Alcatel-Lucent 1850 Guida utente

Alcatel-Lucent 1850

Transport Service Switch (TSS-5) | Release 5.1

Installation and System Turn-Up Guide

365-372-403R5.1

CC109687848

ISSUE 1

NOVEMBER 2008

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.

The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.

Conformance statements

Interference Information: Part 15 of FCC Rules

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy. If the equipment is not installed and used in accordance with the guidelines in this document, the

equipment may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case the user will be required to correct the interference at the expense of the user.

Security statement

n rare instances, unauthorized individuals make connections to the telecommunications network through the use of remote access features. In such an event,

applicable tariffs require that the customer pay all network charges for traffic. Alcatel-Lucent cannot be responsible for such charges and will not make any

allowance or give any credit for charges that result from unauthorized access.

Limited warranty

For terms and conditions of sale, contact your Alcatel-Lucent Account Team.

Developed by Alcatel-Lucent

iii

365-372-403R5.1

Issue 1 November 2008

............................................................................................................................................................................................................................................................

Contents

About this document

Purpose ........................................................................................................................................................ xi

Reason for reissue ....................................................................................................................................... xi

Intended audience ........................................................................................................................................ xi

How to use this document ........................................................................................................................... xi

Safety information ....................................................................................................................................... xi

Conventions used ........................................................................................................................................ xii

Related documentation ............................................................................................................................... xii

Training ..................................................................................................................................................... xiii

Document support ......................................................................................................................................xiv

Technical support .......................................................................................................................................xiv

How to order ...............................................................................................................................................xiv

How to comment ........................................................................................................................................xiv

Packaging collection and recovery requirements .......................................................................................xiv

Recycling/take-back/disposal of product ...................................................................................................xiv

1Safety

Laser safety ............................................................................................................................................... 1-2

Laser product classification ....................................................................................................................... 1-4

Electrostatic discharge ESD considerations .............................................................................................. 1-6

Optical specifications .............................................................................................................................. 1-10

Part I: Physical and power installation

2 Physical installation

Planning ..................................................................................................................................................... 2-3

Inspection .................................................................................................................................................. 2-4

Alcatel-Lucent 1850 TSS-5 rack-mount shelf installation ........................................................................2-5

Description .............................................................................................................................................. 2-12

Power cable installation ........................................................................................................................... 2-13

Powering .................................................................................................................................................. 2-16

Contents

iv 365-372-403R5.1

Issue 1 November 2008

3 Cable and fiber installation

DS1/E1 cable installation .......................................................................................................................... 3-3

DS3/E3 cable Installation ........................................................................................................................ 3-10

Ethernet cable installation ....................................................................................................................... 3-13

Office alarm cable installation ................................................................................................................ 3-19

Miscellaneous (environmental) discrete telemetry cable installation ..................................................... 3-22

Timing cable installation ......................................................................................................................... 3-25

OC-3/STM-1 and OC-12/STM-4 main optical fiber cable installation .................................................. 3-27

10/100/1G cable installation ................................................................................................................... 3-29

RS-232 cable assembly ........................................................................................................................... 3-32

LAN cable installation ............................................................................................................................ 3-35

Final operations ....................................................................................................................................... 3-37

4 Circuit pack installation

Initial circuit pack installation ................................................................................................................... 4-3

Install PTM (pluggable transmission modules) ...................................................................................... 4-11

Part II: Stand-alone installation tests

5 Stand-alone node set-up

Circuit pack compatibility ......................................................................................................................... 5-2

Circuit pack installation ............................................................................................................................ 5-4

Software installation ................................................................................................................................. 5-9

Use of WaveStar®CIT software .............................................................................................................. 5-10

6 Stand-alone installation testing

LBO software settings ............................................................................................................................... 6-2

Clearing alarms ......................................................................................................................................... 6-8

Local equipment and cross-connect tests ................................................................................................ 6-10

LED test .................................................................................................................................................. 6-34

Office alarm test ...................................................................................................................................... 6-35

Miscellaneous (environmental) discrete telemetry test ........................................................................... 6-38

Final operations ....................................................................................................................................... 6-41

Contents

365-372-403R5.1

Issue 1 November 2008

Part III: Network turn-up and testing

7 Connecting adjacent network elements

Fiber installation ........................................................................................................................................ 7-2

OC-3/STM-1/OC-12/STM-4 optical transmission test ............................................................................. 7-7

Automatic protection switching test .......................................................................................................... 7-8

Manual switching tests ............................................................................................................................ 7-10

Final operations ....................................................................................................................................... 7-12

Cover installation for Alcatel-Lucent 1850 TSS-5 .................................................................................. 7-14

Part IV: Miscellaneous detailed installation procedure and reference

material

A Technical support

Technical assistance ................................................................................................................................. A-2

Accessing and navigating the On-Line Customer Support (OLCS) web site .......................................... A-7

Other technical support services ............................................................................................................ A-12

B Fiber cleaning

Equipment requirements and recommendations .......................................................................................B-2

Safety instructions .....................................................................................................................................B-3

Cleaning/inspecting optical connectors .....................................................................................................B-4

C PTM installation

PTM modules ............................................................................................................................................C-2

Install pluggable optics ..............................................................................................................................C-5

D Installing fiber connectors and LBOs

LBOs ........................................................................................................................................................ D-2

Fiber connections ..................................................................................................................................... D-5

E Backplane pin replacement

Pin and connector background ..................................................................................................................E-2

Repair kits and tools ..................................................................................................................................E-4

Simple repair methods ...............................................................................................................................E-5

Replacement methods ...............................................................................................................................E-7

F Fiber labeling

Fiber description ........................................................................................................................................F-2

Fiber labels ................................................................................................................................................ F-4

Contents

vi 365-372-403R5.1

Issue 1 November 2008

GL Glossary

Acronyms and Abbreviations ................................................................................................................. GL-1

Terms and Definitions .......................................................................................................................... GL-15

IN Index

vii

365-372-403R5.1

Issue 1 November 2008

List of figures

1Safety

1-1 Static control wrist strap ............................................................................................................... 1-7

2 Physical installation

2-1 VLIU faceplate latches ................................................................................................................. 2-7

2-2 Fully seated VLIU interface panel ............................................................................................... 2-7

2-3 VLIU captive screws .................................................................................................................... 2-8

2-4 Alcatel-Lucent 1850 TSS-5 rack-mount shelf ............................................................................. 2-8

2-5 Mounting bracket position for 19-inch frame .............................................................................. 2-9

2-6 Mounting bracket position for 23-inch frame .............................................................................. 2-9

2-7 Mounting bracket position for ETSI frame ................................................................................ 2-10

2-8 Power terminal block ................................................................................................................. 2-11

2-9 Power connections on rack-mount Alcatel-Lucent 1850 TSS-5 VLIU plug-in circuit pack ..... 2-16

3 Cable and fiber installation

3-1 VLIU1 DS1/E1 access panel cable connectors ........................................................................... 3-7

3-2 RJ-45 pin out for VLIU2/VLIU10 dual cable harness ................................................................ 3-8

3-3 VLIU2 DS1 RJ-45 port assignments ............................................................................................3-8

3-4 VLIU2/VLIU10 E1 RJ-45 port assignments ................................................................................ 3-8

3-5 VLIU10 paddle board ................................................................................................................. 3-9

3-6 DS1/E1 cable routing for VLIU Paddle boards ........................................................................... 3-9

3-7 DS3/E3 access panel connectors ................................................................................................ 3-11

3-8 DS3/E3 cable routing ................................................................................................................. 3-12

3-9 VLIU1 10/100BaseT port assignments ...................................................................................... 3-13

3-10 VLIU2 10/100 BaseT port assignments ..................................................................................... 3-15

3-11 VLIU2 10/100BaseT port assignments ...................................................................................... 3-15

3-12 VLIU MDI/MDO/alarm terminal block ..................................................................................... 3-20

3-13 VLIU MDI/MDO/alarm terminal block shelf view ................................................................... 3-21

3-14 Optical fiber routing ................................................................................................................... 3-28

3-15 VLIU 10/100BaseT cable routing .............................................................................................. 3-30

List of figures

viii 365-372-403R5.1

Issue 1 November 2008

4 Circuit pack installation

4-1 Rack-mount Alcatel-Lucent 1850 TSS-5 shelf front view ......................................................... 4-2

5 Stand-alone node set-up

5-1 WaveStar® CIT banner .............................................................................................................. 5-11

5-2 WaveStar® CIT login prompt .................................................................................................... 5-11

5-3 WaveStar® CIT legal notice ...................................................................................................... 5-12

5-4 WaveStar® CIT network view ................................................................................................... 5-12

5-5 Shelf Login ................................................................................................................................. 5-13

B Fiber cleaning

B-1 Cleaning the ferrule endface ........................................................................................................B-5

B-2 CLETOP cleaner ..........................................................................................................................B-6

B-3 Acceptability criteria for fiber cleaning .....................................................................................B-8

C PTM installation

C-1 Pluggable optics module ..............................................................................................................C-5

C-2 Module types ................................................................................................................................C-6

C-3 Latch type 3 (opened and closed) ................................................................................................C-7

C-4 Latch type 4 (opened and closed) ................................................................................................C-7

C-5 Insert optical module into socket .................................................................................................C-8

D Installing fiber connectors and LBOs

D-1 LC-type connector ports on circuit pack .....................................................................................D-2

D-2 LC-type LBO ...............................................................................................................................D-3

D-3 LC-type LBO inserted into LC-type connector port ...................................................................D-3

D-4 Removing LC-type LBO from LC-type connector port .............................................................D-4

D-5 LC-type Angled fiber connector ..................................................................................................D-5

D-6 LC-Type fiber connection ............................................................................................................D-6

365-372-403R5.1

Issue 1 November 2008

List of tables

1Safety

1-1 Laser classes ................................................................................................................................. 1-5

1-2 OC-3/STM-1 optical PTM specifications VLNC50/52 and VLNC64 ...................................... 1-10

1-3 OC-12/STM-4 optical PTM specifications VLNC50 and VLNC52 .......................................... 1-10

1-4 Ethernet PTM specification ........................................................................................................ 1-11

I-1 Part I installation checklist ........................................................................................................... 1-3

2 Physical installation

2-1 Shelf equipment packaging .......................................................................................................... 2-4

2-2 VLIU interface panel descriptions ............................................................................................... 2-5

2-3 Power cable assembly ................................................................................................................ 2-13

2-4 Power cable color coding for -48V connection .......................................................................... 2-14

2-5 Power cable color coding for +24V connection ......................................................................... 2-14

2-6 Alcatel-Lucent 1850 TSS-5 shelf power supply requirements .................................................. 2-16

3 Cable and fiber installation

3-1 Cable requirements and options ................................................................................................... 3-2

3-2 DS1/E1 cable assemblies ............................................................................................................. 3-3

3-3 Single harness DS1/E1 for VLIU1 applications .......................................................................... 3-5

3-4 Dual harness DS1/E1 for VLIU2 and VLIU10 applications ....................................................... 3-6

3-5 DS3/E3/E3 cable assemblies ...................................................................................................... 3-10

3-6 10/100 pin assignment for VLIU1 applications ......................................................................... 3-14

3-7 Dual harness 10/100 pin assignment for VLIU2 applications ................................................... 3-16

3-8 Ethernet 10/100BaseT straight through cable ............................................................................ 3-17

3-9 MDI/MDO/alarm cable assemblies ............................................................................................ 3-19

3-10 Office alarm connections ........................................................................................................... 3-19

3-11 MDI/MDO cable assemblies ...................................................................................................... 3-22

3-12 Miscellaneous (environmental) discrete (MDI/MDO) connections ........................................... 3-23

3-13 Timing cables ............................................................................................................................. 3-25

3-14 TMG cable assembly .................................................................................................................. 3-25

3-15 Serial CIT cable assembly .......................................................................................................... 3-32

List of tables

x365-372-403R5.1

Issue 1 November 2008

3-16 Standard CIT cable connection .................................................................................................. 3-32

3-17 RJ-45 to DB-9 connector connections ....................................................................................... 3-33

3-18 RS-232 default settings .............................................................................................................. 3-34

3-19 Ethernet / LAN crossover cable ................................................................................................. 3-35

3-20 LAN cross-over cable connections ............................................................................................ 3-35

3-21 LAN straight-through cable connections ................................................................................... 3-36

4 Circuit pack installation

II-1 Part II installation checklist ......................................................................................................... 4-1

5 Stand-alone node set-up

5-1 Main slot VLIU compatibility .................................................................................................... 5-2

5-2 LBOs for OC-n/STM-n lines ....................................................................................................... 5-8

6 Stand-alone installation testing

6-1 DS1 LBO values for the VLNC50, VLNC52, VLNC60, VLNC61 ............................................ 6-2

6-2 VLNC60/61 default RS-232 settings ..........................................................................................6-4

6-3 DS3/E3 LBO values ..................................................................................................................... 6-6

6-4 VLNC40/42 default RS-232 settings ........................................................................................ 6-23

6-5 VLNC60/61 default RS-232 settings ........................................................................................ 6-29

6-6 VLNC64 default RS-232 settings .............................................................................................6-32

6-7 Office alarm connections ........................................................................................................... 6-35

6-8 Miscellaneous (environmental) discrete in (MDI); miscellaneous discrete out

(MDO) connections ................................................................................................................... 6-38

III-1 Part III installation checklist ........................................................................................................ 6-1

B Fiber cleaning

B-1 Required and recommended equipment and materials ................................................................B-2

E Backplane pin replacement

E-1 Backplane locations of METRAL™ pins .................................................................................... E-3

E-2 Metral™ pins ............................................................................................................................... E-4

Altri manuali per 1850

Indice

Altri manuali Alcatel-Lucent Interruttore

Alcatel-Lucent

Alcatel-Lucent 1850 TSS-320 Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniAccess 4504 Manuale utente

Alcatel-Lucent

Alcatel-Lucent SFP Manuale utente

Alcatel-Lucent

Alcatel-Lucent 060321-10, Rev. B Manuale di istruzioni

Alcatel-Lucent

Alcatel-Lucent 8340 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-7 Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 10K Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6560 Series Manuale di installazione

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6250 Manuale di programmazione

Alcatel-Lucent

Alcatel-Lucent 7210 SAS-T Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6850-48 Manuale di programmazione

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6350 Manuale di installazione

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6850-48 Manuale di installazione

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6800 Series Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 1677 SONET Link Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6850-48 Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6900 Manuale di installazione

Alcatel-Lucent

Alcatel-Lucent 7250 SAS Manuale utente

Alcatel-Lucent

Alcatel-Lucent 1850 TSS-3 Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6800 Series Manuale di programmazione

Alcatel-Lucent

Alcatel-Lucent OmniSwitch AOS Release 7 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7210 SAS-X Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7210 SAS E OS Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuale utente