AJAX MotionProtect Curtain Manuale utente
MotionProtect Curtain User Manual
Updated August 14, 2020
MotionProtect Curtain is a curtain type wireless motion detector. The detector
has a narrow horizontal detection angle and is designed for indoor perimeter
control: windows, doorways, and other entrances or exits of the guarded facility.
Maximum motion detection distance is 15 m.
MotionProtect Curtain integrates into Ajax security systems, connecting to a
through the secure protocol. Wireless coverage may reach up
1,700 m line-of-sight. The pre-installed battery ensures up to 3 years of
autonomous operation.
An iOS or Android is used for detector setup. It also noties the user about
any events with push notications, SMS, or calls (if enabled).
Ajax can be connected to the central monitoring station of a security company.
Connection to and integration modules is not provided.
hub Jeweller
app
ocBridge Plus uartBridge
Functional Elements
Operating Principle
MotionProtect Curtain’s IR sensors detect intrusion into the premises by
detecting moving objects having a temperature close to that of the human body.
Once the system is armed, the detector starts polling its two IR sensors. If a
motion is detected, an alarm state is instantly sent to the hub and green LED
Buy curtain type motion detector MotionProtect Curtain
1. LED indicator
2. Detector light lter
3. Screw aperture for SmartBracket attachment panel
4. QR-Code
5. Power button
6. Tamper button
7. SmartBracket attachment panel (the perforated part is a part of tamper
protection for the cases when the detector gets pulled away from a surface)
starts ashing on the device. Having caught an alarm state, the Hub triggers
sirens and noties the user and the security company.
Motion alarms are sent every 5 seconds
To prevent false alarms, MotionProtect Curtain has a Correlation Signal
Processing functionality that can be . Once it is
active, the detector starts sending alarm states to the hub only if an identical
motion signal is registered by both IR sensors. If it is disabled, MotionProtect
Curtain sends an alarm state even with one of the two IR sensors triggered.
Pairing the Detector with a hub
Before you start pairing the detector:
Please note that only a user with admin permissions can add devices to the hub
Pairing MotionProtect Curtain with a hub:
enabled in the detector’s settings
What is correlation signal analysis and how does it work
1. Turn on your hub and check the Internet connection (via Ethernet and/or
GSM).
2. Install the on your smartphone. Create an account, add
your hub to the app, and create at least one room.
Ajax application
3. Check the status of the hub in the app to make sure it is disarmed and is not
updating.
1. In the Ajax mobile app, tap Add device.
2. Name the device, scan the QR code or enter it manually (placed on the back
of the detector body or its packaging), select the room for placement, and
For detection and pairing to occur, the device must be within a hub’s wireless
coverage (at the same facility). The connection request will be sent to the Hub
only once the device turns on.
If the MotionProtect Curtain fails to connect to the hub, it will automatically
power down within 6 seconds after turning on. There is no need to turn off the
device to retry.
tap Add. The countdown will start.
3. Turn on the detector by holding its power button for 3 seconds.
If the MotionProtect Curtain has already been paired with another hub, turn off
the detector, and then follow the standard pairing procedure.
After pairing, the detector will appear on the app’s hub device list. The frequency
of the device status updates depends on the polling interval indicated in the
hub’s settings (36 seconds by default).
If the detector identies movement before the system is armed, it will activate
not immediately but the next it is polled by the hub.
Statuses
Parameter Value
Temperature The detector’s CPU temperature (changes
gradually)
Signal Strength The strength of the signal between a hub and
the detector
Battery Charge The detector’s battery charge, displayed in the
increments of 25%
Lid
The status of the detector’s tamper device that
responds to the detachment and removal
attempts.
Delay When Entering, sec The delay for security system activation when
entering premises
Delay When Leaving, sec The delay for security system activation when
leaving premises
Connection Status of the connection between the hub and
the sensor
Sensitivity
Detector sensitivity:
1. Devices
2. MotionProtect Curtain
Low
High
Normal
Correlation signal processing Status of the
functionality
Always Active If enabled, motion detection is active always
Temporary Deactivation
Shows the status of the device: active,
completely disabled by the user, or only
notications about triggering of the device
tamper button are disabled
Firmware The detector’s rmware version
Device ID Device identier
Detector Setup
Setting Value
First eld Detector name (editable)
Room The virtual room to which the device can be
assigned
Sensitivity
The detector sensitivity selector:
Correlation signal processing The
function toggle
Always active If enabled, motion detection stays active always
Delay When Entering, sec The delay for security system activation when
entering the premises
Delay When Leaving, sec The delay for security system activation when
leaving premises
Delays in Night Mode The delay for security system activation in
signal correlation
processing
1. Devices
2. MotionProtect Curtain
3. Settings
High
Normal
Low
correlation signal processing
Night Mode
Arm in Night Mode If active, the detector becomes armed once
system enters Night Mode
Alarm LED indication
Allows you to disable the ashing of the LED
indicator during an alarm. Available for devices
with rmware version 6.53.1.1 or higher
Alert with a siren if motion detected If active, and are
activated if the motion is detected
Signal Strength Test Switches the detector into the signal level test
mode
Detection Zone Test Switches the detector to the detection area test
Attenuation test
Switches the detector into the signal
attenuation test mode (available in detectors
with rmware version 3.50 or later)
Temporary Deactivation
Allows the user to disconnect the device
without removing it from the system.
Two options are available:
User Guide Opens the detector User Guide
Unpair Device Unpairs the detector from the Hub and resets
its settings
Detector Indication
How to nd the rmware version or
the ID of the detector or device?
HomeSiren StreetSiren
Deactivate entirely — the device will not
execute system commands or participate in
automation scenarios, and the system will
ignore device alarms and other notications
Deactivate lid notications — the system will
ignore only notications about the triggering of
the device tamper button
Learn more about temporary
deactivation of devices
The MotionProtect Curtain indicator LED may turn red or green, depending on
the status of the device.
Indication when pressing the power button
Event Indication
The power button is pressed (detector is on) Lights up red while the button is held
Turning on Lights up green while the device is turning on
Turning off Lights up red, then ashes three times
Active detector indication
Event Indication Note
Connecting the detector to the
hub
Lights up green for a few
seconds
Hardware error Flashes red continuously The detector needs to be
repaired, contact support
Motion or tamper alarm triggered Lights up green for about 1
second
Battery replacement needed Smoothly lights up green
and goes off
For battery replacement
procedure, see
manual
Battery
replacement
Integrity Testing
Ajax security systems can run tests to verify the integrity of connected devices.
The tests start instantly, but no later than within 36 seconds by default. The test
start time depends on the detector polling interval setting (see the Jeweller
section in the Hub settings).
Detector Placement
The effectiveness of the security system depends on detector placement.
Choosing a location to install MotionProtect Curtain, consider the direction of
the light lter and obstacles that may affect the detector’s eld of view and the
radio signal transmission.
The device developed only for indoor use.
Incorrect placement may result in false alarms or faulty operation of the
detector.
Do not install the detector:
Signal Strength Test
Detection Zone Test
Attenuation test
Outside the premises (outdoors)
In front of the windows within reach of direct sunlight
Opposite of the objects that rapidly change temperature (e.g., electric and
gas heaters)
Opposite of the moving objects having a temperature close to that of the
human body (curtains swaying above a heating radiator)
In places with fast air circulation (near fans, open windows or doors)
If the detector keeps reacting to interference and raising false alarms, but it is
impossible to install it anywhere else, the Correlation Signal Processing can be
enabled in the settings.
Please note that if the Correlation Signal Processing is enabled, the range of motion
detection is reduced depending on the detector sensitivity chosen
Sensitivity Motion detection range w/ Signal
Correlation Processing *
Motion detection range w/o
Signal Correlation Processing *
Low Up to 6 m Up to 11 m
Normal Up to 7 m Up to 13 m
High Up to 8 m Up to 15 m
*at an ambient temperature of 23°C
If possible, avoid situations where the detector identies movement at a longer
distance than required. The best place to install it is within an enclosed place.
For instance, to detect movement in an archway, install the detector in it. This
way, the detector will be triggered only by a person that enters it.
Near metal objects and mirrors that cause the attenuation or interfere with
radio signals
Within any premises with the temperature and humidity beyond the
permitted range
Closer than 1 m to a hub
Indice
Altri manuali AJAX Sensore di sicurezza
AJAX
AJAX MotionCam PhOD Jeweller Manuale utente
AJAX
AJAX ReX Manuale utente
AJAX
AJAX MotionProtect Fibra Manuale utente
AJAX
AJAX FireProtect Manuale utente
AJAX
AJAX FireProtect 2 Heat/CO Jeweller Manuale utente
AJAX
AJAX FireProtect 2 Jeweller Manuale utente
AJAX
AJAX DoorProtect Plus Manuale utente
AJAX
AJAX MotionProtect Jeweller Manuale utente
AJAX
AJAX vhfBridge Manuale utente
AJAX
AJAX LeaksProtect Manuale utente
AJAX
AJAX CombiProtect Manuale utente
AJAX
AJAX HomeSiren Manuale utente
AJAX
AJAX DoorProtect Manuale utente
AJAX
AJAX LeaksProtect Manuale utente
AJAX
AJAX FireProtect 2 Jeweller Manuale utente
AJAX
AJAX MotionProtect Manuale utente
AJAX
AJAX DoorProtect Plus Manuale utente
AJAX
AJAX MotionProtect Manuale utente
AJAX
AJAX GlassProtect Fibra Manuale utente
AJAX
AJAX DoorProtect Manuale utente
