Alcatel-Lucent OmniSwitch 10K Manuale utente

060309-10, Rev. A

October 2010

OmniSwitch®10K

Getting Started Guide

Attention.

Only personnel knowledgeable in basic electrical and echanical procedures should install or aintain this equip ent.

The features and specifications described in this guide are subject to change without notice.

without the express written per ission of Alcatel-Lucent.

O niSwitch

Alcatel-Lucent

and the Alcatel-Lucent logo are registered trade arks of Alcatel-Lucent. WebView™

is a trade ark of Alcatel-Lucent.

Alcatel-Lucent

26801 West Agoura Road

Calabasas, CA 91301

(818) 880-3500 FAX (818) 880-3505

US Customer Support: (800) 995-2696

International Customer Support: (818) 878-4507

Internet: service.esd.alcatel-lucent.com

October 2010 iii

OmniSwitch 10K . . . . . . . . . . . . . . . . . . . . . . . . 1

Related Docu entation . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installing the Hardware . . . . . . . . . . . . . . . 3

Ite s Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Environ ental Require ents . . . . . . . . . . . . . . . . . . 3

Electrical Require ents . . . . . . . . . . . . . . . . . . . . . . 3

Unpacking and Installing the Switch . . . . . . . . . . . . . . . 4

Ite s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Weight Considerations . . . . . . . . . . . . . . . . . . . . . . . 4

Lifting the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Airflow Considerations . . . . . . . . . . . . . . . . . . . . . . 5

Mounting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Optional Rack-Mounting Hardware . . . . . . . . . . 6

Standalone (Non-Rack Mounted) Installations . . . . 6

Installing Chassis Co ponents . . . . . . . . . . . . . . . . . . . . 7

Blank Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing CMM, CFM and NI Modules . . . . . . . . . . 7

Installing Transceivers . . . . . . . . . . . . . . . . . . . . . . . 8

Installing Fan Trays . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing Power Supplies . . . . . . . . . . . . . . . . . . . . . 9

Connections and Cabling . . . . . . . . . . . . . 11

Serial Connection to the Console Port . . . . . . . . . . . . . . 11

Serial Connection Default Settings . . . . . . . . . . . . . . . . 11

Ethernet Manage ent Port Cable Require ents . . . . . . 11

Booting the Switch . . . . . . . . . . . . . . . . . . . . . . 12

Co ponent LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Table of Contents

iv October 2010

Your First Login Session. . . . . . . . . . . . . . . 13

Logging In to the Switch . . . . . . . . . . . . . . . . . . . . . . . . 13

Setting IP Address Infor ation for the EMP . . . . . . . . 14

Unlocking Session Types . . . . . . . . . . . . . . . . . . . . . . . 15

Changing the Login Password . . . . . . . . . . . . . . . . . . . . 16

Setting the Syste Ti e Zone . . . . . . . . . . . . . . . . . . . 16

Setting the Date and Ti e . . . . . . . . . . . . . . . . . . . . . . . 16

Setting Optional Para eters . . . . . . . . . . . . . . . . . . . . . 17

Specifying an Ad inistrative Contact . . . . . . . . . . 17

Specifying a Syste Na e . . . . . . . . . . . . . . . . . . . 17

Specifying the Switch’s Location . . . . . . . . . . . . . . 17

Viewing Your Changes . . . . . . . . . . . . . . . . . . . . . . . . . 17

Saving Your Changes . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using WebView . . . . . . . . . . . . . . . . . . . . . . . . . 18

Logging In to WebView . . . . . . . . . . . . . . . . . . . . . . . . 18

Navigating WebView . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting WebView . . . . . . . . . . . . . . . . . . . . . . 19

vOctober 2010

October 2010 OmniSwitch 10K 1

OmniSwitch 10K

OmniSwitch 10K Front Panel

The Alcatel-Lucent O niSwitch 10K (OS10K) is a high-

capacity, high-perfor ance odular Ethernet LAN switch

based on the state-of-the-art Alcatel Operating Syste (AOS).

The OS10K’s class-leading low-power consu ption, front-to-

back cooling, co pact for -factor, and all front-accessible

co ponents ake it a perfect fit for data center applications,

as well as a long-ter upgrade for legacy core platfor s.

2 OmniSwitch 10K October 2010

Related Documentation

The following user docu entation is provided for the

O niSwitch 10K.

•

OmniSwitch 10K Getting Started Guide

Describes the procedures for getting an O niSwitch

10K up and running. Also provides infor ation on

funda ental aspects of hardware co ponents and

basic setup co ands.

•

OmniSwitch 10K Hardware Users Guide

Technical specifications and procedures for the

O niSwitch 10K chassis, power supplies, fans,

Chassis Manage ent Modules (CMMs), Chassis

Fabric Modules (CFMs) and Network Interface (NI)

odules.

•

OmniSwitch CLI Reference Guide

Co plete reference to all CLI co ands supported on

the O niSwitch 10K. Includes syntax definitions,

default values, exa ples, usage guidelines, and

CLI-to-MIB variable appings.

•

OmniSwitch AOS Release 7 Switch anagement Guide

Includes procedures for readying an individual switch

for integration into a network. Topics include software

directory architecture, i age rollback protections,

authenticated switch access, anaging switch files,

syste configuration, SNMP, and WebView

anage ent software.

•

OmniSwitch AOS Release 7 Network Configuration

Guide

Includes network configuration procedures and

descriptive infor ation on all the ajor software

features and protocols included in the base software

package. Chapters cover Layer 2 infor ation (Ethernet

and VLAN configuration), Layer 3 infor ation

(routing protocols, such as RIP and VRRP), security

options (authenticated switch access), Quality of

Service (QoS), link aggregation, and server load

balancing.

•

OmniSwitch AOS Release 7 Advanced Routing

Configuration Guide

Includes network configuration procedures and

descriptive infor ation on advanced routing protocols

such as OSPF, BGP, DVMRP and PIM-SM.

•

OmniSwitch AOS Release 7 Transceivers Guide

Includes infor ation on S all For Factor Pluggable

(SFP) and 10 Gbps S all For Factor Pluggable

(SFP+) transceivers.

October 2010 Installing the Hardware 3

Items Required

•

Grounding wrist strap (included)

•

Phillips screwdriver

•

Flat-blade screwdriver

•

Serial cable

Site Preparation

Environmental Requirements

O niSwitch 10K switches have the following environ ental

and airflow require ents:

•

The installation site ust aintain a te perature

between 0° and 45° Celsius (32° and 113° Fahrenheit)

and not exceed 95 percent axi u hu idity (non-

condensing) at any ti e.

•

Be sure to allow adequate roo for proper air

ventilation at the front, back, and sides of the switch.

Refer to “Mounting the Switch” on page 5 for

ini u clearance require ents. No clearance is

necessary at the top or botto of the chassis.

Electrical Requirements

O niSwitch 10K switches have the following general

electrical require ents:

•

Each switch requires one grounded electrical outlet for

each power supply installed in the chassis.

O niSwitch 10K switches offer both AC and DC

power supply support. Refer to the OmniSwitch 10K

Hardware Users Guide for ore infor ation.

•

For switches using AC power connections, each

supplied AC power cord is 2 eters (approx. 6.5 feet).

Do not use extension cords.

Redundant AC Power. It is reco ended that each AC

outlet resides on a separate circuit. With redundant AC, if

a single circuit fails, the switch’s re aining power

supplies (on separate circuits) can re ain operational.

•

For switches using DC power, refer to the OmniSwitch

10K Hardware Users Guide for ore infor ation.

Installing the Hardware

4 Installing the Hardware October 2010

Unpacking and Installing the Switch

To protect your switch co ponents fro da age, read all

unpacking reco endations and instructions carefully before

beginning.

Unpack your O niSwitch 10K chassis as close as possible to

the location where it will be installed.

Items Included

Your O niSwitch 10K includes the following ite s:

•

O niSwitch chassis with factory-installed power

supplies, per order

•

CMM odule(s), per order

•

CFM odule(s), per order

•

NI odules, per order

•

Transceivers, per order

•

Blank cover panels, if applicable

•

Grounding wrist strap

•

RJ45-to-DB9 console adapter

•

Country-specific power cord(s)

•

Hard copy of the OmniSwitch 10K Getting Started

Guide

Weight Considerations

The e pty O niSwitch 10K chassis weighs approxi ately

46 lbs (21 Kgs). When fully populated (i.e., with co ponents

installed in all available chassis slots), the O niSwitch 10K

can weigh up to approxi ately 200 lbs (90.5 Kgs).

Lifting the Chassis

Lifting the chassis requires two people. When lifting, use the

recessed hand grip provided on the rear panel and the

reinforced area i ediately under the front air intake plenu .

Chassis Cross Section

Note. Lifting the O niSwitch 10K chassis i properly can

cause personal injury and/or da age to the unit.

Grip

Altri manuali per OmniSwitch 10K

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Alcatel-Lucent Interruttore

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6900 Manuale di installazione

Alcatel-Lucent

Alcatel-Lucent 7210 SAS E OS Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6850E Series Come usare

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6600 Family Manuale di installazione

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6800 Series Manuale utente

Alcatel-Lucent

Alcatel-Lucent 1850 TSS-100 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7210 SAS-T Manuale utente

Alcatel-Lucent

Alcatel-Lucent LambdaUnite 1675 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 1850 TSS-320 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7210 SAS E OS Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6800 Series Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7210 SAS E OS Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniAccess 4504 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7950 SR Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 9800E Manuale di installazione

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6850-48 Manuale di istruzioni

Alcatel-Lucent

Alcatel-Lucent 7670 RSP Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7210 SAS E OS Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6850-48 Manuale di programmazione

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6250 Manuale di istruzioni

Alcatel-Lucent

Alcatel-Lucent 4306G Series Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 Manuale di programmazione

Alcatel-Lucent

Alcatel-Lucent OmniAccess 4504 Manuale utente

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6350 Manuale di installazione

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuale utente