AGPtek H01 Manuale utente

User Manual

H01 Music Player

CONTENT

English

Deutsch

Français

Italiano

Español

日本語

01/08

09/17

18/26

27/35

36/44

45/53

..............................

>>AGPTEK

Operation

•Press the multi-function button(MFB) at the

bottom of the LCD to switch the different

interfaces in turn.

•Press and hold MFB to confirm or enter into the

function you want to access to.

Charge the bracelet

Detach the wristband, and connect the bracelet to

the running computer or 5V/500mA USB charger for

safe charge. When in charging, the bracelet will

automatically power off.

App Download & Supported

•For first use, we recommend you binding App to

synchronize the data. After binding successfully,

the bracelet will automatically synchronize and

update its data.

•Scan the QR code with mobile phone to download

the App "GloryFit, or search "GloryFit" in "App

store"on mobile phone.

•Note: Mobile phone must support iOS8.0 or

above/Android4.4 or above/Bluetooth 4.0.

Bind bracelet to App

Turn on the App and allow App to turn on Bluetooth

of your device. At this moment, App will start to

search for device(iOS/Android). If it is failure, click

the search icon in the upper right. Select the device

you want to bind.

•Note:

1. You need to bind your bracelet in this App, not

directly via phone's Bluetooth connection.

2. When pairing successfully, App will automatically

record bracelet's Bluetooth information. Once App

is turned on, App will automatically search and

connect bracelet if your phone's Bluetooth is on.

3. On the Today interface of App, manually pull down

the interface to synchronize and update the data.

The bracelet can store offline data of 7 days. The

more data it stores, the longer the synchronization

time needs, maximum time about 2 minutes.

Introduction of App

•Set your personal information.

Select Me -- Personal -- Set your information

according to your actual information.

The steps, sleep time, heart rate and blood

pressure recorded daily will be displayed on

Today of the App.

•Sleep monitor

Record the sleeping situation from 6:00 pm of the

current day to 12:00 pm of the next day. There

may be a 30 minute error. When you are in sleep,

the bracelet will enter into the sleep monitor

mode to detect your sleep. The monitored

information of bracelet will be synchronized to

the bracelet. Note: Only wear the bracelet, you

will get these above information.

•Smart Alarm clock.

Three Alarm clocks can be set in App. After

setting, it will be synchronized to the bracelet.

When the alarm is activated, the bracelet will

vibrate to remind you. It also support the offline

alarm.

•Reminder function.

Binding the bracelet to the App, find App

reminder in Device of App. Manually turn on one

of these Apps (Twitter, Facebook, Messenger,

WhatsApp, QQ, WeChat, Skype, LINE, Hangouts)

that you want to be reminded on the bracelet.

•Call reminder.

When there is an incoming call, the bracelet will

vibrate. And LCD of Bracelet will display name or

number of caller. If you have turned on Reject a

call with a key, hold MFB for 3s to reject the call.

•Sedentary reminder.

The reminder interval is 1 hour by default. Set the

interval according to your needs.

Display & Functions

Home. Display time, battery and heart rate.

Press MFB to cycle through different

functions. Hold MFB for 3s to enter into

the function that you would like to access

to.

Steps. Record every step you take each day.

These steps will also be updated in the App.

When user is walking, the bracelet will

record the number that your arms are

swing as the number of walking steps.

Distance. Display the distance you walk in

that day. This value is to calculate

according to walking steps and your

height set in App.

Calories. Display the total calories of that

day you are burned (Based on walking

steps, your setting height and weight in

App).

Heart rate. In the heart rate interface, it

will automatically detect your heart rate.

Blood pressure. In the interface of blood

pressure, it will automatically detect your

blood pressure.

Training. In this interface, hold MFB for 3s

to enter into rope skipping, running, riding.

Press it to switch different sports.

Message. Turn on SMS reminder, the

bracelet will save the 8 messages recently

pushed by the App when receiving a new

message. Press MFB to cycle through the

messages; Hold it for 3s to browse it. Hold

it for 3 seconds again to delete the current

message.

Function. Hold MFB for 3s to access to its

submenu.

•Submenu of Function

1. Info. Hold MFB for 3s to check the firmware

version and Bluetooth information.

2. Reset. Hold MFB for 3s, all data of bracelet will be

cleared. The data of the day in App also will be

cleared. (The rest of the historical data continues

to be retained.)

3. Power off. Hold MFB for 3s will power off, and hold

it for 3s again to power on.

4. Find me. Hold MFB for 3s to search your phone.

After a successful search, your phone will respond

to this.

5. Brightness. Hold MFB for 3s until the icon shake.

Press MFB to adjust brightness.

Note: The sensor on the back of the bracelet should

be close to your skin during monitoring. In addition,

please ensure that your skin is clean to avoid the

external environment affecting the testing results.

Warnings

•The bracelet is charged by 5V/500mA charger. Do

not charge it with the over-voltage power supply.

•If there's water on the bracelet, dry it in time.

•Working temperature is from 0 to 45 degree.

Prohibit throwing it into the fire to avoid

exploding.

•Please wipe the the sweat on your wrist in time.

Prohibit the wristband be exposed to soap, sweat,

allergen or contaminated ingredients for a long

time to prevent skin irritation.

•Do not touch chemicals such as gasoline, cleaning

solvents, propanol, alcohol or insect repellent to

prevent damage to the bracelet.

•Do not use this product in high pressure and high

magnetic fields.

FQA

•Cannot bind to the bracelet?

Please make sure your phone being power on and

active. And ensure your bracelet have not connected

to other phones. Then keep the bracelet closer to the

phone. The phone and bracelet will automatically

bind. If it still does not bind, please turn off the

phone's Bluetooth, and then restart the phone's

Bluetooth after 20s.

•Cannot bind to Phone's Bluetooth?

1. Make sure that mobile phone supports

iOS8.0/Android4.4 or above/Bluetooth 4.0.

2. Due to the signal interference of the Bluetooth

connection, the connection time may vary from

time to time. If it fails to connect for a long time,

please ensure that the operation is free of

magnetic fields or without interference from

multiple Bluetooth devices.

3. Turn off Bluetooth and restart it once again.

4. Turn off all Apps in the background or boot up

your phone once again.

5. Your phone does not bind other Bluetooth devices

at the same time.

6. Whether the App is working normally in the

background, if not, it may not be connected.

•Why can not receive the notification when the

reminder function is turned on?

1. Android device. Make sure your phone has been

connected to the bracelet and you have turned on

the corresponding permission in the phone

settings. Allow App to access calls, text messages,

contacts, and keep the App running in the

background; if the phone is equipped with security

software. Please add "GloryFit"as Trust.

2. iOS. Restart your phone and connect the bracelet

once again. When connecting the bracelet, you

must wait for the phone to pop up Bluetooth

Pairing Request and click "Bind"to have a

reminder.

•Does the Bluetooth connection need to be

turned on all the time? Is there still data after

disconnection?

1. When Bluetooth is not connected, the previous

data will remain on the bracelet (you can keep 7

days of data). When the mobile phone is

connected to the bracelet successfully, the bracelet

data will be automatically uploaded to the mobile

phone and start synchronizing data.

2. Note: If you enable the call and SMS alert feature,

you must keep Bluetooth connected.

Specifications

Model

H01

Screen

0.96 TFT Color screen

Wristband material

TPU

Battery

100mAh Li-Polymer

battery

Battery model

351524

Input

DC 5.0V

Charging time

1-1.5H

Working time

Up to 14 days

Waterproof

IP67

Working

temperature

-10~50℃

Net weight

20g

Size

56.5*19.4*12.6mm

Manufacturer: Shenzhen Ballet Digital Technology

Co., Ltd.

Address: 3rd Floor, Building A1, Iron Tower Industrial

Park, Hedi Road, Shang Village, Gongming Town,

Guangming New District, Shenzhen, China.

E-mail: sup[email protected].

If you have any question or any idea about this

product, please feel free to contact us.

Indice

Lingue:

Manuali Lettore MP3 popolari di altre marche

Blaupunkt

Blaupunkt Compact Drive MP3 Manuale utente

Memorex

Memorex MMP9008 - 8GB USB 2.0 Manuale utente

Meizu Electronic Technology

Meizu Electronic Technology E5 Manuale utente

Naxa

Naxa NMV-173NX Manuale utente

Philips

Philips PSA250 Manuale utente

Zipy

Zipy go! Waving Manuale utente

Sylvania

Sylvania SMPK4068 Manuale utente

Sony

Sony NW-MS7 - Memory Stick Walkman Manuale utente

Irradio

Irradio RF-42UC Manuale utente

NABAIJI

NABAIJI SWIM MUSIC 100 Manuale utente

Laser

Laser MP3-A9-4GB Manuale utente

Samsung

Samsung YP-T7F Manuale utente

Savant

Savant SMS-1001-00 Guida di riferimento rapido

Trevi

Trevi XP 71 BT Manuale utente

MobiBlu

MobiBlu DAH-1500i Manuale utente

Denver

Denver MPS-201 Manuale utente

Steren

Steren MP3-002 Manuale utente

Kenwood

Kenwood M1GD50 Manuale utente