1.Attach mounting plate to the wall,
use pencil to mark the position of
installation three holes.
Tips: Ensure the distance
between sensing window and
counter top is above 35cm
When installing on stainless
steel counter top.
Floor
Note；Reference the product
Installation Panel
Liquid outlet
Bottom
Key
Cap
Sealing Cap
Fixed Bracket
Battery Container
Sensor window
Batteries container
Drain outlet
Indicator
Shell
Battery Container
Pencil
Drill
Expansion screw
2.Use a drill to bore three holes
(φ6) according to the marks, put
expansion screw head into the
corresponding holes.
3.Screws will be matched with
plastic nail – heads in the wall,
fix them together with mounting
plate.
4.Hook up unit with right direction and press,
make sure the unit is table by hooking up with
the mounting plate.
5.Push down slightly on the unit, then the unit
and the mounting plate hook up tightly.
Dimension
Installation
To make sure the unit dose work and extend its lifespan under the good condition, please
notice that:
1.Please read user manual and instructions very carefully before installing the unit.
2.Please using the same AA battery (6 pcs) of well – known brand. Old and new batteries can
not be mixed. If counterfeit or low-grade batteries are used, it may do harm to the unit
lifetime.
3. Please check the wall is flat or not and clean the surface of wall before installing the unit.
4.Distance (more than 25cm) will be needed from the bottom of unit to tables or other
objects.
5.The instructions of installing will be given to the user or manager by qualified person.
6.Reflective objects must not be put in the sensing distance under the unit.
7.Please do not cover with reflective objects (such as mirror or stainless steel) on the table
against the bottom of the unit, to avoid wrongly placed.
8.Indoor use only, to avoid wrongly placed.
UnitX1 Installation Panel X1
Expansion Screw X3
1.Please make sure if any items are missing or problems before installing, contact your dealer or
manufacturer.
2.Specification of part items changed might be not informed in time, please contact your dealer or
manufacturer when problems can not be solved during installing.
3.Main objects are sealed by special bag. Do not hit or drag too heavy when you move or open the
bags.
Certification X1 Key X1
ST4X25 Screw X3 Installation Manual X1
Packing list
Important Safety Instruction Installation
Introduction
Battery Installing and Replacement
Indicator
Battery Container
Screw
1. Keep the body straight up
when the LED light is flashing
2. Unscrew the screws and pick
out the battery container
3. Put in or replace all standard batteries
{DC 9V/AA batteries (6 Pcs)}. Put it back
and tighten the screws.
