AEE AT102 Manuale utente

U s e r ' s M a n u a l

2.4GHz Color Wireless Camera Kit

MODEL: At102 & ZT 735

A E E T E C H N O L O G Y

C O . , L T D .

Please read this manual carefully and thoroughly before any

attempt to install and operate this product and retain it for your

future reference.

English

T R O U B L E S H O O T I N G

When you experience the operation problems, please check and try

the following yourself before claiming that it is the defective product or

consulting the experienced technician.

Abnormal Phenomena Possible Reasons/Solutions

image

No sound

Check whether the camera/receiver

is connected to power supply and

powered on.

1. Check if the channel of receiver is

Snowflake

Noisy

the same as that of camera;

2. Check the distance & blocks.

Blurimag

Normalsound

Adjust the lens of camera.

Ghost

image

Normal sound

1. Interfered with other devices;

2. Check the distance & blocks.

No color

Normal sound

Mismatching the TV system of PAL

or NTSC.

Normal

image

Noisy

Interfered with other devices nearby;

Remove or turn off such devices.

E U E n v i r o n e n t a l P r o t e c t i o n

Waste electrical products should not be disposed of with

household waste. Please recycle where facilities exist.

Check with your Local Authority or retailer fo

r recycling

advice.

S P E C I F I C A T I O N S

It e s Va lu e

Transmission Frequency ISM 2,400MHz~ 2,483MHz

Antenna Type Omni

Transmission Distance 100m (Without Block)

Operating Temperature

F F

Storage Temperature

20C~+60C /

4~+140

Storage Humidity ~85% RH

Imaging Sensor 1/3 inch CMOS

CMOS Total Pixels 628 582 (PAL)/ 510 492 (NTSC)

S/N Ratio 40dB (AGC OFF)

Horizontal Resolution 380 TV Lines

Minimum Illumination 5 Lux/F1.2

Transmission Power 10mW (CE)/2mW (FCC)

Power Supply DC 7.5V 300mA

Consumption Current 80 mA (Max.)

Dimensions (WxDxH) 23mmx31mmx23mm (Main Body)

Weight Approx.20g (Main Body)

Receiving Sensitivity 85dBm

Power Supply DC 8.0V 200mA

ConsumptionCurrent 150mA(Max.)

Video Output Level 1

p p Ω @75

Audio Output Level 1

p p Ω @10k

Dimensions (WxDxH) 100mmx70mmx18mm (Main Body)

Weight Approx. 99g (Main Body)

* Specifications are subject to minor change without prior notice.

T A B L E O F C O N T E N T S

SP EC I FI C ATIO NS 14

TR OU BLE SHO OTING 15

1~4

1~2

IN TR ODU CTI ON

Notice

Approval Information (FCC/CE )

Warranty

Restrictions

Maintenance

5~7

PR ODU CT

Package Contents

Feature Locations

Adapter & Battery Clip

INST ALLATION & USAGE

Installation

FixtheCamera

Locate the Receiver

Camera Channel Setup

Receiver Mode Setup

8~ 13

8~10

11~12

1. mode: Slide switch off to enter mode. In this mode,

Man u al Man u al

the receiver channel won't change until you press the C h anne l Sel e ct

“SEL" button;

2. mode: Slide L switch on to enter channel scan mode.

Cha n nel S can

In this mode, all the available channels will display one by one

looping in turn per 5s. So you can watch the situations from up to 4

different cameras via one receiver.

Locate the Receiver

The receiver can be placed horizontally or vertically. When it is placed

vertically, the supplied holder is required.

Horizontal Vertical

Ca era Channel Setup

This camera has 4 selectable channels to avoid possible interference

from other nearby wireless devices. Please open the channel switch

cover and set the Channel Switch as the following diagram.

I N T R O D U C T I O N

Thank you for your interest and support in our product and purchasing

this wireless camera kit. This product works at ISM 2.4GHz frequency

band, which could be legally used worldwide without permission.

We f eel confident that you will be pleased with the quality and features of

this product.

The camera features one CMOS image sensor and a transmitting

module to capture the image and transmit them wirelessly.

The receiver features a receiving module to receive and outputAV

signals.

Notice

Notice: This product may cause interferences with other wireless

equipment that operates at 2.4GHz ISM band. Please turn off one of

the equipments to eliminate the interference.

Product Assurance: This camera will emit electromagnetic wave, just

like other wireless products. But its transmitting power is lesser than

other wireless products such as mobile phones. The 2.4GHz wireless

camera meets wireless frequency security standards and

recommended indexes while working. These standards and indexes

are certificated by academic organization and represent the cogitative

research of the scientific workers who continuously explore and

annotate the involved fields. So we believe that our products are safe

for customers

Approval Infor ation

All our products meet the requirements of approval FCC or CE, and

are granted the FCC or CE certification. They are authorized to bear

FCC or CE mark.

C h a n n e l F r e q u e n c y

CH 1=2,414 MHz;

CH2=2,432MHz;

CH3=2,450MHz;

CH4=2,468MHz

FCC

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which and be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the

receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for

help.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions (1) This device may not cause

harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation

Changes and modification not expressly approved by the manufacturer

or registrant of this equipment can void your authority to pperate this

equipment under Fedral Communications Commissions rules.

F i x t h e C a e r a

Please follow the steps below if you want to fix the camera to wall or

ceiling.

1. Fix to Wal l

1.1 Drill one hole on the mounting surface, insert the anchor into the

hole, then align the mounting plate with the hole you just drilled

and drive the screw through the plate into the anchor;

1.2 Hang the camera on the hooks of mounting plate;

1.3 Push downwards the camera firmly.

2. Fix to Ceiling

2.1 Detach the universal bracket from the camera and then install it to

the camera top for avoiding reverse picture;

2.2 Secure the mounting plate to ceiling with screw;

2.3 Hang the camera on the hooks of mounting plate;

2.4 Push the camera firmly as the shown direction.

2 11

7. If the picture is blur, you could adjust the lens focus with lens W a r r a n t y

adjuster to make the picture clear.

N o t e s :

You can paste the foam base on the bottom of the Universal Bracket to fix the

camera.

When you fix the camera with the mounting plate the foam base can not be

pasted on the bottom of the Universal Bracket.

Please refer to Fi x t h e C ame r a section on page 11 more details to fix the for

camera with the mounting plate.

9. Adjust the brightness, contrast and color setting of the monitor/TV

to get the best display effect.

This manual is furnished under license and may be used or copied only

in accordance with the terms of such license. Except as permitted by

such license, no part of this publication may be reproduced, stored in a

retrieval system, or transmitted, in any form or any means, electronic,

mechanical, recording, or otherwise, including translation to another

language or format, without the prior written permission of AEE

Technology.

The content of this manual is furnished for informational use only, is

subject to change without notice, and should not be construed as a

commitment byAEE Technology.

AEE Technology assumes no responsibility or liability for any errors or

inaccuracies that may appear in this booklet. All other product names,

trademarks and registered trademarks in this document are the

properties of their respective holders.

Lens Adjuster

AEE Technology warrants that this product will be free from defects in

materials and workmanship for period of time specified. This limited

warranty shall commence from the date of purchase. AEE

Technology

product's warranty is not transferable and is limited to the original

purchaser. If the product is found to be defective then, as your sole

remedy and as the manufacturer's only obligation, AEE Technology

will repair or replace the product. This warranty shall no

t apply to

products that have been subjected to abuse, misuse, abnormal

electrical or environmental conditions, normal wear and tear or any

condition other than what can be considered normal use. Should you

have problems, please consult the local dealer.

C o p y r i g h t

8. Mount the camera to a desired location.

R e s t r i c t i o n s

1. DO NOT use this product to violate one's privacy. Monitoring one's

activities without consent is illegal and this product is not designed

and manufactured for such purpose;

2. DO NOT put this product near any medical equipment. Radio

waves might potentially cause breakdown of electrical medical

equipment. So this product should be placed at least 1 feet away

from any heart pacemaker. Radio waves might potentially

influence heart pacemaker and lead to respiratory disturbance;

3. DO NOT use this product for any illegal activities. AEE Technology

shall not be responsible for any consequences of illegal acts

committed by the user.

M a i n t e n a n c e

1. Ensure the sufficient ventilation space is available;

2. Do not shake or strike the product;

3. Keep it dry and dustless and avoid exposing it to direct sunlight;

4. Do not place product near any magnetic objects;

5. Avoid putting the product in places where the constantly changed

temperature or humidity occurs;

6. Keep product away from heat sources such as electric heater;

7. Do not use the camera near aggressive chemicals;

8. Do not use this camera near water, for example, near a bath tub,

wash bowl, kitchen sink or laundry tub, in a wet basement or near

a swimming pool and the like;

9. Do not use the camera in the places which are enclosed by metal.

The surrounding metal like lifter, cabin, may shield the

electromagnetic wave, and result in failure of signal reception;

10. Please obey the local government's environment protection policy;

11. Please turn off the power when left unused;

12. Do not disassemble or repair the camera or receiver, doing so

might cause damages to the product.

4. Connect the power jack of adapter (DC 8.0V 200mA) to receiver.

Note: Please refer to Receiver Mode Setup section

on page 13 for more details.

5. Open the channel switch cover and set the camera to one desired

channel.

Notes:

Please refer to Camera Channel Setup section on page 13 for more details.

Please recover the channel switch after finished setting.

6. Press the channel select button on the receiver until the

"S EL EC T"

channel indicator matches to the channel on the corresponding

camera, and the monitor/TV will display pictures.

I N S T A L L A T I O N & U S A G E

I n s t a l l a t i o n

1. Connect the powerjack of adapter (DC 7.5V 300mA) or battery

with battery clip to camera.

a . C o n n e c t w i t h a d a p t e r

2. Connect the antenna to the receiver.

3. Connect the receiver to the monitor/TV with AV cable. (Red socket

for audio; yellow socket for video). Turn on the monitor/TV and

selectAV mode.

P R O D U C T

P a c k a g e C o n t e n t s

This package comes with the following items. Please check whether

they are all included in the packaging box, if one or some is missing,

contact the retailer for

replacement.

1 Wireless camera 1

2 Wireless receiver 1

3 Antenna for receiver 1

4 Holder for receiver 1

5 Mounting plate for camera 1

6 DC 7.5V power adapter for

camera 1

7 DC 8.0V power adapter for

receiver 1

8 AV cable 1

9 Lens adjuster 1

10 Channel pick for camera 1

11 Mounting screw 1

12 Foam base for camera 1

13 User's manual 1

14 Battery clip 1

Note:

1. This product can be either black or silver.

2. The pictures may vary from the actual

objects.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali AEE Telecamera IP

AEE

AEE HD77 Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente