AiP ABA-003IR Manuale utente

SWIR Camera Series

ABA-003IR

ABA-001IR

User's Manual

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 2 -

【Treatment of this manual】

1. This product is for experts who has related knowledge. Before using this product, make sure to read this user’s manual well and operate

correctly.

2. Please keep this user’s manual for checking at any time. Also please reread the manual for operating with the correct way.

3. AVALDATA Corporation reserves the right to make changes to the manual without prior notice. Please make sure to use latest manual by

downloading from AVALDATA homepage etc.

AVALDATA Corporation can NOT be held responsible for any typographical errors or technical errors regardless of the 3rd paragraph.

4. Unauthorized copying the part of contents or all contents of this manual are strictly prohibited.

5. Manufacturer names and product names used in this manual are trademarks or registered trademarks of each company.

6. We made assurance doubly sure on the contents of this manual. However, if you find something questionable, incorrect, or omitted, please

contact the shop of purchase.

【For Export】

1. If you uses this product outside of Japan, we do NOT support maintenance service and technical support on the spot.

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 3 -

Before Reading User's Manual

Following symbols and signal words are used in this manual to ensure that our

customer can use this product safely and to prevent the harm to persons or property.

Fully understand the meanings of these symbols before reading the body of the manual.

WARNING:

Indicates a potentially hazardous situation that can result in death or serious injury

if you do not follow instructions.

CAUTION:

Indicates a potentially hazardous situation that can result in minor/moderate injury or

property damage if you do not follow instructions.

Indicates a potentially hazardous situation that can result in electric shock

if you do not follow the instruction.

Indicates a potentially hazardous situation that can result in injury

if you do not follow the instruction.

Indicates a potentially hazardous situation that can result

in heat-induced disorder if you do not follow the instruction.

Instructs the operator to pull out the plug of power cable without fail for safety.

Indicates a potentially hazardous situation that can result in smoking or fire

if you do not follow the instruction.

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 4 -

CAUTION:

◆Do not use this product in a watery or humid place. Otherwise it can cause electric

shock.

◆Do not hold the plug of equipment’s power cord with wet hand when connecting it to

AC outlet. Otherwise it can cause electric shock.

◆Do not touch this equipment with wet hand when power cord is connected to AC outlet.

Otherwise it can cause electric shock and damage to the equipment.

◆Pull out the plug of power cord from AC outlet before installing/removing peripheral

device. Installing/removing peripheral device with power cord connected to AC outlet

can cause electric shock.

◆Connect the plug of equipment’s power cord to an independent AC outlet with a ground

terminal. No connection or loose connection of ground can cause electric shock or

malfunction. Many loads on one AC outlet can cause the outlet to overheat and result

in fire.

◆In the case of failure or abnormality, stop the use immediately and let us know at the

specified contact address.

◆This Product is compatible with EU directive following as industrial equipment.

EMC Directive

Hazardous Substances Control Directive (RoHS)

◆Never repair or modify the product by yourself.

Otherwise it can cause in fire and electric shock.

This is not covered by the warranty (outside the CE conformity)

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 5 -

-Contents -

1. Precautions ......................................................................................................- 7 -

1.1. Handling of the Product...................................................................................................................... - 7 -

1.2. Cautions for use of product................................................................................................................. - 8 -

1.3. Disposal Method of the Product........................................................................................................... - 8 -

1.4. What the symbols mean ( CE )............................................................................................................ - 8 -

2. Before using this camera...................................................................................- 9 -

2.1. In case of a GigE camera.................................................................................................................... - 9 -

2.1.1. Software to be needed ................................................................................................................. - 9 -

2.1.2. Image capturing and settings by using TransFlyer SDK .................................................................... - 9 -

2.2. In case of a CameraLink camera.........................................................................................................- 15 -

3. General and specifications ..............................................................................- 16 -

3.1. Block Diagram ..................................................................................................................................- 17 -

4. Locations and functions ..................................................................................- 18 -

5. System connection .........................................................................................- 22 -

6. Setting...........................................................................................................- 24 -

6.1. Connecting to Gigabit Ethernet and settings ........................................................................................- 24 -

6.1.1. Network settings.........................................................................................................................- 24 -

6.1.2. Reset the network settings ..........................................................................................................- 26 -

6.2. Settings for Camera Link....................................................................................................................- 27 -

6.2.1. Communication settings ..............................................................................................................- 27 -

6.2.2. Communication Software .............................................................................................................- 27 -

6.2.3. Setting of serial port....................................................................................................................- 27 -

6.2.4. Setting of terminal ......................................................................................................................- 27 -

6.2.5. Confirm the connection ...............................................................................................................- 27 -

6.2.6. Camera Link Tap .........................................................................................................................- 27 -

6.3. GPIO connection...............................................................................................................................- 29 -

6.3.1. GPI circuit specifications..............................................................................................................- 29 -

6.3.2. GPO circuit specifications.............................................................................................................- 29 -

6.4. Trigger signal....................................................................................................................................- 30 -

6.4.1. Acquisition Control and Trigger.....................................................................................................- 30 -

7. Capturing image(s) .........................................................................................- 32 -

7.1. Settings for GigE ...............................................................................................................................- 32 -

7.2. Settings for CameraLink.....................................................................................................................- 33 -

7.3. Setting example to capture images .....................................................................................................- 33 -

7.3.1. Display example of serial communication (Tera Term)....................................................................- 33 -

7.3.2. AcapLib2 display .........................................................................................................................- 34 -

8. Functions .......................................................................................................- 36 -

8.1. Partial image readout ........................................................................................................................- 36 -

8.2. Output bit length ..............................................................................................................................- 37 -

8.3. Shading compensation ......................................................................................................................- 38 -

8.3.1. FFC (Flat Field Correction) setting method.....................................................................................- 38 -

8.4. Blemish compensation.......................................................................................................................- 41 -

8.5. LUT .................................................................................................................................................- 41 -

8.5.1. Format.......................................................................................................................................- 41 -

8.5.2. Binarization ................................................................................................................................- 42 -

8.5.3. Arbitrary setting..........................................................................................................................- 42 -

8.5.4. Store the LUT settings .................................................................................................................- 42 -

8.6. Digital Gain Offset.............................................................................................................................- 42 -

8.7. AcquisitionControl .............................................................................................................................- 43 -

8.7.1. AcquisitionStart...........................................................................................................................- 43 -

8.7.2. AcquisitionStop ...........................................................................................................................- 43 -

8.7.3. AcquisitionMode..........................................................................................................................- 43 -

8.7.4. AcquisitionFrameCount ................................................................................................................- 43 -

8.7.5. Acquisition Reset.........................................................................................................................- 43 -

8.7.6. ExposureMode ............................................................................................................................- 44 -

8.8. Trigger control ..................................................................................................................................- 44 -

8.8.1. TriggerSelector ...........................................................................................................................- 44 -

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 6 -

8.8.2. TriggerSource .............................................................................................................................- 45 -

8.8.3. TriggerActivation.........................................................................................................................- 45 -

8.8.4. TriggerMode ...............................................................................................................................- 46 -

8.8.5. TriggerDelay...............................................................................................................................- 46 -

8.9. Trigger setting example and its timing ................................................................................................- 47 -

8.9.1. ExposureMode = Timed (Free-running).........................................................................................- 47 -

8.9.2. AcqusitionStart/End/Active trigger and ExposureMode=Timed.........................................................- 48 -

8.9.3. ExposureActive trigger and ExposureMode=Timed .........................................................................- 50 -

8.9.4. ExposureActive, ExposureMode=TriggerWidth ...............................................................................- 52 -

8.10. DigitalIOControl ..............................................................................................................................- 54 -

8.10.1. Line0(CC1,2,3,4).......................................................................................................................- 54 -

8.10.2. Line 1, Line2.............................................................................................................................- 55 -

8.10.3. UserOutput...............................................................................................................................- 56 -

8.11. Digital noise filter(DNF) ...................................................................................................................- 57 -

8.12. Test pattern output .........................................................................................................................- 58 -

8.13. Temperature ...................................................................................................................................- 58 -

8.13.1. Cooling system .........................................................................................................................- 58 -

8.13.2. Readout function.......................................................................................................................- 59 -

8.14. User ID ..........................................................................................................................................- 59 -

8.15. Store and start-up ...........................................................................................................................- 59 -

8.16. Initialize user settings......................................................................................................................- 60 -

8.17. Camera information .........................................................................................................................- 61 -

8.18. Help command................................................................................................................................- 61 -

8.19. Reboot ...........................................................................................................................................- 61 -

9. Camera Control Commands.............................................................................- 62 -

9.1. CameraLink command format.............................................................................................................- 62 -

9.2. CameraLink command input and response ..........................................................................................- 62 -

9.3. Ethernet camera , GenICam™and TransFlyer style..............................................................................- 62 -

9.4. Command list(CameraLink) ................................................................................................................- 63 -

9.5. Command list(GigE Vision).................................................................................................................- 67 -

9.6. Setting range and restrictions.............................................................................................................- 71 -

10. Appendix......................................................................................................- 72 -

10.1. Spectral response............................................................................................................................- 72 -

10.2. Definition of defective pixel..............................................................................................................- 72 -

10.3. Outlook dimensions .........................................................................................................................- 73 -

10.3.1. ABA-003IR-GE...........................................................................................................................- 73 -

10.3.2. ABA-003IR-CL ...........................................................................................................................- 74 -

10.3.3. ABA-001IR-GE...........................................................................................................................- 75 -

10.3.4. ABA-001IR-CL ...........................................................................................................................- 76 -

10.4. EU Declaration of Conformity ...........................................................................................................- 77 -

11. Manual History .............................................................................................- 78 -

12. Support Offices ............................................................................................- 79 -

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 7 -

1. Precautions

Thank you for purchasing ABA-001IR / ABA-003IR camera.

Please read this user's manual thoroughly to ensure the proper use of this product.

1.1. Handling of the Product

■ Do not use this product at a place where it can be subject to spillage of

chemicals. Spilled chemical on this product can cause short-circuit and

result in fire, failure or deformation.

■Do not use or store the product in a place where it can subject to spillage

of liquids such as water and oil, a place exposed to steam, or a place of

high humidity. Otherwise it can cause failure of the product.

■Use or store the product in a flat place with sufficient strength. Do not

apply vibration or impact on the product.

■Do not use or store the product in a place exposed to direct sunlight or a

place close to fire or heaters such as stoves. Otherwise, it can cause

failure or deformation.

■Do not use or store the product in a dusty place.

■Do not use the product at a place close to TV, radio or cordless phone.

Otherwise, TV, radio or cordless phone can sound noise.

■ Do not use or store the product at a place close to the equipment

generating magnetism or electric wave. Otherwise, it can cause failure of

the module.

■Do not put heavy goods on the product. Otherwise it can cause failure of

the module.

■ Do not pour liquid such as water in the product. Otherwise it can cause

electric shock.

■Static electricity can cause failure of the product. Take sufficient

preventive measure against static electricity such as discharging static

electricity of human body when handling the module.

■Be careful not to get your hand injured by the front or rear surface of the

module when handling the product.

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 8 -

1.2. Cautions for use of product

■Precautions for installing procedure of the product

a) Check the switch on the product is set correctly.

b) After confirming the installation of the product in the system,

turn on the power of the system and check the operation.

■Precautions for removing procedure of the product

a) Be sure to turn OFF the power of the system before removing the

product, Otherwise it can cause failure.

b) Right after turn OFF the power of the system, the product may be

heated to a high temperature. please handle it with care.

1.3. Disposal Method of the Product

Important:

This product must not be disposed of along with normal household waste.

Please protect the environment by handing this item and any components to a

recycling centre.

your local authority will have details of these.

1.4. What the symbols mean ( CE )

Conforms to European Standards on health,

safety and the environment.

ABA-003IR only.

(ABA-001IR will be acquired.)

Cautions

Be sure to unplug the power code and turn off the power of the system before

installing or removing this product. Otherwise it can cause electric shock.

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 9 -

2. Before using this camera

2.1. In case of a GigE camera

2.1.1. Software to be needed

The Camera uses Gigabit Ethernet interface and this interface conforms to GigE Vision®、GenICam TM

specifications.

Therefore, SDK available in the market may be used to operate camera but the connectivity with other

SDKs is not confirmed yet.

In this operation manual, the gigabit Ethernet interface uses SDK-TransFlyer (Type:AZP-ACAPTF-01) for

image capturing and controlling the camera.

The plat form required to use GigE Vision Network

Network Interface Card

Gigabit Ethernet AvalData APX-3404, Intel PRO/1000 MT

Jumbo frame

Card with MTU of more than 9000 byte

Note

To use the software for the third party available in the market is now investigating.

The plat form required foer the third party GigE Vision software

GenICam™ GenApi version 2.4

AcquisitionControl

FileAccess: firmware, LUT, FFC, configuration data, upload and

download

GenICam™ XML schema version 1.1

GigE Vision® version 1.2

GigE Vision®

GenICam™ XML camera description file

The camera should has XML file inside the camera.

2.1.2. Image capturing and settings by using TransFlyer SDK

Aval Data, the TransFlyer can quickly capture the image and make necessary settings to operate the

camera. The TransFlyer TSight viewer can the capturing the image and setting the camera easier and the

TransFlyer TConfigurator has the network setting and remote update functions.

TransFlyer TSight Viewer TConfigurator Network and update

SWIR Area Camera Series User’s Manual

(OM170000021A)

- 10 -

2.1.2.1. Installation of SDK-TransFlyer

Our latest acquisition packages of the SDK TransFlyer that can be obtain at following;

http://www.avaldata.co.jp/english_08/index.html

1) After a download image extract , execute “ AvalSetup.exe”.

2) Click a “Install” button.

3) Click “OK” button.

Note:

SDK-TransFlyer requires runtimes below.

‘.NET Framework4.0’

‘Microsoft Visual C++2010’

If your PC already installed these runtimes, please uncheck them.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali AiP Sistema I/O

AiP

AiP AOC-162 Manuale utente

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Advantech

Advantech PCM-27J3AU Manuale di installazione e funzionamento

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

M-system

M-system R3Y-RS8 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

ABB

ABB OPT-MF-001 Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente