aircom.it .10
EN
The painting MUST preferably take place in a special painting booth
equipped with a suction hood. Do not use the unit if the vacuum system
is not running. Wear protective gloves, goggles and a mask with filters
for breathing with activated carbon and clothing suitable for body
protection.
The pneumatic piston pump must only be used by competent and trained
personnel for its safe and correct use. Make sure that the personnel
assigned to use it have received adequate training and have fully
understood this user manual. To use the spray gun, COMPLY STRICTLY
with the prescriptions and safety criteria indicated below.
• Always work on the equipment protected by the prescribed PPE; gloves
protective masks, breathing filters with activated carbon, clothing suitable
for body protection.
• The pump is used with paint products or solvents, bear in mind tha
these are highly flammable, therefore use the system in well-ventilated
environments and avoid any action that could cause fires (example:
smoking, high temperature slag or shavings, sparks or any electrical
risk).
• CHECK the chemical compatibility of the products to be used from thei
safety data sheets.
• The use of products containing organic solvents can cause poisonin
due to the emission of toxic vapours.
• DO NOT USE with food or medicines
• DO NOT EXCEED the maximum operating pressures indicated (se
paragraph 2.3). BEFORE any disassembly, cleaning, maintenance and
reassembly operation RELEASE the pressure in the pipes
• Never point the paint gun at the human body or at animals
• Do not modify or alter the equipment as supplied; in addition to bein
able to cause malfunctions, or worse, even dangerous failures, you would
invalidate the guarantee.
SAFETY
