AGFEO DECT 35 Manuale utente

User Guide

System DECT 35

System Phone

About this User Guide

This user manual is intended for the telephone system with the firmware installed at the time of

shipment. As the DECT35 Cordless System Phone is controlled from the telephone system certain

features described in this manual may no longer apply if the system firmware is changed.

This manual contains user instructions for the DECT 35 Cordless System Phone and a brief

reference regarding the system features. A detailed description of features relating to the telephone

system can be found in the user guide of the telephone system.

The AGFEO DECT 35 Cordless System Phone is designed for the connection / registration to an

AGFEO DECT S0 Base or an AGFEO DECT S0-Base plus.

The AGFEO DECT 35 will be supported by all AGFEO Telephone Systems from a firmware 8.0 and a

DECT firmware from 2.6.

AGFEO GmbH & Co. KG will not accept any liablility whatsoever for any damages which may have

been caused by improper use of the DECT 35 Cordless System Phone.

User Instructions

Cordless System Phone

DECT 35

User Instructions .................................................................................................................................. 2

About this User Guide ........................................................................................................................... 2

Table of Contents ................................................................................................................................... 3

Contents: ............................................................................................................................................... 4

Charging the Battery Pack .................................................................................................................... 4

DECT 35 Handset ................................................................................................................................... 5

Buttons of the DECT 35 Cordless Phone .............................................................................................. 6

DECT 35 Display ..................................................................................................................................... 7

Status Display ........................................................................................................................................ 7

Display Features Enabled ...................................................................................................................... 7

Switch Handset ON / OFF .................................................................................................................... 8

Keypad Lock ........................................................................................................................................... 8

Ringer On/Off ........................................................................................................................................ 8

DECT 35 Settings ................................................................................................................................... 9

Phone Settings ...................................................................................................................................... 9

Set Ringer of DECT 35 ......................................................................................................................... 10

Select Display Language ...................................................................................................................... 10

Register Handset To Base Unit ............................................................................................................ 11

Delete Registration .............................................................................................................................. 12

Delete Registration in Telephone System ........................................................................................... 12

Delete Registration in DECT 35 Handset ............................................................................................. 12

Function Button Assignment .............................................................................................................. 13

Function Button Programming .......................................................................................................... 13

Making Calls ........................................................................................................................................ 13

Exchange Line Seizure „Direct“......................................................................................................... 13

Exchange Line Seizure with „9“ (0) .................................................................................................... 14

Call Log ................................................................................................................................................ 14

Storing Displayed Numbers in Phone Book ........................................................................................ 15

Storing Numbers in Phone Book ........................................................................................................ 15

Calling Stored Number (or Delete) ...................................................................................................... 15

Phone Book ......................................................................................................................................... 15

Cleaning ............................................................................................................................................... 16

Accessories / Range ............................................................................................................................ 16

Rechargeable Battery .......................................................................................................................... 16

Battery Replacement ........................................................................................................................... 16

Replacing Battery ................................................................................................................................ 17

Declaration of Conformity ................................................................................................................... 18

Table of Contents

Cordless System Phone

DECT 35

Contents:

Charging the Battery Pack

1 DECT 35 Cordless Handset

1 Rechargeable Battery Pack

1 Charging Cradle with Plug In Power Supply

1 User Manual

NOTE: The supplied battery has not been charged.

To charge the battery insert the handset in the charging cradle of the DECT 35. The charging status

will be shown in the display of the phone. However, the display may remain without any indication

for a few minutes if the battery will be charged for the first time. The handset will sound a beep

once the battery has been fully charged.

- NOTE: The first initial charge should be carried out for at least 16 hours - regardless of the

charging status display.

- After the initial charge you may return the handset into the charging cradle after each call. The

charging of the battery is electronically controlled to guarantee an optimal and gentle charging

process.

- The battery may get warm during charging.

An even longer battery life can be achieved if you discharge the battery completely every so often. To

discharge the battery, leave the handset switched on until this will switch off by itself.

Cordless System Phone

DECT 35

DECT 35 Handset

CLR

AGFEO

ALT

ABC

DEF

JKL

GHI

MNO

PQRS

TUV

WXYZ

Volume Control

Earpiece

LED Indicator

Browse

Last Number Redial

Stop

Programming

Illuminated Display

Browse

Phone Book

Confirmation

Call Log / Set Features

2nd Level

Recall

Delete

Keypad Lock

Headset Connection Microphone

Ringer Off

Mute (not used)

Keypad / Characters

programmable Buttons

DECT 35

Initiate or End Call

Cordless System Phone

DECT 35

Buttons of the DECT 35 Cordless Phone

1...0

N L

I J

Keypad - to dial or enter data

Arrow Buttons - To browse through the

display

OK - To confirm entry

Alt - Go to 2nd keypad level and to use

the freely programmable function

buttons.

Recall - Enquiry or Brookers Call.

Answer or End a Call. To Perform or Quit

a function.

Phone Book -Access System or DECT 35

Phone Book.

Messages - View Call Log and

interrogateAnsweringMachine.

Last Number Redial - LNR of AGFEO

System and or of the DECT 35 handset.

Programming of telephone system

internal functions and DECT 35

internalfunctions.

Keypad Lock

Without any Function

Switch off tone ringer. Incoming calls

will be signalled visually or by vibration

alarm.

Clear / Delete entry.

Cordless System Phone

DECT 35

BRI ISDN trunk line. One line (one B-Channel) is in use. On incoming call X will be flashing.

BRI ISDN trunk line. Both channels are in use.

ISDN Extension. One line (one B-Channel) is in use.

ISDN Extension. Both channels of the line are in use.

Both B-channels of the ISDN – lines are available. (Extension or BRI trunk line)

Extension number, Static: Extension is busy, Flashing: Extension is ringing.

DECT 35 Display

Status Display

Display Features Enabled

Call Waiting ON

Do Not Disturb (DND) ON

Diversion / ISDN-Diversion ON.

Call Forwarding / Alternative Extension ON

Night Service

Appointment Reminder ON.

Wake Up Call ON

CallLog

Answering Machine (AGFEO A-Module 30 only)

Sensorenabled

To display features enabled, press the ALT buttone once.

DECT 35 is off hook / has radio contact with telephone system

Browse through menu

Calls are listed in Call Log

DECT 35 is within range of base station

Pressing ALT

Displays the features enabled

active WRL

StatusofS0connections

Statusofextensions

Cordless System Phone

DECT 35

Switch Handset ON / OFF

Switch to ON:

Press the handset button for 1 second

Switch OFF:

Press the Hbutton for 3 seconds

The DECT 35 will switch ON after the battery is

connected and the handset is inserted into the

chargingcradle.

Enable the keypad lock:

Press the Nbutton for 2 second

Disablethe keypad lock

Press the Nbutton for 2 seconds

Pressing any button will have no function when

the keypad is locked.

To answer a call press the „Handset Button“, the

keypad lock is automatically disabled during a call.

RingerOn/Off

Switch the ringer off:

Press the Lbutton for 2 second

Switch the ringer back to on:

Press the Lbutton for 2 second

If the tone ringer is switched off then incoming

calls will be indicated visually and where

applicablebyvibrationalarm.

KeypadLock

N O

N O2 sec.

D O

HO3 sec.

1 sec.

2 sec.

L O

L O2 sec.

2 sec.

Cordless System Phone

DECT 35

DECT 35 Settings

To enter the DECT 35 settings menu, press and hold the button „Set“ for longer than one second.

Two different settings can be carried out within the menu Profile. Each of these profiles offer the

following settings:

- Ringer volume: Here you may set the required ringer volume.

- Key Click: You may set if you hear a click when pressing buttons of the DECT 35.

- Signals: Setting the volume of the handset confirmation/warning tones.

- Vibrator: Will set the vibration alarm to on or off.

- Auto-Answer: This will set the auto answer function for the DECT 35. The auto answer function is

useful if you wear a headset and wish to answer every call without the need to press a button on

the handset.

- Charger: Here you can set if an incoming call should automatically be answered when the

handset is removed from the charging cradle.

- Earpiece Vol: The volume of the handset can be set in 5 steps.

- Range Alarm: You may set if the handset should give an alarm if it goes outside the range of the

DECT base station.

- Backlight: The backlit display can be switched on or off here.

- Keylock: You can set if the keypad lock will be manually enabled or lock automatically after 60

seconds.

The display language on the DECT 35 can be set from the menu Language.

The menu Ringer offers the setting of the 10 various ringing patterns (Calls Incoming/Setup

Incoming Ringing Patterns in TK-Suite) which have been set in the telephone system. Due to this

extension -, doorphone - and incoming calls are easily recognisable by the ringing pattern set.

The menu Phonebook offers the following selection:

- dial telephone numbers from the phone book of the DECT 35,

- store new phone book entries,

- delete phone book entries.

The menu Base Station offers the selection of:

- selection between 10 memory locations of base stations,

- register your cordless handset to another base station,

- delete a base station entry from your handset.

In the menu Service you will be able to display:

- the metering mode of your cordless phone,

- display the firmware version of your DECT 35 cordless phone.

Phone Settings

Press and hold down the button „Set“.

Select the setting „Set-Up Profile“.

Confirm with H.

Using the arrow buttons select the profile for

which you want to change the setting.

Confirm with H.

You now can select the above described features.

With Hyou can select the required menu, you

may change the settings by using the arrow

buttons.

The new setting will be activated by pressing H.

To exit the phone setting menu press the „Set“

button briefly .

IJH

2 sec.

Cordless System Phone

DECT 35

Set Ringer of DECT 35

SelectDisplayLanguage

Press and hold the „Set“ button.

Using the arrow buttons select the menu „Rin-

ger“. Confirm with H.

Using the arrow buttons select the ringing pattern

of the telephone system .

Confirm with H.

Select the required ringing pattern and confirm

selection by pressing H.

To exit the phone setting menu press the „Set“

button briefly.

IJH

2 sec.

Press and hold the „Set“ button.

Using the arrow buttons select the menu

„Language“. Confirm with H.

The language set will be displayed. Select the

required language by using the arrow buttons.

Confirm with H.

To exit this setting press the „Set“ button briefly.

In addition you may want to change the language

of the AGFEO Telephone System.

Briefly press the „Set“ button to recall the menu

language.

Select the display language required and confirm

the selection by pressing H.

To exit programming press the „Set“ button

briefly.

IJH

Q20

IJH

2 sec.

Indice

Altri manuali AGFEO Telefono senza fili

AGFEO

AGFEO System DECT 30 Manuale utente

Manuali Telefono senza fili popolari di altre marche

3Com

3Com NBX Manuale utente

Panasonic

Panasonic KX-TGK210HK Manuale utente

Panasonic

Panasonic KX-TCA181EX Manuale utente

BT FREESTYLE 3200 Manuale utente

AT&T

AT&T CL84102 Manuale utente

BREZZICNI

BREZZICNI CL-3622 Manuale utente

Panasonic

Panasonic KX-TG1831NZ Manuale utente

Panasonic

Panasonic KX-TG7301E Manuale utente

Furuno

Furuno FM-4721 Manuale utente

Sanyo

Sanyo CLT-J70 Manuale utente

Amplicomms

Amplicomms BigTel 201 Manuale utente

GE 26992 Manuale utente

AT&T

AT&T E1812B Manuale utente

Sanyo

Sanyo CLT-670 Manuale utente

GE 15432970 Manuale utente

Curtis

Curtis TC595 Manuale utente

Gigaset

Gigaset Gigaset 3000 Micro Manuale utente

Poly

Poly VVX D230 Guida all'installazione