Alert 450R Manuale utente

. .

WARRANTY

Alert Warranty Information

Product warranty returns must only be submitted by an

authorized dealer.

All Alert models have a Limited Lifetime Warranty on the

main control module.

All parts excluding the control module have a two year

warranty against defects in workmanship. This includes the

shock sensors remote transmitters and sirens. The control

module will be repaired or replaced at our discretion for up

to a 24 month period at no charge. After 24 months a $30.00

fee will be charged for repair or replacement of the control

module.

Removal and reinstallation charges are not the responsibility

of JBS Technologies LLC the manufacturer of Alert. Warranty

registration must be completed within 14 days of the original

date of purchase. Registration can be mailed in or performed

on line at www.alertautomotive.com. JBS Technologies makes

no warranty against the theft of a vehicle or its contents.

This warranty only extends to the original system purchaser

and the vehicle it was originally installed on.

Limitation of Remedies

The purchasers remedy is limited to the repair or replacement

of the unit and in no event shall exceed the purchase price.

Incidental consequential and or indirect damages are expressly

disclaimed. No person or entity is authorized to alter or

amend this limited lifetime warranty.

. .

TABLE OF CONTENTS

OPERATIONS:

A. REGULAR TRANSMITTER OPERATION ...............................................4

B. LED DESPLAY........................................................................................ 4

C. CHIRP INDICATORS .............................................................................. 4

D. PARKING LIGHTS ...................................................................................4

E. ALARM OPERATING CONDITION..........................................................5

F. ACTIVE LOCK AND ARM ........................................................................5

G. ACTIVE UNLOCK AND DISARM.............................................................5

H. DISARMING WITHOUT A TRANSMITTER..............................................5

I. VALET MODE ..........................................................................................6

J. PANIC FUNCTION................................................................................6-7

K. DOME LIGHT SUPERVISION .................................................................7

L. IGNITION CONTROLLED DOOR LOCKS...............................................7

M. CHANNEL 3 TRUNK RELEASE) OUTPUT ............................................7

N. CHANNEL 4 OUTPUT .............................................................................7

O. CAR FINDER ...........................................................................................7

REMOTE START OPERATION:

WARNINGS ............................................................................................................. 8

A. HOW TO REMOTE START VEHICLE .....................................................8

B. HOW TO PROGRAM REMOTE START

FOR MANUAL TRANSMISSIONS ...........................................................9

C. HOW TO TURN OFF REMOTE START.................................................10

D. HOW TO OPERATE VEHICLE

WHILE RUNNING IN REMOTE START MODE.....................................10

E. PIT STOP MODE ...................................................................................10

F. TURBO COOL DOWN TIMER MODE ..............................................10-11

G. TIMER START........................................................................................11

H. SHUT-DOWN INPUT FOR REMOTE STARTER...................................12

I. DISABLING THE REMOTE STARTER SYSTEM ..................................12

REMOTE CONTROL OPERTIONS:

BASIC FUNCTIONS ...................................................................................13

450OM 6/04

. .

A. REMOTE TRANSMITTER OPERATION:

Transmitter

Button System Function or Feature Remark

Lock Doors & Arm the Security System

Car Locator Works when arme only

(3 sec.) Panic function Press an hol for 3 sec.

Unlock Doors & Disarm System

- Two Steps Door Unlock & Disarm System Press twice within 3 sec.

Silent Doors Lock Unlock

(2 sec.)

Trunk Release (Channel 3) Press an hol for 2 sec.

Remote Control Entry Exit Valet Mode While system is isarme ,

Press within 3 sec.

+ Channel # 4 Timer Output

- Activate or Turn Off the Remote Start Press twice within 3 sec.

OPERATION

B. LED Status Display Chart: C. Chirp In icators

LED Function Chirp Function

Off Disarmed 1 chirp Arm

Slow Flash Armed 2 chirps Disarm

Fast Flash Passive Arming 6 chirps Car Locator

On (solid) Valet Mode

D. Parking Light In icator Display Chart:

1 Flash Arm

2 Flashes Disarm

12 Flashes Car Locator

Constant On Under Remote Start Operation

. .

OPERATION

E. ALARM OPERATING CONDITION:

Parking

Horn Light LED Doors Starter Dome Light

1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable

2. Disarming 2 Chirps 2 Flashes Off Unlocking urns on for 30 sec.

3. Panic Alarming Flashes Flashes

4. Car Locator 6 Chirps 12 Flashes

F. ACTI E LOCK & ARM:

1. Press the button on the transmitter.

2. he horn will chirp (1) time and parking lights will flash (1) time and

then remain on for 10 seconds indicating that the system is now

armed. he vehicles doors will lock upon arming when interfaced with

the security systems keyless entry.

SILENT ARMING / DISARMING: Pressing the and the buttons at

the same time on the transmitter will arm or disarm your security system.

No chirping sound will be heard, arm and disarm confirmation will be through

the vehicles parking lights only.

G.ACTI E UNLOCK & DISARM:

1. Press the button on the transmitter.

2. he horn will chirp (2) times and parking lights will flash (2) times

and remain on for 30 seconds to indicate that the security system

is now disarmed. he doors will unlock and dome light will turn on and

remain on for 30 seconds upon disarming when interfaced with the security

system.

TWO STEP DOOR UNLOCK his feature will independently unlock the

drives door only when disarming the security system. Pressing the

button a second time within 3 seconds will unlock the entire vehicle.

H. DISARMING WITHOUT A TRANSMITTER

he Override function may be used if the remote transmitter is lost or is

inoperative.

1. Enter the vehicle and insert the key into the ignition switch and turn it

to the ON position.

2. Within 10 seconds, press and release the valet switch.

he alarm will enter the disarm mode. You can now start and operate

the vehicle with the ignition key.

. .

I. VALET MODE: (System in Disarmed or Valet Mode)

The valet/program s itch allows you to temporarily bypass all alarm

functions, eliminating the need to hand your transmitter to parking attendants

or garage mechanics. When the system is in Valet Mode, all alarm

functions and remote starter functions are bypassed, however the remote

panic feature and remote door locks will remain operational from the remote

control. To use the Valet Mode, the system must first be disarmed either

by using you remote transmitter, or by operating the manual override

sequence.

To Enter Valet Mode:

1. With the system in disarmed mode, turn the ignition key to the ON

position.

2. ress and hold valet/program s itch for 2 seconds or until the LED

turns on. The LED will remain on for as long as the system is in Valet

Mode.

To Exit Valet Mode:

1. To return to normal operation, turn ignition key to the ON position.

2. ress and hold the valet/program s itch for 2 seconds, The LED will

turn off,indicating the system has exited the Valet Mode.

REMOTE VALET: (System in Disarm or Valet Mode)

ress and release the button on the transmitter (3) three times within

3 seconds to enter / exit valet mode.

The parking lights will flash (1) time to confirm entering of Valet Mode

and (2) parking light flashes to confirm the exiting of Valet Mode.

J. PANIC FUNCTION:

The transmitter can be used as a remote panic button, to manually trigger

the panic alarm in case of emergency.

1. ress and hold the button for 3 second. The alarm will immediately

sound in Panic Mode.

2. During Panic Mode, the normal functions of the transmitter buttons

will be suspended. The and buttons can be used to lock and unlock

the doors (if the option is installed), however once the button is

pressed, the vehicles starter disable device, (if installed) will be enable

allowing the vehicle to start.

OPERATION

. .

OPERATION

3. To stop the Panic Mode, press and hold the or buttons on the

transmitter for 3 seconds. Also if any transmitter buttons other than

or button is pressed and released, the panic mode will be turned off

immediately.

4. If the button is not pressed, the Panic Mode will automatically stop

after 30 seconds.

K. DOME LIGHT SUPER ISION

The system has a unique feature which will turn on your vehicle s dome

light as follows:

1. After disarming, the dome lights will remain on for 30 seconds (if

connected).

2. If the vehicle is intruded, the dome light will flash for the same duration

as the siren.

Note: Turning on the ignition switch or arming the alarm will turn

off the dome light.

L. IGNITION CONTROLLED DOOR LOCKS.

If the vehicles door locks have been interfaced with the unit s keyless entry,

the system will automatically lock the vehicle's doors when the ignition is

turned ON and will unlock the vehicle s doors when the ignition is turned

OFF.

M. CHANNEL 3 (TRUNK RELEASE) OUTPUT

Press and hold the button on transmitter for two seconds to control the

trunk release or other electric devices that have been added to this output.

N. CHANNEL 4 OUTPUT (See Alarm Feature 1  4/5 Programming)

Press the and the buttons at the same time to control the optional

electrical device. The connected device will turn on, when the button(s) are

press continuously, and turn off, when the button(s) are released.

O. CAR FINDER

Press the button twice to active the Car Finder function. The siren

will chirp 6 times. The parking light will flash 12 times, this feature will

help you find your vehicle in a crowded parking lot.

. .

WARNINGS:

As with any product that performs automatic functions, there are certain

safety precautions that you must practice and be aware of.

1. Keep all transmitters out of the reach of children.

2. Do not leave anyone in the vehicle while in Remote Start ode.

3. Alert servicing personnel that the vehicle is equipped with a Remote

Starter.

4. Do not start the vehicle by remote while its in an enclosed area or garage.

5. Always apply the parking brake and lock the vehicle when you exit the

vehicle.

6. Should the unit malfunction, disconnect the fuse until the problem is

corrected.

7. The use and operations of this system is the sole responsibility of the

operator.

8. Some areas may have local ordinances that prohibit leaving a vehicle

running on public streets.

IMPORTANT NOTICE

REMOTE START OPERATION

A. TO REMOTE START THE VEHICLE:

When you want to remote start your vehicle,

1. Press the button twice on the transmitter.

2. The parking lights will flash to indicate the remote starter has received

the signal.

3. The engine will start in approximately 5 seconds.

4. Once the engine is running, after a few seconds the parking lights will

turn on and Heater/AC will activate and adjust the vehicles interior

temperature to your preset setting.

5. The vehicle will remote start and run for 5 to 30 minutes and automatically

shut down after the preset run time expires.

NOTE: The Remote Starter will not start the vehicle if any one of the

following conditions exists:

1. If the hood is opened.

2. If the brake pedal is pressed.

3. You moved the optional remote starter enable toggle switch to OFF

position. (If installed)

4. If the gear selector is in any gear other then PAR  or NEUTRAL

5. Release the Emergency brake. (For anual Transmission Vehicles)

. .

SAFE START (Child safety mode) (See Start Feature 1  5 Programming.)

Factory default settings to press the button twice on the transmitter to

remote start the vehicle. Programming this feature to eliminate an accidental

remote starts.

This requires the user to press the transmitters and buttons at the

same time to remote start the vehicle.

REM TE START PERATI N

B. ENGINE START PR GRAMMING F R VEHICLES WITH MANUAL

TRANSMISSI NS (Cut the VI LET L P wire for a manual transmission

vehicles)

The control module senses the neutral safety switch position on a automatic

transmission vehicle and no prior set up required. The system for the manual

transmission vehicles follows this process when you exit the vehicle to sense

and memorize the neutral safety switch position. If the vehicle has a automatic

transmission, this process is omitted.

1. While the engine is running with the ignition key, set the emergency

brake and place the manual transmission in the neutral position.

2. Before turning off the engine, press the button twice on the transmitter.

The LED indicator will flash 3 times to confirm it has been entered.

3. Turn off the Ignition Key and remove it from the ignition switch.

The engine should continue running until the pre programmed time has

elapsed or the shutdown input is received.

4. Exit the vehicle and close all doors.

The engine should still continue running and this is a normal operating

procedure.

5. Within 1 minute from the time of step 1, press the button on the

transmitter to lock the doors.

6 1. If the engine shuts down immediately, the system is now ready for

remote engine starts.

6 2. If the engine does not shut down immediately, the system has failed.

Repeat the above process again.

If a door is opened after the above procedure, the prior memorization for

the next remote or programmed engine start sequence is deleted and the

remote start function will not work until you repeat the above process again.

Note: If the remote start programming is set up, the dome light supervision

function will be temporarily

By passed.

. .

C.TO TURN OFF THE REMOTE STARTER:

When the engine is running in (Remote Start Mode), if you want shut

down the engine:

1. Press the button twice on the transmitter, the engine will shut off.

2. Move the optional remote starter ena le toggle switch to the OFF

position. (If installed)

3. Press the rake pedal. The engine will shut down and the parking lights

will turn off to indicate engine has shut down.

D. TO O ERATE THE VEHICLE WHILE RUNNING ON THE REMOTE

START:

To operate the vehicle while running in Remote Start Mode.

1. Insert the ignition key into the ignition switch and turn it to the ON

(not the start) position.

2. Press the rake pedal.

Note: If the brake pedal is pressed before the key is in the ON

position, the engine will shut off.

E. IT STO FEATURE:

This feature allows the vehicle to remain running after the key has een

removed from the ignition switch. This feature is useful for occasions when

you wish to exit and lock the vehicle for short periods of time, ut would

like to leave the engine running and the Heater/AC control on.

1. Before turning off the engine, press the button twice on the transmitter

and the LED indicator will flash 3 times to confirm it has een entered.

2. Turn the ignition key to the OFF position. (The engine will stay running.)

3. The engine will remain running until the pre-programmed time elapsed

or a shutdown input is received.

F. TURBO COOL-DOWN TIMER MODE:

Tur o Cool Down timer mode keeps the engine running after arriving at you

destination for a programma le period of 1/ 3 or 5 minutes, This allows the

systems time to conveniently cool down the tur o after you have left the

vehicle. The time setting is programmed y the installer.

To activate:

1. While the engine is running, place the transmission in the park position

and apply the emergency rake.

REMOTE START O ERATION

Indice

Altri manuali Alert Telecomando

Alert

Alert 250r Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione