AFe Power Advanced FLOW engineering Manuale utente

®

advanced FLOW engineering

Instruction Manual P/N: 77-43018

Make: Ford Model: F-150 Year: 2011-2014 Engine: V6-3.5L (tt) EcoBoost

®

Label Qty. Description Part Number

A 1 Module R77-43018

B 1 LED Switch 05-70013

C 2 Velcro (2 Inches) 05-01244

D 4 Cable Ties 05-60167

Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public

streets or highways is strictly prohibited in California and others states that have adopted California

emission regulations.

• Please read the entire instruction manual before proceeding.

• Ensure all components listed are present.

• If you are missing any of the components, call customer support at 951-493-7100.

• Ensure you have all necessary tools before proceeding.

• Do not attempt to work on your vehicle when the engine is hot.

• Disconnect the negative battery terminal before proceeding.

• Retain factory parts for future use.

Page 2

aFepower.com

Page 3

A

B

C

D

®

Refer to Figure A for Step 1.

Step 1: Before installing the aFe POWER Module you must place your vehicles ECU in sleep mode. In

order to place your vehicles ECU in sleep mode you will need to do the following:

-If the engine is cold, open the hood, close the doors, lock the car and wait 30 seconds.

-If the engine is warm, open the hood, close the doors, lock the car and wait 20 minutes.

-If the engine is warm and you can’t wait 20 minutes, disconnect the battery.

NOTE: Do NOT open the doors or start the vehicle when one of the sensor is disconnected.

REMOVAL

Page 4

Figure A

Refer to Figure B for Steps 2-3.

Step 2: Remove engine cover to gain access to the MAP sensor.

Step 3: Locate the MAP and TMAP sensor. The MAP sensor is located on the back of the intake

manifold towards the ﬁrewall. The TMAP sensor is located on the charge intake tube just before

the throttle body.

Figure B

Page 5

REMOVAL

MAP

TMAP

®

Refer to Figures C for Steps 4-5.

Step 4: Locate and disconnect the MAP sensor connector, by pressing down on the locking tab of the

connector, and sliding it out of the sensor.

Step 5: Locate the MAP sensor jumper harness on the aFe module. This is the shorter harness. Plug the

female connector of the module to the stock MAP sensor, then take the male connector of the

module and connect to the female connector of the engine harness.

Figure C

Page 6

INSTALL

aFepower.com

Page 7

Refer to Figure D for Step 6.

Step 6: Check with the pictures to make sure the connectors are correctly connected.

Note: Make sure connections are fully engaged. Usually, connectors make a snapping sound

when fully engaged.

Figure D

INSTALL

®

Page 8

Refer to Figure E for Steps 7-8.

Step 7: Locate and disconnect the TMAP sensor connector, by pressing down on the locking tab of the

connector, and sliding it out of the sensor.

Step 8: Locate the TMAP sensor jumper harness on the aFe module. This is the longer harness. Plug the

female connector of the module into the stock TMAP sensor, then the male connector of the

module into female connector of the engine harness.

Figure E

INSTALL

Page 9

Refer to Figure F for Step 9.

Step 9: Check with the pictures to make sure the connectors are correctly connected.

Note: Make sure connections are fully engaged. Usually, connectors make a snapping sound

when fully engaged.

Figure F

INSTALL

®

Page 10

Refer to Figure G for Steps 10-11.

Step 10: Carefully route the switch cable behind steering wheel cover.

Step 11: Mount the Switch on an open, ﬂat surface.

Figure G

INSTALL

Altri manuali per advanced FLOW engineering

1

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali aFe Power Accessori per automobili

aFe Power

aFe Power 77-46306 Manuale utente

aFe Power

aFe Power 54-10468 Manuale utente

aFe Power

aFe Power SCORPION 79-21003L Manuale utente

aFe Power

aFe Power MOMENTUM GT 50-70034S Manuale utente

aFe Power

aFe Power 77-86318 Manuale utente

aFe Power

aFe Power SCORPION 79-21004L Manuale utente

aFe Power

aFe Power F1-03003 Manuale utente

aFe Power

aFe Power 46-71110A Manuale utente

aFe Power

aFe Power Magnum FORCE Manuale utente

aFe Power

aFe Power 51-82722 Manuale utente

aFe Power

aFe Power 50-70007D Manuale utente

aFe Power

aFe Power 46-70022 Manuale utente

aFe Power

aFe Power dfs780 Manuale utente

aFe Power

aFe Power advanced FLO engineering Manuale utente

aFe Power

aFe Power 46-70270 Manuale utente

aFe Power

aFe Power 56-70058D Manuale utente

aFe Power

aFe Power SCORCHER GT 77-47004 Manuale utente

aFe Power

aFe Power 50-70009S Manuale utente

aFe Power

aFe Power 77-83028 Manuale utente

aFe Power

aFe Power Magnum FORCE 54-13035D Manuale utente

aFe Power

aFe Power QUANTUM 53-10005D Manuale utente

aFe Power

aFe Power 440-401006-N Manuale utente

aFe Power

aFe Power 77-83046 Manuale utente

aFe Power

aFe Power advanced FLOW engineering Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente