Airwell RCW4 Manuale utente
TECHNICAL MANUAL
RCW4 vs RCW3
Wiring RCW4 vs RCW3
Object :
This bulletin is explaining the method to connect mix
wired remote controller RCW4 (accessory code 7ACEL1613)
vs RCW3 (part code G30294219_K51264).
Février 2017
RCW4
RCW3
Method :
Reminder :
Wired remote RCW4 Wired remote RCW3
Quantity by installation = 1 Quantity by installation = 1
per indoor unit
For the wiring, it is requested to order cable G40113325.
Quantity by installation = 1 per indoor unit
Wiring :
[SETTING OF WIRED REMOTE CONTROLLERS RCW3 & RCW4 ]
RCW3 setting
All the remote RCW3 must set separately !
Step 1 :RCW3 is OFF status.
Step 2 : Hold simultaneously “Function” and “mode“ during 5
secondes till hearing a Bip sound.
Step 3 : Set for each indoor unit a different address by using
arrows buttons..
Step 4 : Press Enter/Cancel button to validate setting.
RCW4 setting
Step 1 : RCW4is OFF status.
Step 2 : Start automatic addressing hold simultaneously “Mode“
&“Thu“ buttons during 5 secondes.
Step : Addressing procedure is requesting about 10 minutes and
will end when on the RCW4 will display all indoor units
addresses.
Questo manuale è adatto per i seguenti modelli
3
Altri manuali Airwell Telecomando
Airwell
Airwell RC08C Manuale utente
Airwell
Airwell RC15-7ACEL1801 Manuale utente
Airwell
Airwell RC5 Manuale utente
Airwell
Airwell RCW25 Manuale utente
Airwell
Airwell RC08A Manuale utente
Airwell
Airwell RC7 Manuale utente
Airwell
Airwell RC 08B Manuale utente
Airwell
Airwell RC18 Manuale utente
Airwell
Airwell RC08A Manuale utente
Airwell
Airwell RC19 Manuale utente
