AETEK D51-084-30 Manuale utente
P/N:A625012300G
1. Install the converter in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the converter are not blocked.
Single-mode): 9/125um ,1310nm.
4. DC input (48~57VDC or 12~56VDC). Follow the printed polarity for V+, V-, and Ground.
5. Digital output (relay): ON/OFF, support 24VDC/1A. Digital input: level 0(Low), level 1(High).
L2 Gigabit PoE Switches
Quick Installation Guide
The D51 series is a 4/8 port 10/100/1000BaseT at PoE/ bt PoE switch capable of feeding 15.4/30W or 15.4/30//60/90W
(54Vmax. per port) power to Power over Ethernet (PoE) devices. It comes with another 2x GbE TP port + 2xGbE SFP port or
4xGbE SFP port.
IMPORTANT:
INTRODUCTION
CONNECTION
* 1x PoE switch * 1x Quick Installation Guide * 1x 4-pin terminal block
* 2x 2-pin terminal block
* 1x DB9F-RJ45 console cable * 1x DIN rail bracket
PACKAGE CONTENTS
1. Pull out the 4-pin terminal block.
2. Connect power wires to V+, and V-.
4. install the 4-pin terminal block.
Model Description
D51-044-30 4xGbE 30W PoE+2xGbE SFP+2xGbE RJ45
48-56 VDC Input
D51-044-90 4xGbE 90W bt PoE+2xGbE SFP+2xGbE RJ45
48-56 VDC Input
D51-084-30 8xGbE 30W PoE+4xGbE SFP
48-56 VDC Input
Model Description
D51-044-30-DC 4xGbE 30W PoE+2xGbE SFP+2xGbE RJ45
12-56 VDC Input
D51-044-90-DC 4xGbE 90W bt PoE+2xGbE SFP+2xGbE RJ45
12-56 VDC Input
D51-084-30-DC 8xGbE 30W PoE+4xGbE SFP
12-56 VDC Input
D51-044-30 D51-044-90 D51-084-30
D51-044-30-DC D51-044-90-DC D51-084-30-DC
10/100/1000
PoE RJ45 ports
100/1000
SFP ports
Digital input
Digital output relay
Console port
10/100/1000
PoE RJ45 ports
100/1000
SFP ports
10/100/1000
RJ45 ports
100/1000
SFP ports
10/100/1000
RJ45 ports
10/100/1000
PoE RJ45 ports
Console port
Console port
Power1 LED
Power2 LED
48~56VDC Input
DO LED
Reset button
Digital input
Digital output relay
Digital input
Digital output relay
Power1 LED
Power2 LED
48~56VDC Input
DO LED
Reset button
Power1 LED
Power2 LED
48~56VDC Input
DO LED
Reset button
10/100/1000
PoE RJ45 ports
100/1000
SFP ports
Console port Digital input
Digital output
relay
Power1 LED
Power2 LED
12~56VDC Input
DO LED
Reset button
10/100/1000
PoE RJ45 ports
100/1000
SFP ports
Console port Digital input
Digital output
relay
Power1 LED
Power2 LED
12~56VDC Input
DO LED
Reset button
10/100/1000
PoE RJ45 ports
100/1000
SFP ports
Console port Digital input
Digital output
relay
Power1 LED
Power2 LED
12~56VDC Input
DO LED
Reset button
AETEK INC.
10F, No.168, Lien-Cheng Rd., Chung-Ho, New TaipeiCity, 235, Taiwan, R.O.C.
|T:+886-2-82452822|W:www.aetektec.com|E:[email protected]om
Copyright © 2022 AETEK INC. All rights reserved.
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
User Name
Password
DEFAULTS
Power LEDs
LED Color State Description
Power1 Green On Powered on correctly.
Off Not receiving power from power1.
Power2 Green On Powered on correctly.
Off Not receiving power from power1.
DO LED
LED Color State Description
System Yellow On DO ON
Off DO OFF
Baud rate 115200
Stop bits 1
Data bits 8
Parity N
Flow control none
Console Port Defaults
Port Status LEDs
LED Color State Description
RJ45 Ports
Up (PoE)
Amber On The port is enabled and supplying power to connected device.
- Off The port has no active connection, or it is not connected to a PoE PD device. Otherwise, the port may
have been disabled through the switch user interface.
RJ45 Ports
Down (LAN)
Green On The port is enabled and established a link to connected device.
- Off The port has no active network connection, or it has no established link to connected device.
Otherwise, the port may have been disabled through the switch user interface.
SFP Ports Green On The port is enabled and supplying power to connected device.
Green Blinking
Green Blinking
The port is transmitting/receiving packets.
The port is transmitting/receiving packets.
- Off The port has no active network connection, or it has no established link to connected device.
Otherwise, the port may have been disabled through the switch user interface.
Reset button
Task Method SYS LED Behavior Port Status LED Behavior
Reset Press 2 ~ 7 seconds Blinking Green All LEDs Off.
Restore Defaults Press 7 ~ 12 seconds Blinking Green All LEDS On.
DIN Rail Installation
admin
admin
Questo manuale è adatto per i seguenti modelli
5
Altri manuali AETEK Interruttore
AETEK
AETEK H40-022-90-120 Manuale utente
AETEK
AETEK C70-00A-01 Manuale utente
AETEK
AETEK H21-041-30-075 Manuale utente
AETEK
AETEK H70-044-60 Manuale utente
AETEK
AETEK H70-044-30 Manuale utente
AETEK
AETEK H60-022-91-120-A Manuale utente
AETEK
AETEK C11-082-31-120 Manuale utente
AETEK
AETEK H21-082-30-150 Manuale utente
AETEK
AETEK H60-044-30-150 Manuale utente
AETEK
AETEK D60-044-30 Manuale utente
AETEK
AETEK H40-044-30-150-V3 Manuale utente
AETEK
AETEK D51-044-90 Manuale utente
AETEK
AETEK H21-041-30-120 Manuale utente
AETEK
AETEK H21-041-30-075 Manuale utente
AETEK
AETEK H60-044-30-150 Manuale utente
AETEK
AETEK H21-082-31-150 Manuale utente
AETEK
AETEK C11-242-30-380 Manuale utente
AETEK
AETEK H70-084-30 Manuale utente
AETEK
AETEK D60-044-90 Manuale utente
AETEK
AETEK H21-082-31-150 Manuale utente
