Agilent Technologies G8610 Series Guida di riferimento

Agilent Technologies Helium Leak Detector

G8610, G8611, and G8612 Series Quick Reference Card

Manual Number G8610-90000, Rev. C

November 2017

Start Up (Manual Section 1.3.4)

Installation: Do not install or use the pump in an environment exposed

to atmospheric agents (rain, snow, ice), dust, aggressive gases, or in

explosive environments or those with a high fire risk. During operation,

the following environmental conditions must be respected:

•Temperature: from +12 °C to + 45 °C

•Relative humidity: up to 90% (non-condensing)

Plug in power cord, flip switch ON behind unit.

Wait about 7 minutes for "SYSTEM READY."

First time startup will

prompt a wizard to help

select language, units,

date, time, and options.

These may be changed

any time through the

menu screens.

Calibration Set Up (Manual Section 4.1)

•Read Internal Leak -Quick check to see if instrument reads

calibrated leak correctly

•To Calibrate:

1. Select Internal Leak and Full.

2. Tap Calibrate.

3. Tap OK when calibration is complete.

Menu Navigation (Manual Section 1.5)

Calibration

Calibrate with

Internal/External

Leak

External leak to be placed on Test Port or vacuum system.

Internal leak is provided instrument.

Calibrate

Full/Fast

Full Spectrometer Calibration/

Fast Gain Adjustment

Test

Configuration

Set Points

Set Point: Leak Rate, Pressure, Audio

Advanced

Features

High Pressure Test, Fine Test Only,

Auto-Zero < 0, Gross Test, Transfer Points (to Test),

Stabilization Wait Time

Application

Setup

Sniff Method, Spray Method,

High Sensitivity, Auto Sequencer,

Split Flow, PPM Sniff Method

Settings

Main Settings

Date and Time, Units, Languages, Touch, and Sound

Screen Settings

Bar Graph, Range, Analog Output

Remote Control

Remote Setup with Channel Sync

Password and

Restrictions

Restriction Level, Lock Vent Control, Lock All Control

Maintenance

General

Internal Calibrated Leak Setup, Software Update

Manual Tuning

Emission, Ion, Gain Settings

Valve Control

Manually Open and Close Valves

Pump

Inspect Forepump and Exhaust Pump

Gauge

Calibration

Calibrate Thermocouple Gauge to Vacuum or Atmosphere

System Defaults

Set to Factory Defaults

System

Information

System

Information

Software Version, Internal Data

Current Setup

Set Points and Calibration Type

Turn Off

Turbo will brake. Do NOT move leak detector while turbo is

powering down.

Agilent Technologies Helium Leak Detector

G8610, G8611, and G8612 Series Quick Reference Card

You must consult operations manual, p/n G8610-90001, provided with

the leak detector, in order to operate the equipment in a safe manner.

Main Controls (Manual Section 1.5)

•Test -Measure helium leak rate

•Hold -Isolate leak detector from connected vacuum system while keeping both under vacuum

•Zero -Nullify current leak rate reading and establish a new baseline

•Vent -Bring test port to atmospheric pressure

Home Screen Display (Manual Section 1.5 and 3.11)

Application Setup (Manual Section 5.1.3)

Shutdown (Manual Section 1.3.5)

Tap the Power icon and follow the prompts.

Altri manuali per G8610 Series

Questo manuale è adatto per i seguenti modelli

Altri manuali Agilent Technologies Sensore di sicurezza

Agilent Technologies

Agilent Technologies 8480 Series Manuale di servizio

Agilent Technologies

Agilent Technologies G3388A Manuale utente

Agilent Technologies

Agilent Technologies G3485A Manuale utente

Agilent Technologies

Agilent Technologies InfinityLab 1290 Infinity II Manuale utente

Agilent Technologies

Agilent Technologies G8610 Series Manuale utente

Agilent Technologies

Agilent Technologies G6600-90006 Manuale utente

Agilent Technologies

Agilent Technologies VS Series Manuale utente

Agilent Technologies

Agilent Technologies 1260 Infinity Manuale utente

Agilent Technologies

Agilent Technologies 1100 Series Manuale utente

Agilent Technologies

Agilent Technologies 1260 Infinity II Manuale utente

Agilent Technologies

Agilent Technologies 85025A Manuale

Agilent Technologies

Agilent Technologies 8355 Sulfur Manuale utente

Agilent Technologies

Agilent Technologies 85037A Manuale di servizio

Agilent Technologies

Agilent Technologies 1100 Series Manuale utente

Agilent Technologies

Agilent Technologies G3437A Manuale utente

Agilent Technologies

Agilent Technologies 6820 GC Manuale utente

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuale utente

Agilent Technologies

Agilent Technologies NPD Manuale utente

Agilent Technologies

Agilent Technologies 7250 Manuale utente

Agilent Technologies

Agilent Technologies G3388B Manuale di installazione

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuale utente

Agilent Technologies

Agilent Technologies G2621-64000 Manuale utente

Agilent Technologies

Agilent Technologies 1200 Infinity Series Manuale utente

Agilent Technologies

Agilent Technologies VS Series Manuale utente

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Satel

Satel OPAL Pro Manuale utente

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente