AJAX MotionProtect Manuale utente

MotionProtect Outdoor User Manual

Updated June 24, 2020

MotionProtect Outdoor is a wireless outdoor motion detector for the Ajax

security system. The detector communicates with the hub via protected

radio protocol at a distance up to 1,700 meters in the line of sight.

MotionProtect Outdoor features protection against blocking the detector view

(anti-masking system) and triggering by pets (pet immunity). The motion

detection distance is adjustable: from 3 up to 15 meters.

MotionProtect Outdoor can operate both on pre-installed batteries or use an

external power supply. Depending on the detector settings, the batteries’ life is

up to 5 years.

MotionProtect Outdoor does not support connection via the and

integration modules.

The user can congure the detector via the for iOS, Android, macOS,

and Windows. The security system noties users of all events through push

notications, SMS, and calls (if activated).

Jeweller

ocBridge Plus

uartBridge

Ajax app

The Ajax security system can be connected to a central monitoring station of a

security company.

Functional Elements

Buy outdoor motion detector MotionProtect Outdoor

1. Main light indicator

2. Upper light indicator and masking sensor

3. Upper motion sensor lens

4. Masking sensor

5. Lower light indicator and masking sensor

6. Lower motion sensor lens

7. SmartBracket attachment panel (perforated part is required for actuating

the tamper button in case of any attempt to dismantle the detector)

8. The hole for attaching SmartBracket panel with a screw

9. “On” button

10. Tamper button

11. QR Code

Operating Principle

When the system is armed, the detector continuously receives signals from two

PIR sensors. If both sensors detect identical motion, MotionProtect Outdoor

instantly transmits an alarm signal to the hub and blinks with a green LED.

MotionProtect Outdoor ignores animals, birds, insects, as well as swaying plants

and trees.

By a motion alarm, the security system also can activate sirens and notify a security

company if connected.

The detector recognizes motion and sends the rst alarm immediately, but next alarms

until disarming are transmitted no more than once in 5 seconds.

If a motion is detected before the system is armed, the detector will be armed

not immediately, but during the next polling by the hub.

12. Connector for external power supply cable outlet

13. Scrollbar for adjusting the motion detection range

Learn more about the algorithm of the detector operation

Anti-masking system

Masking is an attempt to block in any way the view of the detector’s lens.

MotionProtect Outdoor detects the following types of masking:

If one or more types of masking are detected, the detector generates a masking

alarm and lights up a green LED for 1 second.

MotionProtect Outdoor detects masking regardless of the security state: armed

or disarmed.

Response time to masking

Masking type

Active mode (detector is armed) Passive mode (detector is disarmed)

Time to alarm, s Time to restore,

sTime to alarm, s Time to restore,

An obstacle in

front of both

lenses

2 5,4 300 18

An obstacle in

front of any of

the lenses

150 13 150 5,4

Pasting or

painting any of

the lenses

150 13 150 5,4

Pasting the

detector front

side

150 9 300 18

An obstacle in front of both lenses (an object on the height of the detector

and at a distance of up to 20 cm in front of it)

An obstacle in front of any of the lenses (an object at a distance of up to 10

cm in front of one of the lenses)

Painting or pasting any of the lenses with an opaque substance

Pasting the detector front side with an opaque substance

Applying an aerosol or painting the detector front side with lacquer/paint

Applying aerosol

or painting the

detector front

side with

lacquer/paint

150 9 150 9

Connecting

Before starting connection:

Only users with administrator rights can add the device to the hub

How to connect the device to the hub:

1. Following the hub user guide, install the . Create the account, add

the hub, and create at least one room.

Ajax app

2. Switch on the hub and check the internet connection (via Ethernet cable

and/or GSM network).

3. Make sure that the hub is disarmed and does not update by checking its

status in the Ajax app.

1. Select theAdd Deviceoption in the Ajax application.

2. Name the device, scan/write manually the QR Code (located on the body

and packaging), and select the location room.

For the detection and interfacing to occur, the detector should be located within

the coverage area of the wireless network of the hub (at a single protected

object). Request for connection to the hub is transmitted for a short time at the

time of switching on the device.

MotionProtect Outdoor turns off automatically after 6 seconds, if it failed to

connect to the hub. To retry the connection, you do not need to switch off the

device. If the detector has already been assigned to another hub, turn off

MotionProtect Outdoor, and then follow the standard addition procedure.

3. SelectAdd— the countdown will begin.

4. Switch on the device by pressing the on/off button for 3 seconds.

If the connection to the hub failed, repeat the connection attempt after 30

seconds.

The device connected to the hub will appear in the list of devices of the hub in

the app. The update of the detector statuses in the list depends on the device

ping interval set in the hub settings (the default value is 36 seconds).

To avoid masking alarms, switch off anti-masking in the device settings before the

installation!

States

1. Devices

2. MotionProtect Outdoor

Parameter Value

Temperature Temperature of the Detector. Measured on the

processor and changes gradually

Jeweller Signal Strength Signal strength between the hub and the

detector

Connection Connection status between the hub and the

detector

Battery Charge Battery level of the detector, displayed in

increments of 25%

Lid The tamper mode of the detector, which reacts

to the detachment of or damage to the body

Delay when entering, sec Delay time when entering

Delay when leaving, sec Delay period after the security system is armed

Routed Through ReX Displays the status of using the ReX range

extender

External Power Displays the status of using the external power

supply

Sensitivity Sensitivity level of the motion detector: low,

normal, high

Anti-masking Has the anti-masking option been enabled

Always Active When turned on, the motion detector always

detects movement

Firmware Detector rmware version

Device ID Device identier

Settings

1. Devices

2. MotionProtect Outdoor

3. Settings

Setting Value

First eld Detector name, can be edited

Room Selecting the virtual room to which the device is

assigned

Delay when entering, sec Selecting delay time when entering

Delay when leaving, sec Delay period after the security system is armed

Delays in night mode When enabled, the detector will experience a

delay in the night mode

Arm in night mode When turned on, the detector will switch to

armed mode when using night mode

Sensitivity

Choosing the sensitivity level of the motion

sensor:

Anti-masking If active, sensor will always detect masking

Always active When turned on, the detector always registers

motion

Alert with a siren if motion detected If active, and are

activated when the motion detected

Jeweller Signal Strength Test Switches the detector to the Jeweller signal

strength test mode

Detection Zone Test

Switches the detector to the detection area test:

Attenuation test Switches the detector to the signal fade test

High

Normal

Low

HomeSiren StreetSiren

General motion detector test

Upper motion detector test

Lower motion detector test

Masking sensor test (if anti-masking function is

enabled)

Altri manuali per MotionProtect

Indice

Altri manuali AJAX Sensore di sicurezza

AJAX

AJAX CombiProtect Manuale utente

AJAX

AJAX CombiProtect Fibra Manuale utente

AJAX

AJAX GlassProtect Manuale utente

AJAX

AJAX LeaksProtect Manuale utente

AJAX

AJAX MotionProtect Jeweller Manuale utente

AJAX

AJAX MotionProtect Manuale utente

AJAX

AJAX GlassProtect Manuale utente

AJAX

AJAX DoorProtect Plus Manuale utente

AJAX

AJAX GlassProtect Fibra Manuale utente

AJAX

AJAX FireProtect 2 (Heat) Jeweller Manuale utente

AJAX

AJAX MotionProtect Manuale utente

AJAX

AJAX LeaksProtect Manuale utente

AJAX

AJAX DoorProtect Manuale utente

AJAX

AJAX DoorProtect Manuale utente

AJAX

AJAX MotionCam PhOD Jeweller Manuale utente

AJAX

AJAX vhfBridge Manuale utente

AJAX

AJAX MotionCam Fibra Manuale utente

AJAX

AJAX MotionProtect Manuale utente

AJAX

AJAX CombiProtect Manuale utente

AJAX

AJAX FireProtect 2 Manuale utente

AJAX

AJAX GlassProtect Manuale utente

AJAX

AJAX FireProtect 2 (CO) Jeweller Manuale utente

AJAX

AJAX FireProtect Manuale utente

AJAX

AJAX LeaksProtect Manuale utente

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Satel

Satel OPAL Pro Manuale utente

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente