Advantech ADAM-6520 Series Manuale utente

ADAM-6520

5-Port Industrial 10/100 Mbps

Ethernet Switch

User Manual

ADAM-6520 User Manual ii

The documentation and the software included with this product are copy-

righted 2005 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

This Manual Covers the Following Models

• ADAM-6520

• ADAM-6520I

Part No. 2003652011 3rd Edition

Printed in Taiwan October 2005

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

ADAM-6520 User Manual iv

Declaration of Conformity

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

FCC Class A

Note: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful inter-

ference in which case the user will be required to correct the interference

at his own expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Document Feedback

To assist us in making improvements to this manual, we would welcome

comments and constructive criticism. Please send all such - in writing to:

[email protected]

Contents

Chapter 1 Overview .......................................................... 2

1.1 Introduction ....................................................................... 2

1.1.1 High-Speed Transmission .............................................. 2

1.1.2 Flexible Mounting .......................................................... 2

1.1.3 Advanced Protection for Power Line and Ethernet Port 2

1.1.4 Wide Operating Temperature Range ............................. 3

1.1.5 Easy Troubleshooting .................................................... 3

1.2 Features ............................................................................. 3

1.3 Specifications .................................................................... 4

1.4 Ordering Information ........................................................ 5

Chapter 2 Installation ....................................................... 8

2.1 Packing List....................................................................... 8

2.2 Top / Front / Rear View .................................................... 9

2.2.1 Dimensions .................................................................... 9

Figure 2.1:Top View ...................................................... 9

Figure 2.2:Front Panel ................................................... 9

Figure 2.3:Rear View ..................................................... 9

2.3 LED Indicators ................................................................ 10

Table 2.1:ADAM-6520 LED Definitions .................... 10

2.4 Mounting ......................................................................... 11

Figure 2.4:Panel Mounting .......................................... 11

Figure 2.5:DIN Rail Mounting .................................... 12

Figure 2.6:Piggyback Stacking .................................... 12

2.5 Network Connection ....................................................... 13

2.5.1 Connection to Devices ................................................. 13

2.5.2 Connection to other Hubs or Switches ........................ 13

2.6 Power Connection ........................................................... 14

ADAM-6520 User Manual vi

CHAPTER

Overview

This chapter gives an overview of the

ADAM-6520’s features and full speci-

fications.

Sections include:

• Introduction

• Features

• Specifications

• Ordering Information

ADAM-6520 User Manual 2

Chapter 1 Overview

1.1 Introduction

ADAM-6520 is a 5-port industrial-grade 10/100 Mbps Ethernet switch

for fast and cost-efficient network expansion. It connects up to 5 worksta-

tions and auto-detects both 10 and 100 Mbps network speeds. Moreover,

ADAM-6520 supports auto crossover to provide a flexible networking

environment, connecting to the network with any port.

ADAM-6520 provides three methods for mounting in an industrial envi-

ronment: DIN rail, wall/panel, or piggyback stacking. ADAM-6520 has a

flexible input voltage range of +10~30 VDC at the terminal block. And,

the operating temperature of ADAM-6520 is from -10 to 70° C while

ADAM-6520I is from -40 to 85° C. The above features make ADAM-

6520 more stable and reliable than normal Ethernet switches. Thus,

ADAM-6520 is especially suitable for industrial environments with

Ethernet networking like: semiconductor factories, warehouses, conveyer

belt systems and more.

1.1.1 High-Speed Transmission

ADAM-6520 includes a switch controller that automatically senses trans-

mission speeds (10/100 Mbps). The RJ-45 interface also supports auto-

detection, so MDI or MDI-X is automatically selected and a crossover

cable is not required. All Ethernet ports have memory buffers that support

the store-and-forward mechanism. This assures that data is properly

transmitted.

1.1.2 Flexible Mounting

Due to its versatility and innovative design, ADAM-6520 can be fixed in

three ways: DIN rail, panel and piggyback mounting.

1.1.3 Advanced Protection for Power Line and Ethernet

Port

The power line of ADAM-6520 supports up to 3000 VDC surge protec-

tion, which secure equipment against unregulated voltage and make sys-

tems safer and more reliable. Meanwhile, 4000 VDC ESD protection for

the Ethernet ports makes ADAM-6520 more suitable for harsh environ-

ments.

3 Chapter1

1.1.4 Wide Operating Temperature Range

The operating temperature of ADAM-6520 is from -10 to 70° C, while

ADAM-6520I offers a very wide range from -40 to 85° C. With such a

wide range you can use ADAM-6520 and ADAM-6520I in some of the

harshest industrial environments that exist.

1.1.5 Easy Troubleshooting

There are six LED indicators supplied to aid troubleshooting for ADAM-

6520. Besides one common collision LED, each port has a pair of LEDs

to indicate link status and port activity. That makes it easy to indicate col-

lisions, link status, power failure and data reception for on-site diagnos-

tics.

1.2 Features

• Provides 5 x 10/100 Mbps Ethernet ports with RJ-45 connector

• Supports full/half duplex flow control

• Supports MDI/MDI-X auto crossover

• Provides broadcast storm protection

• Embedded switch controller, supports auto-negotiation

• Embedded memory buffer, supports store-and-forward transmission

• Supports +10 ~ 30 VDC voltage

• Provides 3000 VDC surge protection for power line

• Provides 4000 VDC Ethernet ESD protection

• Provides flexible mountings: DIN rail, panel, piggyback stacking

• Supports wide-range operating temperature

ADAM-6520 User Manual 4

1.3 Specifications

Communications

• Compatibility: IEEE 802.3, IEEE 802.3u

• LAN: 5 x 10/100 Base-TX

• Transmission Distance: 100 m

Interface

• Connectors: 5 x RJ-45 (10/100 Mbps),

1 x Plug-in screw terminal for power input

• Indicators: LEDs for : Power, 10/100 Mbps

Power

• Input Voltage: Unregulated 10 ~ 30 VDC

• Power Consumption: Max. 2.4 W

Mechanism

• Enclosure: IP30, ABS+PC

• Dimensions: 70 x 100 x 25 mm (W x H x D)

• Mounting: DIN 35 rail, stack, wall

Protection

• ESD Protection: 4000 VDC (Ethernet)

• Surge Protection: 3000 VDC (Power)

Environment

• Operating Temperature:

DIN rail or wall mounted:

ADAM-6520: -10 ~ 70° C (14~158° F)

ADAM-6520I: -40 ~ 85° C (-40~185° F)

Stack mounted:

ADAM-6520: -10 ~ 60° C (14~140° F)

ADAM-6520I: -40 ~ 75° C (-40~167° F)

• Storage Temperature:

ADAM-6520: -20 ~ 80° C (-4~176° F)

ADAM-6520I: -50 ~ 95° C (-58~203° F)

• Operating Humidity: 20 to 95% (non-condensing)

• Storage Humidity: 0 to 95% (non-condensing)

Altri manuali per ADAM-6520 Series

Indice

Altri manuali Advantech Interruttore

Advantech

Advantech B+B SMARTWORX IE-iMcV-T1-Mux/4 +Ethernet Manuale utente

Advantech

Advantech EKI-8500 Series Manuale utente

Advantech

Advantech EKI-2706E-1GFP/I Manuale di installazione e funzionamento

Advantech

Advantech MIO-3110 Manuale di installazione e funzionamento

Advantech

Advantech B+B SmartWorx SE400 Series Manuale utente

Advantech

Advantech EKI-7659CPI Manuale utente

Advantech

Advantech EKI-3525M Manuale di installazione e funzionamento

Advantech

Advantech EKI-7526MI Manuale utente

Advantech

Advantech EKI-2525PA Manuale utente

Advantech

Advantech EKI-2548I Manuale utente

Advantech

Advantech SNMP-1000-B1 Manuale utente

Advantech

Advantech LEO-S595-WBG0 Manuale utente

Advantech

Advantech ProView Series Manuale utente

Advantech

Advantech BB-UH104 Manuale utente

Advantech

Advantech EKI-2728MI Manuale utente

Advantech

Advantech B+B SmartWorx MiniMc-Gigabit Manuale utente

Advantech

Advantech EKI-7710E-2C Manuale utente

Advantech

Advantech EKI-9516P-HV Manuale utente

Advantech

Advantech EKI-2528i-m12 Manuale di installazione e funzionamento

Advantech

Advantech EKI-7659CI Manuale utente

Advantech

Advantech EKI-9728G Series Manuale utente

Advantech

Advantech EKI-9628G Manuale utente

Advantech

Advantech EKI-2525M Manuale utente

Advantech

Advantech EKI-4524RI Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente