AEG 8259 D Manuale utente

825D/8259D

Extractor Hood

Installation and Operating Instructions

Printedonrecycledpaper.

AEG–puttingwordsintoaction.

Contents

Introduction 3

Extractionmode 3

Recirculationmode 4

Electricalconnection for the UK 5

TechnicalDetails 6

Installation 7

Safetywarnings 7

Installation 8

Hood Operation 11

Safetywarningsforuser 12

Maintenanceand care 13

Metalgreasefilter 13

Openingthemetalgreasefilter 13

Carbonfilter 14

Changingthelightbulb 15

Cleaning 16

Accessories 16

Somethingnot working 17

Service& SpareParts 18

Introduction

Extractionmode

●Thehoodissuppliedasanextractorunitandcanalsobeusedasa

filteredfunctionbyfittingactivatedcarbonfilters(availableasan

accessory).

●YouwillneedoriginalAEGactivatedcarbonfiltersforthefiltered

function(seeAccessories).

●Theair isforcedoutthroughahosefitted tothetopofthehood

A. Fig. 1.

●Theoutlethosemusthaveadiameterof120mm(accessory)for

theextractionmode.

●Fittheconnectionringabovethehoodwithtwoscrewsthenfiran

exhaustingpipelongenoughtoreachtheoutside.Fig.1.

●Ifthecookingvapourispassedthroughanoutsidewall,youwill

needanMKZtelescopicwallpipe(withintakeandventilation)E-

Nr.:610899004(120mmØ)fromourrangeofaccessories.

Fig.1

Recirculationmode

●Theairisfilteredthroughanactivatedcarbonfilterandpassed

backintothekitchenthroughthetopoutletductgrids.

●YouwillneedanoriginalAEGKF825activatedcarbonfilterforthe

filteringfunction.(See Accessories).

●Fix the deflector with two screws Ø3,5x6,5. Fig. 2.

Fig.2

ElectricalconnectionfortheUK

Applianceswith2wires

WARNING: DOUBLE INSULATED - DO NOT EARTH

Theappliancemustbeconnectedtofixedwiringwithadouble

poleswitched fusedspuroutletwithorwithoutpilot lamp.

Westronglyrecommendtheappliancetobeconnectedonlybya

qualifiedelectricianwhoisamemberoftheNICEICwhowillcom-

plywiththeIEEandanylocalregulations.

NOTE:

Theterminology“DOUBLEPOLE”meansthatboththeliveandthe

neutralsuppliesareswitchedanddisconnectedatthesametime.

TheterminationslabelledSUPPLYarefortheconnectionforthe

internalhouse wiringandtheterminationslabelledLOADare for

theappliance.

IMPORTANT

The wires of the mains lead supplied with this appliance are

colouredinaccordance withthe followingcode:

Blue-Neutral

Brown-Live

As the colours of the flexible cord of this appliance may not

correspond with the coloured markings identifying the ter-

minalsintheplug,proceed asfollows: Thewire whichiscol-

oured brown must be connected to the terminal which is

marked with the letter L or coloured red.

The wire which is coloured blue must be connected to the

terminalwhich ismarkedwith theletterN orcoloured black.

LOAD

SUPPLY

LOAD

SUPPLY

DP 13A, 250V

BLUE

(NEUTRAL) BROWN

(LIVE)

FUSE ON

TechnicalDetails

Dimensions(825D):

HeightxWidthx Depht (in cm) 84-117 x59,9x51.5

Dimensions(8259D):

HeightxWidthx Depht (in cm) 84-117 x89,9x51.5

Weight(825D):

Net: 10,7kg

Gross: 16,2kg

Weight(8259D):

Net: 13,1kg

Gross: 19,6kg

Maximumabsorbedpower: 250W

Motorabsorption: 1x170W

Lighting: 2 x 40 W

Lengthofthecable: 100cm

Fanpowers(speed),speedincompliancewithDIN44971

Extractorversion:

1 179m3/h

2 219m3/h

3 336m3/h

Filterversion:

1 102m3/h

2 150m3/h

3 252m3/h

Flange:120mmØ

Installation

Safetywarningsforkitchenunitinstaller

●Whenusedasanextractorunit,thehoodmustbefittedwitha

120mmdiameterhose.

●Ifthefumesmustbeforcedoutthroughthewall,youmustobtain

aMKZsizablewallexhaustpipe(withexternalexhaustandair

intake),E-Nr.-610899004(Ø120mm)whichisoneofour

optionalparts.

●Wheninstalling the hood, makesure you respect thefollow-

ingminimum distance from thetop edge of thecooking

hob/ringsurfaces:

Electric hob 600 mm

Gas hob 650 mm

Electriccooker 685 mm

Gascooker 787 mm

●The cooker hood must not be installed above a cooker with a

high level grill.

●Theairoutletmustnotbeconnectedtochimneyfluesorcombus-

tiongasducts.Theairoutletmustundernocircumstancesbe

connectedtoventilationductsforroomsinwhichfuel-burning

appliancesareinstalled.

●Itisadvisabletoapplyforauthorizationfromtherelevant

controllingauthoritywhenconnectingtheoutlettoanunused

chimneyflueorcombustiongasduct.

Theairoutletinstallationmustcomplywiththeregulationslaid

downbytherelevantauthorities.

●Whentheunitisusedinitsextractorversion,asufficientlylarge

ventilationholemustbeprovided,withdimensionsthatare

approximatelythesameastheoutlethole.

●Nationalandregionalbuildingregulationsimposeanumberof

restrictionsonusinghoodsandfuel-burningappliancesconnected

toachimney,suchascoaloroilroom-heatersandgasfires,inthe

sameroom.

●Regulations on fuel-burning systems specify a maximum

depression of 0.04 bar in such rooms.

●Hoodscanonlybeusedsafelywithappliancesconnectedtoa

chimneyiftheroomand/orflat(air/environmentcombination)is

ventilatedfromoutsideusingasuitableventilationholeapproxi-

mately500-600cm2 toavoidthepossibilityofadepressionbeing

createdduringoperationofthehood.

Ifyouhaveanydoubts,contacttherelevantcontrollingauthority

orbuildinginspector’soffice.

●Sincetheruleforroomswithfuelburningappliancesis“outlethole

ofthesamesizeastheventilationhole”,aholeof500-600cm2,

whichistosayalargerhole,couldreducetheperformanceofthe

extractorhood.

●Ifthehoodisusedinitsfilteringfunction,itwilloperatesimplyand

safelyintheaboveconditionswithouttheneedforanyofthe

aforementionedmeasures.

●Whenthehoodisusedinitsextractorfunction,thefollowingrules

mustbefollowedtoobtainoptimaloperation:

—shortandstraightoutlethose

—keepbendsinoutlethosetoaminimum

—neverinstallthehoseswithanacuteangle,theymust

alwaysfollowagentlecurveonly

—keepthehoseaslargeaspossible(120mmØmin.).

●Failuretoobservethesebasicruleswilldrasticallyreducethe

performance and increase the noise levels of the extractor

hood.

●Where flexible ducting is fitted the length should be no more

than:

— 3 metres with one 90° bend

— 2 metres with two 90° bends.

Bends of more than 90° will reduce the efficiency of the hood

and reduce the air flow.

Installation- Fig.3

●●

●Put the template onto the wall (1) and drill two Ø12mm holes

(2).

●●

●Fit two hooks (3) on the drilled holes.

●●

●Hang the hood on the hooks and adjust the position of the

hood using the two screws on the bottom of the hooks (5).

●●

●Remove the metal filters (4) and mark two points (6).

Remove the hood and drill two Ø8mm holes on the marked

points.

Fit two Ø8mm wall dowels (7), Hang again the hood and fix

the hood definitively with two screws 5X45 (8).

●●

●Fix the chimney support (10) with two screws 5 x 45 mm (9)

and two wall dowels (11) on the wall close to the ceiling.

●●

●For exhausting version: Fit the connection ring (S) on the

top of the hood with two screws Ø 3,5 x 6,5 mm (12S) then

fit an exhausting pipe long enough to reach the outside

(13S).

For recycling version: Fix definitively the deflector (13K)

on the top of the hood with two screws Ø 3,5 x 6,5 mm

(12K).

●●

●Prepare the electric connection (14) (see relative chapter).

●●

●Fit the chimney (15) and fix it on the chimney support with

two screws 3,0 x 9 mm (16).

The lower part of the chimney must be slided down and

inserted on the housing on the upper part of the hood (18).

●●

●Fit the two grids (17) on both sides of the chimney.

Fig.3

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Cappa di ventilazione popolari di altre marche

emmeti

emmeti RECUPA MED A-140 Guida

Nibe

Nibe F135 Manuale utente

Kuppersberg

Kuppersberg INTRO 60 Istruzioni di installazione e manutenzione

Zephyr

Zephyr Spruce AK9834BS Guida all'installazione

Hisense

Hisense MH6INBG Manuale utente

Miele

Miele DA 1255 Manuale utente

Broan

Broan 46000 Manuale utente

GE Profile PV977 Istruzioni originali

FALMEC

FALMEC FFRIA24W5FS Manuale utente

Whirlpool

Whirlpool RH2600XL-1 SERIES Manuale utente

Küppersbusch

Küppersbusch DX ISLA Manuale utente

ETNA

ETNA AV360RVS Manuale utente

JUNO

JUNO JDF603E6 Manuale utente

Miele

Miele DA 6708 D Manuale utente

Tricity Bendix

Tricity Bendix LE 150 Manuale

Smeg

Smeg KSEV97X Manuale utente

Nibe

Nibe S Series Guida utente

Caple

Caple CCH100 Manuale