables you
removed in step 1.
9. Plug in the power cord and turn on the computer.
After the PCIE-1760 card is installed, you can verify whether it is properly installed on
your system through the Device Manager:
1. Access the Device Manager through Control Panel/System/Device Manager.
2. The device name of the PCIE-1760 should be listed on the Device Manager tab
as follows.
Altri manuali per PCIE-1760
1
Indice
