AerAtron FR3 Series Istruzioni per l'installazione e il funzionamento
ATTENTION ELECTRICIANS
FR3 CEILING FAN
available in: 43”/1092mm 50”/1270mm 60”/1524mm
WARNING:
USER MANUAL & INSTALLATION GUIDE
!
Important information - Please read before attempting installation
1
1. Please read these instructions carefully, be mindful of all warnings and safety information
shown throughout this manual. Should you have any questions please call your local agent.
2. Please review the accompanying assembly diagrams before attempting installation.
3. This fan MUST be installed by a licensed & qualified electrician according to local authority
regulations and in accordance with current wiring rules of the country/state.
4. A copy of the purchasing receipt and proof of installation by a licensed and qualified electrician
according to local authority regulations is required for all warranty claims.
5. Where special access equipment is required to service the fan in accordance with local
authority regulations all associated costs are the responsibility of the owner.
6. Should a warranty claim be required, we reserve the right to charge a service fee for all call
outs where the fan is found not to be defective and / or where access is not provided.
7. To enable future programming, maintenance, cleaning and troubleshooting an isolation switch
per fan is highly recommended. Without an isolation switch per fan, an electrician maybe
required to assist with programming, maintenance, cleaning and troubleshooting. All
associated costs are the responsibility of the owner.
8. A Maximum of 8 fans on each RCD / circuit is recommended. The fans are a Class 5 Device
with leakage to Earth.
9. Your warranty will be void if a solid state dimmer or any other brand of wall controller is used.
10. The means for mains power disconnection must be incorporated in the fixed wiring in
accordance with national wiring rules.
11. To avoid possible electric shock during installation, be sure electricity is turned off at the main
power box before commencing work. Disconnect power by removing fuse or turning off circuit
breaker before installing the fan. Ensure all spliced connections are adequately insulated.
12. Warning! Do not allow the rotating fan blades to come into contact with any object, this can
cause serious injury or death.
13. Damage caused by incorrect installation, Force-majeure, lightning, electrical surges & spikes,
exposure to water, pests or moisture is not covered under warranty.
14. This appliance is not intended for use by persons (including children) with reduced physical,
their safety.
Australia, New Zealand: In accordance with AS/NZS60355-1 & ASNZS60355-2-80: “This
appliance is not intended for use by persons (including children) with reduced physical, sensory
safety. Children should be supervised to ensure that they do not play with the appliance.”
This fan must be installed by a licensed and qualified
electrician according to local authority regulaons.
Contents
Contents................................................................................................................................................... 2
Unpacking your Fan ................................................................................................................................. 3
Installing your Fan .................................................................................................................................... 4
Option A - LED Light Kit ......................................................................................................................... 10
Option B - Ceiling Extension Kit ............................................................................................................ 10
Option C - Raked Ceiling Kit .................................................................................................................. 11
Technical Specification .......................................................................................................................... 12
Care and Cleaning.................................................................................................................................. 13
Troubleshooting ..................................................................................................................................... 13
If the fan is noisy................................................................................................................................. 13
If the fan rotates but does not create much airflow............................................................................ 13
General Information................................................................................................................................ 14
Normal Wear and Tear........................................................................................................................ 14
Ceiling Fan Warranty .............................................................................................................................. 14
Transfer of Warranty ........................................................................................................................... 15
The following is NOT covered by warranty......................................................................................... 15
2
Aeratron ceiling fan warranty details ...................................................................................................... 16
IMPORTANT
assistance before leaving the site.
Important Information............................................................................................................................... 1
3
Unpacking your fan
NOTE:
Unpack your fan and examine all parts, you should have the following:
CEILING SPACER x 2
HANGER BRACKET
MOTOR ASSEMBLY
CONTROL RECEIVER
MOTOR HOUSING
50” FAN BLADE
X3
43”FAN BLADE
X3 OR 60”FAN BLADE
X3
OR
REMOTE CONTROL
HUB UPPER
HUB LOWER
AAA BATTERIES x2
OR
TIMBER SCREWS X 2
PIVOT LOCK X1
HUB SCREWS X 10
MACHINE SCREWS X 2
WASHER X 2 WASHER X 2
STEP 1 Mounting Hanger Bracket to Ceiling
supply at the main power box. Disconnect power
by removing fuse or turning off circuit breaker.
!
hanger
provided. Ensure ceiling joists are sound and of adequate size and strength to support a 35Kg (77lbs) load. If a
between two beams.Proper care must be
and stronger screws.
Ceiling Joist
OPTION A: OPTION B:
Embedded
STEP 2 Connecting Mains Power to Terminal Block
TO RECEIVER
GREEN
BROWN L
FROM HOUSE
(mains Power)
BLUE N
4
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT.
NEUTRAL
LIVE
GROUND
N
L
!
Inserting an otor into Hanger Bracket
=
Bracket Ensure that lug on Hanger
Ball
STEP 4
is engaged in slot in suspension
Installing Receiver into Hanger Bracket
5
STEP 3
Learn Switch
Switch to “O” to pair receiver with the Remote control and
Switch to “X” to lock the pairing code with the Remote control
Slide Remote Control Receiver
into Hanger Bracket from the
opposite side of the Terminal block
in the orientaon as shown below.
XO
6
Connecting the Receiver
2PIN LED driver connection
3PIN
Aerial
1. Connect the
between DC Motor and Receiver.
2. Connect the 3PIN connector between
Mains Power and Reciever.
3PIN Mains Power
to Receiver
Aerial
3PIN Receiver to Motor
Fix Remote Control
Aerial to ceiling
within circle of Fan
Motor Housing
Housing perimeter
STEP 5
4PIN Receiver to Comms
(optional USE ONLY IF INSTRUCTED)
Earth Cable
3PIN
& Earth cable connector
(optional for LED Light)
7
Pairing is always required during setup.
Note: “Learn” switch on receiver (STEP 4)
STEP 6
Controlling the Fan
2.
One remote control can control up to 8 fans (within a 7m (23”) radius).On ALL receivers verify that the
“Learn” switch is in the “O” posion. Switch on the mains power to acvate ALL receivers at the same me,
indicated by one ‘beep’. Within 60 seconds, press and hold the LEARN buon on the remote control (min. 3
seconds) unl fan receiver issues three ‘beeps’.
Speed Up/Down - 1-6 Speed
Use forward mode (clockwise) for cooling.
warm air.
. (LIGHT SWITCH
!
1
4
53
2
Pairing per Remote Control.
O LIGHT DIMMING
‘LEARN’ BUTTONLIGHT SWITCH
| LIGHT ON/OFF
Pairing the Remote Control
1. On Receiver: Verify that the “Learn” switch is in the “O” posion
2. Slide baery cover to unlock - Locate the LEARN BUTTON &
insert baeries.
3. Switch on the main power to acvate the receiver, indicated
by one beep. (Energise one fan reciever at a ame).
4. Within 60 seconds aer the power is turned on (one beep),
press and hold the LEARN buon on the Remote Control
(min. 3 secs.) unl Fan Receiver issues three ‘beeps’ which
indicates successful pairing.
5. On Receiver: switch the “Learn” switch to “X” (this will
lock the pairing code with the remote)
6. Finish STEP 7, 8 & 9 and press ON/SPEED buon to test
fan funcons.
7. To re-pair, repeat steps 3 to 5
NOTE: Power must be off for 10 seconds min. before repairing.
Pairing a Single Fan per remote control: LEARN MODE
The Remote Control and Fan Receiver will memorise the pairing
code for future use even if mains power is switched off.
LIGHT SWITCH: Select ON/OFF or DIMMING for the light funcon.
(Light will maintain last seng if turned off)
8
STEP 7 Attaching the Fan Motor Housing
Align the 3 tabs with the 3 holes on the
Housing and move upwards. Push tabs
inwards slightly before sliding upwards
STEP 8 Assembling the Fan Blades
A B
Place the Hub Upper onto a clean working area.
with the 2 holes in the Hub Upper.
screws for each Blade.
be used.
CLICK!
!
avoid damaging the fan/surface
C
Lock Screw
9
Attaching the Fan Blades
44
STEP Assembling the Fan Blades cont.
C D
Fasten the the Hub Lower from the top side
using the 3 Hub Screws.
Lower) into the recess. With care, turn the fan
over.
No liability is accepted if the Silicone ring is
removed or the Pivot Lock is installed
!
the clearance ‘X’ between
the ceiling and motor
housing is equal all way
round.
Align
Connector and slide fan
blades onto Drive Sha.
D
Hold/push up Fan Blades
and insert Pivot Lock,
sideways. Push Pivot Lock
Tighten Lock Screw
securely using screw driver.
Do not use power tools.
x
A
Pivot Connector
Silicone Ring
B
Pivot Lock
Silicone Ring
Light Hub Lower
(OPTIONAL)
STEP 9
8
Altri manuali per FR3 Series
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali AerAtron Fan
AerAtron
AerAtron AE2+ Series Istruzioni per l'installazione e il funzionamento
AerAtron
AerAtron AE+2 Series Manuale utente
AerAtron
AerAtron E502 Manuale utente
AerAtron
AerAtron AE2 Manuale utente
AerAtron
AerAtron FR3 Series Istruzioni per l'installazione e il funzionamento
AerAtron
AerAtron Ceiling Extension Manuale utente
