AGPtek BA02 Manuale utente
User Manual
English 01-10 | Italiano 11-21
1
Product Overview
TX: Transmitter | RX: Receiver
1. Power Button/Confirm: Long press for 3
seconds to turn on and off; Short press to
confirm.
2. TX/RX Switch; Search: Long press for 5
seconds to switch TX/RX mode; Short press
Type-C
Port
TX/RX Switch; Search
Power Button/Confirm
AUX Plug
Up/
Volume -
Down/
Volume +
2
to search for connected devices.
3. Up/Volume -: Long press 5 seconds to turn
down the volume; Short press to scroll up.
4. Down/Volume +: Long press 5 seconds to
turn up the volume; Short press to scroll
down.
5. AUX Plug: Inserted into PC, TV, game
console (Switch, PS4).
6. Type-C Port: Used as a charging port or
audio port. When the device is with built-in
sound card, it support using Type-C data
cable to connect and transmit audio.
Note: When used as a transmitter, please
adjust your Bluetooth headset or speaker to
adjust the volume.
TX Mode Operation Guide
When this adapter is in transmit mode, it can
be used with non-Bluetooth devices to
transmit the sound to the Bluetooth devices
like Bluetooth headset or Bluetooth speaker.
3
How To Use
Game Console
PC
TV
BT
Headset
BT
Speaker
Search devices
Pairing status
4
Note: There are two input modes: AUX and
Type-C.
Dual Pairing
Two Bluetooth receiving devices can be
connected at the same time.
After completing the connection to the first
Bluetooth device as the above method,
connect to the second one in the same way.
Finish pairing
5
Then, two Bluetooth headsets or Bluetooth
speakers can work simultaneously.
RX Mode Operation Guide
When this adapter is in receiving mode, it can
transmit the music from mobile phones,
tablets, notebooks, etc., to non-Bluetooth
speakers with AUX audio input through the
Bluetooth receiving function of this adapter.
How To Use
Non-Bluetooth
Speaker
Smartphone
Tablet
Notebook
6
Finish pairing
Switch to RX and
Search devices
Insert and
power on
7
Dual Pairing
The adapter can receive signals from two
Bluetooth transmitting devices (mobile phones,
tablets or notebooks) at the same time.
The connection steps are the same as above.
Note: It just allow to support pairing with two
transmitting audio devices at the same time,
that is, listen to two devices alternately in
receiving mode.
Restore Factory Settings & Clear Bluetooth
Pairing List
After shutting down, long press the power
button and hold it on for about 10 seconds
until the prompt of restoring factory settings
appears.
8
Charging
When the adapter is in low power or can’t
power on, you can charge it via the Type-C
port.
Trouble Shooting
When you encounter the following problems,
you can try the following methods to solve:
1. The adapter is not working properly ?
1) Please connect this product to a power
adapter to charge, and check whether the
battery is out of electricity.
2) The device has been connected to the
adapter but there is no sound. Please check
whether the volume of the adapter is 0.
3) The mobile phone cannot search for or pair
with the adapter. Please check whether the
adapter is in the RX receiving mode. You can
refer to the above RX mode operation
guide.
4) The Bluetooth device (Bluetooth headset or
speaker) cannot be searched when the
adapter is in TX mode. Please check
whether the adapter is in searching for the
Bluetooth device status in TX mode. You can
9
refer to the above TX mode operation
guide.
2. What should I do if there is no sound when
two audio devices are connected at the
same time in TX mode ?
1) First, make sure that the two audio devices
have been paired with the adapter.
2) It is necessary to confirm whether the
volume of the audio device is automatically
reduced to the lowest level or whether it
automatically stops playing music. At this
time, it is necessary to let the audio device
to play music or increase the volume. Note:
When the Bluetooth headsets or speakers
stop playing, it may appear that the music
of the audio output device is still playing.
After the playback is resumed, the music
can continue to play.
3) You can connect the two devices again after
restarting the Bluetooth adapter.
3. Why can't I search for Bluetooth headsets or
Bluetooth speakers in TX transmit mode ?
The device may not be compatible with the
Bluetooth adapter. For example, Sony's
WF-1000XM3 is unable to be searched.
Indice
Lingue:
Altri manuali AGPtek Lettore MP3
AGPtek
AGPtek H50 Manuale utente
AGPtek
AGPtek X21T Manuale utente
AGPtek
AGPtek M08 Manuale utente
AGPtek
AGPtek M3 Manuale utente
AGPtek
AGPtek G12 Manuale utente
AGPtek
AGPtek S66B Manuale utente
AGPtek
AGPtek A29 Manuale utente
AGPtek
AGPtek A29 Manuale utente
AGPtek
AGPtek G05 Manuale utente
AGPtek
AGPtek B05ST Manuale utente
AGPtek
AGPtek A50 Manuale utente
AGPtek
AGPtek A22 Manuale di istruzioni
AGPtek
AGPtek A20 Manuale utente
AGPtek
AGPtek S12 Manuale utente
AGPtek
AGPtek B03 Manuale utente
AGPtek
AGPtek A18 Manuale utente
AGPtek
AGPtek MF1B Manuale utente
AGPtek
AGPtek A58 Manuale utente
AGPtek
AGPtek X26 Manuale utente
AGPtek
AGPtek T01S Manuale utente
