AJAX FireProtect 2 Manuale utente

FireProtect 2 (Heat/Smoke) Jeweller User

manual

Updated January 12, 2023

FireProtect 2 (Heat/Smoke) Jeweller is a wireless re detector with a built-in

siren. Intended for indoor installation. Detects smoke and temperature rise.

It is available in two modications: with sealed batteries (has SB in the name)

that run up to 10 years, and with replaceable ones (has RB in the name) that run

up to 7 years.

A list of compatible hubs and range extenders is .

The detector operates as part of the Ajax security system, communicating with

the hub via the secure radio protocol. The hub communication range is

up to 1,700 meters without obstacles.

available here

Jeweller

Buy FireProtect 2 (Heat/Smoke)

Versions of the detector with other sensor combinations are also available. All Ajax re

detectors are .

Functional elements

available here

1. The front panel of the detector with a . To activate the

button, press the central part of the panel.

Test/Mute button

2. SmartBracket mounting panel. To take off the panel, turn it

counterclockwise.

3. Device QR code and ID (serial number). Used for detector connection to the

Ajax security system.

4. . Triggers when trying to tear the detector off from the

surface or to take it off the mounting panel.

Tamper button

5. Detector certication information.

6. Power button.

Operating principle

FireProtect 2 (Heat/Smoke) is a wireless re detector designed for indoor

installation. Available in two modications:

7. First thermistor. Detects dangerous temperatures.

8. Green LED indicator.

9. Yellow LED indicator.

10. Red LED indicator.

11. Siren.

12. Second thermistor. Detects dangerous temperatu

13. Information about the detector’s end of life date.

14. Smoke chamber lid.

With sealed batteries. Such a detector has SB in its name. Sealed battery life

is 10 years. After the batteries are discharged, the detector should be

replaced with a new one.

With replaceable batteries. Such a detector has RB in its name. Pre-installed

battery life is 7 years. When the batteries are discharged, they can be

replaced with new ones.

How to replace FireProtect 2 RB batteries (Heat/Smoke)

00:00

00:12

The detector is equipped with a siren (piezoelectric buzzer) for sound

notication of alarms and events with a volume of up to 85 dB (at a distance of

3 m from the detector). The detector is always active and reacts to a re during

24/7, regardless of the system’s security mode.

FireProtect 2 is protected by two tampers. The rst tamper controls the removal

of the detector from the SmartBracket mounting panel: the detector reacts with

LED indication and sends notications to users in Ajax apps and the security

company monitoring station. The second tamper signals the removal of the

smoke chamber lid, which is located under the front panel of the detector.

Removing the smoke chamber lid is possible when the enclosure is fully disassembled.

The system detects this event as a malfunction. When the lid is removed, the detector

reacts with asound signal, and users and the security company receive a malfunction

notication.

The can respond to FireProtect 2 alarms and perform

user-dened actions using . For example, the

relay can turn on the ventilation system and emergency lighting when an alarm

occurs.

Operation without a hub

FireProtect 2 can be used without connecting to the Ajax hub. All you need is to

install the detector following this manual and turn it on.

In case of autonomous operation, the detector noties of re with a built-in siren

and LED indication only and does not send notications to the user’s

smartphone, Ajax Translator, or PRO Desktop. In this case, the

feature is not available.

Smoke sensor

FireProtect 2 detects smoke with a bispectral optical sensor. Inside the smoke

chamber, the sensor has blue and infrared LEDs which emit light at different

wavelengths. This technology allows the detector to determine the size of the

Ajax automation devices

automation scenarios WallSwitch

Interconnected

Fire Detectors Alarms

volatile particles inside the chamber and respond only to smoke, ignoring

vapour and steam.

The smoke chamber in FireProtect 2 is protected from dust, dirt, and insects.

Even if dust gets inside and settles, this does not threaten or impair re

detection. The optical system is designed to prevent non-volatile particles from

getting within the eld of both blue and infrared LEDs at the same time. So that

situation does not cause a false alarm.

The HazeFlow 2 software algorithm also protects against false alarms. When an

alarm is detected, the algorithm additionally processes the data received from

the detector and conrms the alarm.

Temperature sensor

Two built-in class A1 thermistors detect a rapid rise and exceeding the

temperature threshold in FireProtect 2. The thermistors of this class notify of

alarms when a rapid temperature rise or static temperature is detected in the

range of +54°C to +65°C.

The thermistors are mounted outside under the front panel of the detector. This

allows you to respond to threats faster than when the sensors are inside the

detector enclosure.

FireProtect 2 will reports that the temperature threshold has been exceeded as

soon as its value exceeds +64°C. The detector will reports a rapid temperature

rise if the indicator increases by 10°C within one minute. If the temperature

indicator rises sharply by 20°C or more, the detector signals immediately.

Test/Mute button

The Test/Mute button is located under the front panel of the detector. This is a

mechanical button. Тo activate it, press lightly on the central part of the front

panel with your hand or a suitable item if the detector is installed in a hard-to-

reach place. For example, you can do this with a mop handle.

The button performs several functions:

In normal mode, it starts the .detector self-test

Interconnected Fire Detectors Alarms
All re detectors of the FireProtect 2 product line support the Interconnected
Alarm feature. This feature activates the built-in sirens of all re detectors in the
system as soon as at least one of the re detectors has detected an alarm.
Sirens of FireProtect 2 detectors are activated within 20 seconds after an alarm
is detected. The sirens of   and   are activated during
the detector ping interval set in the Jeweller(or Jeweller/Fibra) settings, but no
later than 60 seconds after.
The   detectors have different sound and LED indications of alarm
types to make it easier for users to distinguish between them. In case of
interconnected alarm, all FireProtect 2 detectors indicate exactly the alarm type
detected by the initiating detector. Instead,   and 
detectors noties all types of alarms with the same sound.
Sending events to the monitoring station
The Ajax security system can transmit events and alarms to the 
monitoring app as well as the Central Monitoring Station (CMS) via SurGard
(Contact ID), SIA DC-09 (ADM-CID), ADEMCO 685, and other protocols. The list
of supported protocols is  .
Addressability of Ajax devices allows you to send to the PRO Desktop and to the
CMS not only events but also the type of the device, the name given to it, virtual
room, and security group. The list of transmitted parameters may differ
depending on the CMS type and the selected communication protocol.
The ID and detector loop (zone) number are available in the detector  .
In case of an alarm, it mutes the detector alarm or   of
all re detectors in the system.
Interconnected Alarm
FireProtect FireProtect Plus
FireProtect 2
FireProtect FireProtect Plus
How to set Interconnected Fire Detectors Alarms
PRO Desktop
available here
Which CMSs Ajax connects to
States

Adding to the system

Before adding a device

A can connect the device to the hub.

To connect to the hub, the detector should be within the coverage area of the

hub radio network. To operate via a , rst connect

the detector to the hub and then to the range extender. You can do this in the

range extender settings in Ajax apps.

How to connect FireProtect 2 to a hub

1. Install the .Ajax app

2. if you don’t have one.Create an account

3. Add a to the app. Set the required settings

and create at least one .

hub compatible with the detector

virtual room

4. Make sure that the hub is on and has Internet access via Ethernet, Wi-Fi,

and/or mobile network. You can do this in the Ajax app or by looking at the

LED indicator of the hub: it should light up white or green.

5. Make sure that the hub does not start updates and that it is disarmed by

checking the status in the Ajax app.

PRO or a user with system setup rights

radio signal range extender

1. Open the .Ajax app

2. Select the hub if you have several of them or if you are using the

Ajax PRO

app

3. Go to the Devices tab. Press Add Device.

4. Enter the name of the device.

Once connected, FireProtect 2 will appear in the hub device list in the Ajax app.

Device status update depends on the ping interval set in the Jeweller or

Jeweller/Fibra settings. The default value is 36 seconds.

FireProtect 2 works with only one hub. When connected to a new hub, the

detector stops transmitting data to the old hub. Once added to a new hub,

FireProtect 2 is not removed from the list of devices of the old hub. This must be

done manually in Ajax apps.

Indication

5. Scan the QR code or enter the ID manually. QR code is located on the rear

part of the enclosure (under the mounting panel) and on the device

packaging. The device ID can be found below the QR code.

6. Select the and security group (if the is enabled).virtual room group mode

7. Click Add; the countdown will begin.

If the maximum number of devices is added to the hub, when adding the one, you

will get a notication of exceeding the device limit. The number of devices that you

can connect to the hub depends on the .central unit model

8. Turn on the detector by holding the power button for 3 seconds. The hub

connection request is sent only if the detector is enabled. If the detector

fails to connect to the hub, try again in 5 seconds.

The detector cannot connect to the hub if they operate on different radio

frequencies. The radio frequency range of the devices may vary by the region of

sale. Please contact for information on the operating frequency

range of your devices.

technical support

LEDs and the built-in siren of the detector can report alarms, as well as some

detector states.

LED indication Sound indication Event Notes

The red LED blinks

continuously.

The siren beeps in

time with the LED

indication.

Alarm by:

The detector stops

alarming as soon as

its sources are

eliminated.

Also, you can mute

the alarm by pressing

the

or in the Ajax

app.

The LED and sound

indications resume if

the source of the

alarm is still present

after the muting timer

(10 minutes) has

expired.

The red LED blinks

every 8 seconds. No. Muted alarm.

The detector stops

alarming as soon as

its source is

eliminated.

The red LED blinks 2

times in a row. No. Restore after alarm.

If the source of the

alarm is removed, the

detector is restored

automatically.

The yellow LED lights

up for 1 second. No.

Tamper alarm.

The detector is

removed from the

SmartBracket

mounting panel.

smoke;

rapid temperature

rise;

temperature

threshold

exceeded.

Test/Mute

button

00:00

00:06

The green LED lights

up for 1 second. No.

The detector is

installed on the

SmartBracket

mounting panel.

Turns on when the

tamper is triggered.

Green, yellow, and red

LEDs light up in turn,

then go out.

No. Turning the detector

on.

To turn off the

detector, hold the

power button for 1

second.

Green, yellow, and red

LEDs light up at the

same time, then go

out in reverse order.

No. Turning the detector

off.

To turn off the

detector, hold the

power button for 2

seconds.

The green LED is

permanently on. No. Connection to the hub

in progress.

The indication turns

off after the detector

connection to the hub.

The green LED blinks

6 times in a row.No. No.

The detector has been

removed from the

hub.

The indication turns

on when the detector

receives information

that it has been

removed from the

hub.

The green LED blinks

once per minute. No. Detector power

supply is OK.

The indication is

present when the

detector is on and the

tamper state is OK

(the detector is

installed on the

SmartBracket

mounting panel).

There is no indication

when the detector

switches to the

mode.

The yellow LED blinks

2 times in a row every

minute.

The siren beeps 2

times in time with the

LED indication every

minute.

Malfunction is

detected.

All malfunctions are

displayed in the

detector in

Ajax apps. Fields with

malfunctions are

highlighted in red.

If the detector needs

to be repaired, contact

Jeweller Signal

Strength Test

States

Altri manuali per FireProtect 2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali AJAX Sensore di sicurezza

AJAX

AJAX FireProtect 2 (Heat) Jeweller Manuale utente

AJAX

AJAX FireProtect Manuale utente

AJAX

AJAX GlassProtect Manuale utente

AJAX

AJAX GlassProtect Manuale utente

AJAX

AJAX DualCurtain Outdoor Manuale utente

AJAX

AJAX FireProtect 2 Jeweller Manuale utente

AJAX

AJAX MotionProtect Manuale utente

AJAX

AJAX FireProtect 2 (CO) Jeweller Manuale utente

AJAX

AJAX MotionProtect Curtain Manuale utente

AJAX

AJAX LeaksProtect Manuale utente

AJAX

AJAX GlassProtect Manuale utente

AJAX

AJAX MotionProtect Manuale utente

AJAX

AJAX LifeQuality Jeweller Manuale utente

AJAX

AJAX LeaksProtect Manuale utente

AJAX

AJAX CombiProtect Fibra Manuale utente

AJAX

AJAX FireProtect Manuale utente

AJAX

AJAX GlassProtect Manuale utente

AJAX

AJAX FireProtect 2 Jeweller Manuale utente

AJAX

AJAX MotionCam Fibra Manuale utente

AJAX

AJAX CombiProtect Manuale utente

AJAX

AJAX FireProtect 2 (Heat) Jeweller Manuale utente

AJAX

AJAX MotionProtect Manuale utente

AJAX

AJAX GlassProtect Manuale utente

AJAX

AJAX FireProtect Manuale utente

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Satel

Satel OPAL Pro Manuale utente

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente