AEG ARE H9 HF Manuale utente
---------------------------------------------------------------1/51------------------------------------------
User Guide
ARE H9 HF
Pocket Reader
ARE H9 HF
---------------------------------------------------------------2/51---------------------------------------
1 INTRODUCTION 4
2 ELE ENTS OF THE ARE H9 HF 5
3 OPERATION GUIDE 6
3.1 Installation of the battery 6
3.2 Power on/off 6
3.3 Reading a transponder in standard mode 7
4 READING RANGE 8
4.1 Orientation with air coil antenna 9
4.2 Orientation with ferrite antenna 10
5 DATABASE 10
6 ENU FUNCTIONS 11
6.1 Navigating trought the menu function 11
6.2 Overview of the menu functions 12
6.3 Set Attribute 13
6.4 Operating ode 14
6.5 Set interface 19
6.6 Lock up reader 25
6.7 irror Code 26
6.8 Erase memory 26
6.9 Reading time 27
6.10 Turn-off time 27
6.11 Turn-on delay 28
---------------------------------------------------------------3/51---------------------------------------
6.12 Keyboard sound 28
6.13 Set time (available only with Real-Time-Clock module expansion) 29
6.14 Set date (available only with Real-Time-Clock module expansion) 30
6.15 Language/Sprache – select display language 31
6.16 Reader version 31
7 DATA EXCHANGE PROTOCOL 31
7.1 Set of commands 31
7.2 Protocol structure 32
7.3 Checksum CRC 33
7.4 Structure of the data base 35
7.5 Simplified read out procedure, without programming the CRC-routine 36
7.6 The command structure in detail 37
7.7 Parameter changing commands 39
7.8 Attributes 41
8 CONTROL CHARACTERS USED IN THE ONLINE ODE 43
9 USB DRIVER INSTALLATION 43
10 TECHNICAL SPECIFICATIONS 49
11 OPERATION WITH OTHER RFID EQUIP ENT 49
12 SAFETY INSTRUCTION 50
13 FCC INFOR ATION 50
14 NOTIFICATION OF CHANGES 51
15 CONTACTS 51
---------------------------------------------------------------4/51---------------------------------------
1Introduction
The ARE H9 HF is a RFID Pocket Reader desi ned to read passive
transponders.
It has the ability to store the transponder codes in its internal database.
This Pocket Reader is equipped with a USB interface and optional Bluetooth or
RS232 interface, which allows transmittin sin le transponder codes or its entire
database to a computer.
The ARE H9 HF is capable to read the followin transponder types:
•ISO 14443A
•ISO 15693
Before the initial use of this ARE H9 HF reader please study this manual carefully.
---------------------------------------------------------------5/51---------------------------------------
2Elements of the ARE H9 HF
2x16 Character
LCD-Display
Menu option buttons
(left, menu, ri ht)
USB connector **)
Main button
(read, select)
Battery
compartment
ARE H9 HF
**) RS232 cable in Rs232 version
---------------------------------------------------------------6/51---------------------------------------
3Operation Guide
3.1 Installation of the battery
Slide door of the battery compartment to open it.
Attach the Battery to the connector inside. Put the Battery into the
compartment.
9V Block
Battery
Batterieclip
-
+
Slide the door back to close it. Use only 9V E-Block alkaline Batteries of the
Type 6LR61.
3.2 Power on/off
The Pocket Reader is switched on by pressin the main button for 0,5s (default).
The reader starts in readin mode.
The ARE H9 HF will switch off automatically after 20s (default) when no button
has been pressed within this time.
---------------------------------------------------------------7/51---------------------------------------
3.3 Readin a transponder in standard mode
Press the main button to start the readin process.
The ARE H9 HF starts the readin process and the display shows:
0 of 2016
Scanning Nr. 1
actual
count
maximum
count
Approach a transponder within the readers readin ran e.
The reader emits a beep when the transponder has been read successfully, and the
transponder code is shown on the display:
4E779B90
ISO-14443A
In case no transponder has been read within the iven time frame, the reader stops
its readin process and the display shows:
--- No Tag ---
For further readin processes release the main button and press it a ain for each
attempt.
---------------------------------------------------------------8/51---------------------------------------
4Readin ran e
The readin ran e and distance depends on the antenna type of the readin
device, the transponder, its packa in and orientation to the reader. The ARE
H9 HF is available ether with air coil antenna or ferrite antenna.
It is not possible to read two or more transponders at the same time.
---------------------------------------------------------------9/51---------------------------------------
4.1 Orientation with air coil antenna
The followin dia ram shows the typical area where a card transponder should
be read:
---------------------------------------------------------------10/51---------------------------------------
4.2 Orientation with ferrite antenna
The followin dia ram shows the typical area where a card transponder should
be read:
5Database
When a readin had been accomplished successfully, in the standard operatin
mode, the ARE H9 HF internal database will be checked whether this transponder
code is already stored.
If the new code, in combination with the attribute, is not found in the database, it
will be stored as a new record. This record is composed of the ID-code, the
transponder type and the selected attribute. With the optional real time clock
module date and time of readin will be also stored.
If the new code is already stored in the database, it will be not stored a ain. In this
case the reader emits 2 successive beeps.
The database is capable to store up to 2016 transponder codes. When the
maximum of the stora e is reached no further new code is stored. To store new
codes in this case the database has to be erased.
On Power Loss the ARE H9 HF will keep its database data.
The database of the ARE H9 HF with all its actual records could be transmitted
to a PC. This is done in the Database/USB mode.
Indice
Altri manuali AEG Sistema RFID
