AGFEO System DECT 30 Manuale utente
User Guide
System DECT 30
System Phone
About this User Guide
This user manual is intended for the telephone system with the firmware installed at the time of
shipment. As the DECT30 Cordless System Phone is controlled from the telephone system certain
features described in this manual may no longer apply if the system firmware is changed.
This manual contains user instructions for the DECT 30 Cordless System Phone and a brief
reference regarding the system features. A detailed description of features relating to the telephone
system can be found in the user guide of the telephone system.
The AGFEO DECT 30 Cordless System Phone is designed for the connection / registration to an
AGFEO DECT-Module or AGFEO DECT-SO-Base.
AGFEO GmbH & Co. KG will not accept any liability whatsoever for any damages which may be
caused by improper use of the DECT 30 Cordless System Phone.
User Instruction
System DECT 30
3
User Instruction .................................................................................................................................... 2
About this User Guide ........................................................................................................................... 2
This Pack Contains: .............................................................................................................................. 4
Charging the Battery Pack .................................................................................................................... 4
DECT 30 Handset ................................................................................................................................... 5
Buttons of the DECT 30 Cordless Phone .............................................................................................. 6
DECT 30 Display ..................................................................................................................................... 7
Status Display ........................................................................................................................................ 7
Display of Features Set .......................................................................................................................... 7
Switch Handset ON / OFF .................................................................................................................... 8
Keypad Lock ........................................................................................................................................... 8
Ringer Switch ........................................................................................................................................ 8
Telephone Settings ................................................................................................................................ 9
Register DECT 30 to Base Unit ............................................................................................................ 10
DECT Delete Registration .................................................................................................................... 11
Delete Registration in Telephone System ........................................................................................... 11
Delete Registration in DECT 30 Handset ............................................................................................. 11
Function Buttons- Overview of freely programmable Function Buttons .......................................... 12
Function Button Assignment .............................................................................................................. 14
Store / Change a Function .................................................................................................................. 14
Making Calls ........................................................................................................................................ 14
Exchange Line Seizure „Direct“......................................................................................................... 14
Exchange Line Seizure with „9“......................................................................................................... 15
Call Log ................................................................................................................................................ 15
Store an Entry ...................................................................................................................................... 16
Calling Stored Number (or Delete) ...................................................................................................... 16
Phone Book of the DECT 30 ................................................................................................................ 16
Cleaning the DECT 30 ......................................................................................................................... 17
Accessories /Range ............................................................................................................................. 17
Rechargeable Battery .......................................................................................................................... 17
Battery Replacement ........................................................................................................................... 17
Changing the Battery .......................................................................................................................... 18
Declaration of Conformity ................................................................................................................... 19
Table of Contents
System DECT 30
4
ThisPack Contains:
Charging the Battery Pack
1 System DECT 30 Cordless Handset
1 Rechargeable Battery Pack
1 Charging Cradle with Plug In Power Supply
1 User Manual
NOTE: The supplied battery has not been charged.
To charge the battery insert the handset in the charging cradle of the DECT 30. The charging status
will be shown in the display of the phone. However, the display may remain without any indication
for a few minutes if the battery will be charged for the first time. The handset will sound a beep
once the battery has been fully charged.
- NOTE: The first initial charge should be carried out for at least 16 hours - regardless of the
charging status display.
- After the initial charge you may return the handset into the charging cradle after each call. The
charging of the battery is electronically controlled to guarantee an optimal and gentle charging
process.
- The battery may get warm during charging.
An even longer battery life can be achieved if you discharge the battery completely every so often. To
discharge the battery, leave the handset switched on until this will switch off by itself.
System DECT 30
5
DECT 30 Handset
AGFEO
ABC DEF
JKL
GHI MNO
PQRS TUV WXYZ
Volume Control
Earpiece
LED Indicator
Browse
Last Number Redial
Stop
Programming
Illuminated Display
Browse
Phone Book
Confirmation
Call Log / Set Features
2nd Level
Recall
Delete
Initiate or End Call
Keypad Lock
Headset Connection Microphone
Ringer Off
Mute (not used)
Keypad / Characters
programmable Buttons
CLR
DECT 30
<>
OK
ALT
R
23
1
5
46
789
0
System DECT 30
6
Buttons of the DECT 30 Cordless Phone
1...0
N L
I J
H
A
K
D
B
A B
G
Keypad - to dial or enter data
Arrow Buttons - To browse through the
display
OK - To confirm entry
Alt - To initiate a function within the
telephone system. To go to 2nd keypad
level. To use the freely programmable
function buttons. To switch to Phone
Book.
Recall - Enquiry or Brookers Call.
Answer or End a Call. Quit a function.
Phone Book -Access DECT 30 Phone
Book.
ALT Phone Book - Access phone book of
telephone system. (Central Dialling)
Messages - Currently without function.
ALT Mail - To access Call Log,
Answering Machine and to check
active features in the telephone
system.
Last Number Redial - To use LNR of
the DECT 30 handset.
ALT Last Number Redial - use LNR of
the telephone system.
Programming - To program functions
of the DECT 30 handset.
ALT Programming - To program
functions of the telephone system.
Key - Used to lock keypad.
without function
Bell - Switch off tone ringer. Incoming
calls will be signalled by vibration or
visual in display.
Clear - Delete an entry.
A G
P
A P
Q
A Q
Q M
O
Q E
A C
System DECT 30
7
BRI ISDN trunk line. One line (one B-Channel) is in use. The x will be flashing on an incoming
call.
BRI ISDN trunk line. Both channels of the line are in use.
ISDN Extension line. One line (one B-Channel) is in use.
ISDN Extension line. Both channels of the line are in use.
Both B-channels of the ISDN – line are available. (Extension or BRI trunk line)
Extension, Static: Extension is busy, Flashing: Extension is ringing.
x
X
i
I
-
12
DECT 30 Display
Status Display
Display of Features Set
Call Waiting ON
Do Not Disturb (DND) ON
Diversion / ISDN-Diversion ON.
Call Forwarding / Alternative Extension ON
Night Service
Appointment Reminder ON.
Wake Up Call ON
CallLog
Answering Machine (AGFEO A-Module 30 only)
Sensorenabled
K
R
U
E
N
T
W
L
A
S
To access ALT-Display press ALT button once.
DECT 30 is off hook and has a radio connection to the system
Browse trough menu
DECT 30 is within reach of base station
Status Indication of S0 Connection
Extension Status
ALT-Display
Indicates the features enabled
active WRL
System DECT 30
8
Switch Handset ON / OFF
Switch to ON:
Press the call button for 1 second
Switch OFF:
Press the OK button for 3 seconds
The DECT 30 will switch ON after the battery is
connected and the handset is inserted into the
chargingcradle.
KeypadLock
Enable the keypad lock by pressing the SET Button
follwed by the STAR * button.
Disable the keypad lock by pressing the SET But-
ton follwed by the STAR * button.
Pressing any buttons will have no functions when
the keypad is locked.
To answer a call press the „call button“, the
keypad lock is automatically disabled during a call.
D O
H O
Q N
Q N
1 sec.
1 sec.
Ringer Switch
To switch the ringer off press the SET Button
followed by the #-Button.
To switch the ringer back to on press the SET
Button followed by the #-Button.
Q L
Q L
System DECT 30
9
TelephoneSettings
Press the „Set“ button longer to change the settings of the DECT 30 Cordless System Phone:
Note, two different user profiles can be set in the menu PROFILE SET UP.
Each of the profiles will have the following settings available:
- Tone Ringer: Will set the various ring tones.
- Ringer Volume: 5 Volume settings are available.
- Keypad Click: Here you can set if a click should be heard on pressing a button on the keypad.
- Vibrator: To switch the vibration alarm on or off.
- Auto Answer: Will answer an incoming call automatically. This feature is useful if a headset is
worn by the user and each call wants to be answered without pressing a button.
- Charging Cradle: Will set if a call should be answered if the ringing DECT 30 is lifted out of the
chargingcradle.
- Handset Volume: Here the volume can be set in 5 steps.
- Range: Will set if a warning tone should sound once the handset is out of range of the DECT base
station.
- Illumination: Background illumination of the Display area can be set here.
- Keypad Lock: Will set if the keypad lock should activate automatically after 1 minute.
The menu LOGIN offers following selection:
- 10 DECT Base Stations to be stored and selected,
- to register your DECT 30 to another Base Station,
- to delete Base Stations from your DECT 30 handset.
Telephone Settings
Press the „Set“ button.
Select using the arrow buttons the Menu „Profi-
le“. Confirm the selection with „OK“.
Select by using the arrow buttons the profile to
which the changes should apply. Confirm the
selection with „OK“.
You now can select the above described settings.
The required section is selected by pressing
„OK“, use the arrow buttons to change the
setting.
By pressing „Ok“ the required setting will be
stored.
To leave this programming menu press briefly the
„Set“ button.
Q
IJH
IJH
IJ
H
IJ
H
Q
9
System DECT 30
10
Register DECT 30 to Base Unit
The DECT 30 handset can be registered to a
maximum of 10 Base Units.
Should you only have one base unit, then you may
ignore this point and all other relating infor-
mation regarding the selection of a base unit.
Should you have more than one base unit in use
with your telephone system, then you select the
base unit to which you want to register the DECT
30 handset to. The base unit can be allocated by
use of the Identnumber. (Sticker on module or
indication in display)
First switch your DECT Base to registration mode
as described in the user manual of your DECT
SO-Base or DECT Module.
Press the „Set“ button on the DECT 30.
Using the arrow buttons select the menu LOGIN
and confirm with „OK“.
With the arrow buttons go to the menu
„SUBSCRIPTION CREATE“ and confirm with
„OK“. The DECT 30 will now search for a base
unit which is in registration mode.
Once a base is found, then this will be shown in
the display area. You may select the required base
with the arrow buttons should more than one
base be in registration mode. Confirm selection
by pressing „OK“
Use the arrow buttons select the required
location. Enter the system PIN if so required
(default is 2580) and confirm with OK.
The DECT 30 is now registered to the base unit.
Q
IJ
H
IJ
H
H
H
Indice
Altri manuali AGFEO Telefono senza fili
