AEG Protect 3.M 2.0 Manuale utente

Protect

3.M 2.0

Modular uPs systeM

Uninterruptible Power Supply

3-Phase Input; 3-Phase Output

20–120 kVA power supply

Networks, workstations, intranet and internet servers,

telecommunications applications and other company

applications must be permanently available. AEG

Protect 3.M 2.0 is the modular UPS solution for IT and

telecommunications. Modern data centers require the

highest levels of efﬁciency, reliability and ﬂexibility.

Protect 3.M 2.0 provides a technically convincing

and reliable solution to this requirement that can be

modularly adapted to any increasing power demand.

An extension can be made at any time during

operation. The ﬂexible redundancy concept ensures a

steady power supply to any connected devices.

Lower operating costs for energy and cooling with high

efﬁciency and fast module replacement in the event of power

failure, reduce operational costs and ensure an optimal price

vs. performance ratio for the Protect 3.M 2.0 UPS solution.

Key features

»Modular design allows for flexible adaption

to the current power demand

»Up to 95% efficiency in “online double conversion”

mode, up to 98% in ECO mode

»IGBT technology, input power factor >0.99

»Low phase effect <3%

»Redundant control and n+x parallel

redundancy for high availability

»Parallel operation of up to 4 UPS units (max. 480kVA)

»Module installation and removal during operation

(”hot swappable”)

»Graphical LCD screen

»Built-in manual bypass, separate input for bypass power

»Load dependent fan speed

»Small footprint

Functional buttons ON/OFF

Front-EPO

System status LEDs

• Normal

• Battery

• Bypass

• Error

Power outages can

lead to signiﬁcant

ﬁnancial loss

Almost all labor and

production processes today

are based on high capacity

data and IT infrastructure.

Power outages or voltage

ﬂuctuations that lead to

systems failure end almost

always with disrupted

operations, loss of production

and, at worst, irretrievable data

loss.

Your important IT infrastructure

must be permanently available

and protected against power

disturbances of all kinds.

Through the use of VFI

(conversion) technology,

Protect 3.M 2.0 reliably protects

your systems against power

outages and network

disruptions and ensures the

value of your business.

Modularity provides

safety reserves and

ﬂexibility

Protect 3.M 2.0 is an

uninterruptible power supply

of the highest reliability.

With increasing demands on

performance, the compact

modular design adapts

the permitted UPS power

according to your current

power needs. This can be done

without additional installation

costs since the power modules

can be easily inserted and are

automatically recognized by

the system (“hot swappable”).

No additional connections are

required for this operation.

Dynamic redundancy

An automatic load balancing

to all modules within an

appropriately designed system

delivers N+x redundancy

without the requirement for

any conﬁguration changes or

increases to load capacity.

High efﬁciency lowers

operating costs and

CO2emissions

Protect 3.M 2.0 is based

on high efﬁciency IGBT

technology. This provides

an efﬁciency of up to 95%

in double conversion mode.

With a 35% loading, the UPS

still maintains an efﬁciency

of 94%. In addition to the

lowering of power loss

unwanted generation of

heat is also reduced, thereby

reducing air conditioning

requirements. All of this leads

to signiﬁcant cost savings and

a reduction in CO2emissions.

Input power factor 1.0

100% active power from the

UPS reduces the generator

speciﬁcation and consequent

installation cost increases.

Protect 3.M 2.0

Classification VFI SS 111 acc. to IEC 62040-3 Protect 3.M 2.0

Power type rating 20 kVA 40 kVA 60 kVA 80 kVA 100 kVA 120 kVA

16 kW 32 kW 48 kW 64 kW 80 kW 96 kW

SYSTEM

Nominal input current 29 A 59 A 88 A 117 A 145 A 172 A

Efficiency (typical) 95 %

Efficiency in ECO mode 98 %

Waste heat from power (typical) 1.3 kW 2.6 kW 3.9 kW 5.2 kW 6.5 kW 7.8 kW

4436 BTU/h 8872 BTU/h 13308 BTU/h 17744 BTU/h 22180 BTU/h 26616 BTU/h

Airflow (max.) m³/h 309 617 926 1234 1543 1852

INPUT

Nominal voltage 3 x 400 V (380 V, 415 V adjustable), 3 phase + neutral

Input voltage range 305 – 477 V

Frequency 50 Hz/ 60 Hz (adjustable)

Total harmonic distortion (THDv) ≤3 % 1)

Power factor >0.99

INVERTER

Nominal voltage 3 x 400 V (380 V, 415 V adjustable), 3 phase + neutral

Frequency 50 / 60 Hz (adjustable)

Precision static/dynamic ±1 % / ±7 %

Total harmonic distortion (THDv) <3 % ( linear load), <5 % (non-linear load)

Max. phase displacement ±1.5 % (balanced load), ±2 % (100 % unbalanced load)

Admissible overload 125 % for 10 min., 150 % for 60 s

Crest factor 2.7 : 1

Max. short circuit current >270 % of the rated current

Admissible power factor 0.1 inductive to 0.1 capacitive

BATTERY

Rated voltage ±240 V DC

Max. charging power 5 A 10 A 15 A 20 A 25 A 30 A

Charging principle Load switching per power module

Autonomy time Selectable over external battery cabinet

STATIC BYPASS

Nominal voltage 3 x 400 V (380, 415 V adjustable), 3 phase + neutral

Frequency 50 Hz / 60 Hz (adjustable)

Synchronization range ±0.1 – ±5 % (adjustable)

Transfer time at mains outage 0 ms (without interruption)

Admissible overload 175 % for 10 ms

GENERAL DATA

Parallel mode Up to 4 UPS (central battery possible)

Audible noise 62 – 69 dB(A) dependent on equipment installed and load state

Operating temperature range/ humidity 0 – 40°C / <95 % (without condensation)

Protection IP20

Color RAL 7035

Cable entry Underside

Environmental conditions Free from corrosive air and conductive dust

COMMUNICATION

Display 320 x 240 graphical LCD display

Alarm signals Acoustic and visual

Interfaces Remote signal contact, RS232, 2 x communication slots for SNMP / Modbus / additional relay cards

DIMENSIONS

Dimensions approx. D x W x H (mm) 910 x 520 x 1165 975 x 520 x 1655

Footprint (m²) 0.47 0.51

Weight approx. 139 kg 204 kg

Weight approx. (incl. module) 169 kg 199 kg 229 kg 259 kg 354 kg 384 kg

1) by THDv ≤2 %

AEGPS - Protect 3.M 2.0 - EN - 01/2012 V1 - Due to our policy of continuous development, the data in this document is subject to change without notice.

AEG is a registered trademark used under licence from AB Electrolux.

AEG Power Solutions

Approach your local AEG Power Solutions

representative for further support.

Contact details can be found on:

www.aegps.com

Protect

3.M 2.0

Intelligent

communication

Protect 3.M 2.0 contains a

powerful communications

module that readily supplies

all relevant information

(measurements, alarms

and error messages). All

information is supplied via

an easy to use LCD screen

Large multi-language

LCD screen

Languages supported:

»German

»English

»French

»Spanish

»Portuguese

»Italian

»Turkish

»Russian

»Chinese

Interfaces

»6 integrated remote signal

contacts

»RS232 interface

»Two expansion slots for

additional remote signal

contacts, MODBUS

extension card and SNMP

adapter

Battery Management

Each UPS power module

contains its own battery

charger with intelligent

charging electronics. These

can be adapted to the battery

in use and facilitate the use

of vendor independent

standard batteries.

A temperature compensated

charging curve ensures

an optimum charging

regime. Automatic testing

informs you of the charging

state of charge and when

charging will be complete.

Protect 3.M 2.0

Customer Beneﬁts

Modular concept

»The UPS output can be easily

adapted to any required

performance parameters.

»Rapid expansion by insertion

of new modules at any time

and without additional costs.

»N+1 redundancy module

increases reliability

Low maintenance costs

»Module replacement in

case of failure within the

shortest possible time.

»For multiple UPS devices,

module exchange between

units is possible.

High efﬁciency

»Efficiency of 94% at 35% load

»Better efficiency means less

heat and thus lower running

costs for air conditioning

»Significant reduction

of CO2emissions

Indice

Altri manuali AEG UPS

AEG

AEG Protect C LCD 6000 (S) Manuale utente

AEG

AEG PROTECT C Series Manuale utente

AEG

AEG Protect C 1000 LCD+ Manuale utente

AEG

AEG Protect 1. M Manuale utente

AEG

AEG PROTECT B. 2000 Manuale utente

AEG

AEG 600 KVA Manuale utente

AEG

AEG IST7 Manuale utente

AEG

AEG PROTECT C. 10000 Manuale utente

AEG

AEG Protect A. 1400 Manuale utente

AEG

AEG Protect C.3000 Manuale utente

AEG

AEG Protect D Series Manuale utente

AEG

AEG PROTECT D LCD+ Manuale utente

AEG

AEG Protect alpha 450 Manuale utente

AEG

AEG Protect C.R Manuale utente

AEG

AEG Protect C.1000 Manuale utente

AEG

AEG Protect 2.33 2.0 Manuale utente

AEG

AEG Protect B. 750 PRO Manuale utente

AEG

AEG PROTECT A. 500 Manuale utente

AEG

AEG protect d. 1000 Manuale utente

AEG

AEG Protect A. 1000 Manuale utente

AEG

AEG Protect D Series Manuale utente

AEG

AEG PROTECT 1 LCD Manuale utente

AEG

AEG Protect alpha. 1200 Manuale utente

AEG

AEG PDU 10-1 Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente