Advantech PCA-6175 Manuale utente

PCA-6175

Pentium®II processor-based

PCI/ISA-bus CPU card

This document is copyrighted, 1998, by Advantech Co., Ltd. All

rights are reserved. Advantech Co., Ltd. reserves the right to make

improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this

manual is intended to be accurate and reliable. However, Advantech

Co., Ltd. assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

Acknowledgements

AWARD is a trademark of AWARD Software, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

IBM and PC are trademarks of International Business Machines

Corporation.

Intel is a trademark of Intel Corporation.

MS-DOS is a trademark of Microsoft Corporation.

SMC is a trademark of Standard Microsystems Corporation.

NCR is a trademark of NCR Corporation.

All other product names or trademarks are the properties of their

respective owners.

Part No. 2006617530

3rd Edition Printed in Taiwan December 1998

iii

A Message to the Customer

Advantech Customer Services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the harsh and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our primary concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products.

So if you run into technical difficulties, we are here to help. For the

most frequently asked questions, you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the

installation and operation of any of our products.

Product Warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

one year from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us to

process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Initial inspection

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCA-6175 Pentium®II single board computer

• 1 Pentium II CPU and cooling fan (optional)

• 1 PCA-6175 user's manual

• 1 bus master & BIOS utility driver

• 2 disks, for OBS Win95 drivers

• 1 FDD cable

• 2 EIDE HDD cables

• 1 printer cable

• 1 temperature sensor cable

• 1 ivory cable for keyboard and mouse

• 1 ATX-to-PS/2 power cable

• 1 Pentium II CPU retention module

If any of these items are missing or damaged, contact your

distributor or sales representative immediately.

We have carefully inspected the PCA-6175 mechanically and

electrically before shipment. It should be free of marks and scratches

and in perfect working order upon receipt.

As you unpack the PCA-6175, check it for signs of shipping damage.

(For example, damaged box, scratches, dents, etc.) If it is damaged or

it fails to meet the specifications, notify our service department or

your local sales representative immediately. Also notify the carrier.

Retain the shipping carton and packing material for inspection by the

carrier. After inspection, we will make arrangements to repair or

replace the unit.

Contents

Chapter 1 Hardware Configuration .............................. 1

1.1 Introduction........................................................................2

1.2 Features...............................................................................3

1.3 Specifications ......................................................................4

System..................................................................................4

Memory................................................................................4

Input/Output .........................................................................4

Industrial features ................................................................5

Mechanical and environmental specifications.....................5

1.4 Board Layout: Main Features ..........................................6

1.5 Jumpers and Connectors...................................................7

1.6 Board Layout: Jumper Locations ....................................9

1.7 Board Layout: Connector Locations..............................10

1.8 Safety Precautions............................................................11

1.9 Jumper Settings................................................................12

1.9.1 How to set jumpers ...................................................12

1.9.2 CPU core frequency (J5)...........................................12

1.9.3 CMOS clear (J6) .......................................................13

1.9.4 Watchdog timer output (J8) ......................................13

1.9.5 CPU bus clock select (J11) .......................................14

1.9.6 DiskOnChip®2000 Flash disk address select (J12) ..15

1.10 System Memory................................................................16

1.11 Memory Installation Procedures ....................................18

1.12 Cache Memory .................................................................19

1.13 Mounting the CPU and Cooling Modules......................20

1.14 On-board Support Bracket .............................................22

vii

Chapter 2 Connecting Peripherals ............................ 23

2.1 Primary (CN6) and Secondary (CN7) IDE

Connectors ........................................................................24

2.2 Floppy Drive Connector (CN13).....................................24

2.3 Parallel Port Connector (CN8) .......................................25

2.4 Keyboard & PS/2 Mouse Connector (CN12).................25

2.5 Serial Ports (CN9: COM1; CN10: COM2)....................26

2.6 Front Panel Connectors (CN2, CN3, CN4, J1 and J2) .27

2.6.1 Keyboard lock and power on LED (CN2) ................27

2.6.2 External speaker (CN3).............................................27

2.6.3 IDE LED (CN4) ........................................................27

2.6.4 ATX soft power switch (J1)......................................27

2.6.5 Reset (J2) ..................................................................27

2.7 ATX Power Control Connectors (J7 and J1) ................28

2.7.1 ATX feature connector (J7) and soft power switch

connector (J1)............................................................28

2.7.2 Controlling the soft power switch.............................29

2.8 USB Connector (CN11) ...................................................29

2.9 IR Connector (CN1).........................................................30

2.10 External Keyboard Connector (J10)..............................30

2.11 External Suspend Switch Lead (SMI) (J3) ....................30

viii

Chapter 3 Award BIOS Setup ..................................... 31

3.1 Introduction......................................................................32

3.2 Entering Setup..................................................................32

3.3 Standard CMOS Setup....................................................33

3.4 BIOS Features Setup .......................................................34

3.4.1 Virus Warning...........................................................34

3.4.2 Quick Power On Self Test ........................................35

3.4.3 Quick Booting ...........................................................35

3.4.4 Boot Sequence...........................................................35

3.4.5 Boot Up Floppy Seek ................................................36

3.4.6 Boot Up NumLock Status .........................................36

3.4.7 Boot Up System Speed .............................................36

3.4.8 IDE HDD Block Mode .............................................36

3.4.9 Gate A20 Option .......................................................36

3.4.10 Typematic Rate Setting...........................................37

3.4.11 Typematic Rate (Chars/Sec) ...................................37

3.4.12 Typematic Delay (msec) .........................................37

3.4.13 Security Option .......................................................37

3.4.14 OS Select for DRAM > 64 MB...............................37

3.4.15 Video BIOS Shadow ...............................................38

3.4.16 C8000-CBFFF Shadow / DC000-DFFFF Shadow .38

3.5 CHIPSET Features Setup ...............................................39

3.6 Power Management Setup ..............................................40

3.6.1 Power Management ..................................................40

3.6.2 HDD Power Management.........................................40

3.6.3 IRQ Activity..............................................................41

3.7 PCI Configuration Setup.................................................41

3.7.1 Load BIOS Defaults..................................................41

3.7.2 Load Setup Defaults..................................................41

3.8 Integrated Peripherals.....................................................42

3.9 Password Setting ..............................................................43

3.10 IDE HDD Auto Detection ................................................43

3.11 Save & Exit Setup ............................................................44

3.12 Exit Without Saving.........................................................44

Chapter 4 On-board Security Setup .......................... 45

4.1 Introduction......................................................................46

4.2 Installation of OBS Devices.............................................46

4.3 Driver Installation............................................................47

4.3.1 Necessary prerequisites.............................................47

4.3.2 Before you begin.......................................................47

4.3.3 Windows 95 drivers setup procedure........................48

Appendix A Programming the Watchdog Timer....... 59

Programming the Watchdog Timer .........................................60

Appendix B Pin Assignments .................................... 63

B.1 COM1/COM2 RS-232 Serial Port (CN9,CN10)...........64

B.2 Keyboard and Mouse Connnector (CN12) ....................64

B.3 External Keyboard Connector (J10)..............................64

B.4 ATX Feature Connector (J7) ..........................................65

B.5 IDE Hard Drive Connector (CN6, CN7)........................65

B.6 USB Connector (CN11) ...................................................66

B.7 CPU Fan Power Connector (CN5) .................................66

B.8 Floppy Drive Connector (CN13).....................................67

B.9 Parallel Port Connector (CN8) .......................................68

B.10 IR Connector (CN1).........................................................69

B.11 HDD LED Connector (CN4) ...........................................69

B.12 Power LED and Keylock Connector (CN2)...................69

B.13 External Speaker (CN3) ..................................................70

B.14 System I/O Ports ..............................................................71

B.15 DMA Channel Assignments ............................................72

B.16 Interrupt Assignments.....................................................72

B.17 1st MB Memory Map.......................................................73

Appendix C DOC®2000 Installation Guide................ 75

C.1 DiskOnChip®2000 Quick Installation Guide................76

C.1.1 DiskOnChip®2000 installation instructions ............76

C.1.2 Additional information and assistance .....................77

Indice

Altri manuali Advantech Computer a scheda singola

Advantech

Advantech ASMB-784 Manuale di installazione e funzionamento

Advantech

Advantech PCA-6005 Manuale utente

Advantech

Advantech PCM-9371 Manuale utente

Advantech

Advantech PCM-9577 Manuale utente

Advantech

Advantech PCE-3029 Manuale utente

Advantech

Advantech MIO-5152 Manuale di installazione e funzionamento

Advantech

Advantech PCA-6763 Manuale utente

Advantech

Advantech PCM-9363 Manuale utente

Advantech

Advantech PCM-3362N Manuale utente

Advantech

Advantech MIC-3357 Manuale utente

Advantech

Advantech PCA-6012 Manuale di installazione e funzionamento

Advantech

Advantech PCI-6873 Manuale di installazione e funzionamento

Advantech

Advantech PCM-4822 Manuale utente

Advantech

Advantech ASMB-923I Manuale di installazione e funzionamento

Advantech

Advantech RSB-3730 Manuale utente

Advantech

Advantech ASMB-822I Manuale di installazione e funzionamento

Advantech

Advantech PCM-9363 Manuale di installazione e funzionamento

Advantech

Advantech PCE-5127 Manuale di installazione e funzionamento

Advantech

Advantech PCM-9591 Manuale di installazione e funzionamento

Advantech

Advantech PCE-7132 Manuale di installazione e funzionamento

Advantech

Advantech PCM-9342 Manuale di installazione e funzionamento

Advantech

Advantech RSB-4220 Manuale utente

Advantech

Advantech RSB-4710 Manuale utente

Advantech

Advantech PCA-6028 Manuale di installazione e funzionamento

Manuali Computer a scheda singola popolari di altre marche

WIN Enterprises

WIN Enterprises PL-80910 Manuale utente

AXIOMTEK

AXIOMTEK SBC81206 Series Manuale utente

Embest

Embest SOM-PH8800 Manuale utente

SeaLevel

SeaLevel SBC-R9 Manuale utente

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuale utente

WinSystems

WinSystems PPM-LX800-G Manuale utente

GIGAIPC

GIGAIPC QBiX-PPC Series Manuale utente

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuale utente

Commell

Commell FS-978 Manuale utente

GIGAIPC

GIGAIPC QBiP-8665A/ Manuale utente

VersaLogic

VersaLogic Python EBX-11 Manuale utente

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuale utente

CompuLab

CompuLab SB-A510 Manuale utente

Boser

Boser HS-7321 Manuale utente

Premier Farnell

Premier Farnell Embest SBC8530 Manuale utente

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuale utente

Aaeon

Aaeon UP Manuale utente

Portwell

Portwell WUX Series Manuale utente