Akko 3068 BT5.0 Manuale utente

用户手册

User Manual

BT5.0

蓝牙版

311 x 102 x 40mm

Approximately 0.63KG

PBT Material

Bluetooth / Wired

Type-C To USB

1800mAh

YES

YES (use Akko Marco V1.0)

Mechanical Keyboard

China

3068 Technical Speciﬁcations

Dimensions

Weight

Keycap

Connection

Interface

Battery Capacity

Multimedia Keys

N-Key Rollover

Custom Keys

Type

Country of Origin

CtrlFn

3068 HotKeys

Cal

Insert

Home

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12

1 2 3 4 5 6 7 8 9 10 - =

End

M < > PgDn

PgUp

F1 - F10

F11

F12

Home

End

Fn+

1 - 0

PgUp

PgDn

Calculator

Insert

Mute

Decrease Volume

Increase Volume

Fn+ =

Revert Ctrl into Menu (APP) key

Swap W A S D with ↑↓ ← →

Fn+ W

Hold down FN and press right Ctrl

Ctrl

～

Press Fn and left Win key

Lock Windows Key

Hold down Fn and press ～ key

Restore Factory Settings

3068 System Commands

Win

～

3068 Backlight Settings

Bright

Dim

Slower Animation

Faster Animation

Light On/Oﬀ

17 Lighting Eﬀects

“↑”

“↓”

“←”

“→”

Del

Fn+ =

In Bluetooth mode, the light is turned

oﬀ by default for power saving.

Press Fn+L to turn on the light.

↑

Del

～

3068 Bluetooth Feature Overview

Wired Mode

Searching for device. The light will turn oﬀ after pairing is successful.

Switching device. The light will turn oﬀ after connection is established.

TAB LED

Cable Plugged-in Charging

Fully Charged

Bluetooth Mode/Cable Unplugged Flashing Light

Lights On

Lights Oﬀ

Fast Flashing

Slow Flashing

Power LED

Low Battery

3068 Bluetooth Setup Instruction 1

1.Switch to Bluetooth mode

Long press FN+Tab and the Tab LED ﬂashes. This means the Bluetooth mode is activated.

2.Set the Bluetooth proﬁle

The keyboard can memorize 4 switchable Bluetooth devices, which are saved in 4 Bluetooth proﬁles through

short-cuts Fn+E/R/T/Y (corresponds to BT1/BT2/BT3/BT4); When you ﬁrst use the keyboard, select a desired

Bluetooth proﬁle by pressing Fn+E/R/T/Y to initialize device searching ; Once it’s been setup and paired,

whenever you use the keyboard again, it would memorize the last Bluetooth device it has been worked on,

trying to send Bluetooth signal to communicate with the speciﬁc device.

3.Bluetooth Pairing

When you use your PC/ PAD/iPhone to pair with the keyboard, and the Bluetooth mode of the keyboard and

PC/PAD/iPhone have all been turned on, the keyboard would show up based on the Bluetooth proﬁle you set in

step 2 such as Akko 3068-BT1 / Akko 3068-BT2 / Akko 3068-BT3 / Akko 3068-BT4.

3068 Bluetooth Setup Instruction 2

4.Switch the Bluetooth device

After 4 Bluetooth devices have been paired with the keyboard, long press Fn+E / Fn+R / Fn+T / Fn+Y for at

least 3 seconds to quickly switch between them.

5.Shut oﬀ the keyboard

Turn the power oﬀ on the keyboard back panel while unused for power saving;

If the keyboard remains unused for over 10 mins, it would go to sleep mode and you can activate it by

pressing any key.

Note: The battery saver mode for Windows system would aﬀect/delay the sleep activation time of the keyboard.

6.Reset the keyboard

If you forgot the speciﬁc paired front-end device or if there remains disorder in Bluetooth conneciton and

communication, you can press Fn + ~ to reset the keyboard. This action erases all pairing information stored

in your keyboard.

Akko Macro V1.0

Macro Setup Instruction 1

1. Akko Macro V1.0 is hardware-based and works without software-driven.

2. The following keys cannot be programmed: "Esc", "Fn" and "Left Win".

3. Akko Macro V1.0 does not support simultaneous trigger, that is, pressing "AB" at the same time will trigger the

two keys in the order of A followed by B.

4. Akko Macro V1.0 does not support customized interval time, that is, the trigger interval between key A and key

B cannot be deﬁned and will follow the system's default trigger time.

Akko Macro V1.0

Macro Setup Instruction 2

Enter Macro Mode Start Macro Editor Macro Recording Fn + Custom Key

Exit Macro EditorExit Macro Mode

Fn + Custom Key

Record the next Key

Back to Default Mode Fn+Esc

Long Press Fn +Left Win Fn+Esc (End Recording)(Press Keys to Store)

Clear Macro：

If a key has been deﬁned, after entering the Macro editor, you can press “FN + the key” to

clear its deﬁnition.

If you want to re-customize that key, press “FN + the key”again to start the new Macro

recording after clearing its old deﬁnition.

Indice

Manuali Tastiera popolari di altre marche

Vortexgear

Vortexgear POK3R Manuale utente

Razer

Razer RZ03-0188 Manuale utente

Logitech

Logitech RUGGED LITE Manuale utente

Honeywell

Honeywell ADEMCO 5839 Istruzioni per il montaggio

Hama

Hama AK-120 Manuale utente

Rodgers

Rodgers RK-76 Manuale utente

Logic Controls

Logic Controls KB5000 Series Manuale utente

Rapoo

Rapoo E9270P Manuale utente

iKey

iKey DP-88 Manuale utente

Logitech

Logitech G413 TKL SE Istruzioni di montaggio

Keychron

Keychron C1 Manuale utente

Dahua

Dahua NKB Manuale utente

Ultimate Technology

Ultimate Technology 500 POS Manuale utente

Ducky

Ducky Shine 5 Manuale utente

Mace

Mace MACALLY MERGOKEY Manuale utente

iKey

iKey KYB-42-KIOSK Manuale utente

Viper

Viper V770 Manuale utente

Belkin

Belkin FastFit KEYBOARD COVER Manuale utente