Alfano 6 Manuale utente
Manual (EN)
For more than 20 years, Alfano S.A. is major player in the Karting industry. After more than three
years of development and extreme testing in house or in colaboration with our partners in the
industry we are proud to release the Alfano 6.
Developped without compromises, the Alfano 6 is presently known as the best device on the
market according to the professionnals of the sector. The factory setup allows you to directly
enjoy your device with all the automatised features while letting you go deeper in the settings
and options (see additional products).
Alfano, we took the time to be
performant
In technical terms, the Alfano 6 it's :
• 2600 tracks in an ever expanding database
( consultable in Parameters > Track Consultation or on the Alfano 6 App)
• An automatised feature that recognize your track or create it
• The reception of three GPS satellite networks for worldwide coverage and ever higher
accuracy, Navstar USA, Glonass UK and Galileo EU (operational since November 2017)
• A battery with a very superior endurance (40 hours of use) to any other competitive products
rechargeable via a USB cable (provided) and allowing charging via a Powerbank if you do not
have access to a socket.
• A simple, intuitive Bluetooth connection linked to a powerful App that allows data analysis on
all iOS or Android platforms.
• The developers of Off Camber Data also offer PC analysis software compatible with your
Alfano 6.
1
Setup
L'Alfano 6 : The Alfano 6 is designed for installation on your steering wheel. You can
instal it in place using the screw thread on the back of the unit and the nut (supplied).
For a greater comfort of use and a reduction of vibrations pay attention to place on both
sides of your steering wheel the rubber washers (provided). The shell of your device
should not hit against your steering wheel, if needed you can use the black washer to
space out your device.
Before continuing your use of the Alfano 6 we recommend that you configure your
device according to your requirements and preferences to facilitate its use and any
future manipulations.
Info : You can get at any time more information directly on your Alfano 6 thanks
to the "info" option accessible by pushing the central right button of your Alfano 6
2
Settings
Usage preferences: to turn on your Alfano 6, press the button at the bottom right. Once
the Alfano 6 is running, we invite you to configure the various parameters available in
the menu represented by a gear
Language: Using the top and bottom buttons on the left of the device, navigate to the
Languages icon represented by the flags and select your language.
3
Settings
Units: In the submenu menu Settings (indicated by two crossed tools) you will find
the sub-menu "Units". You will be able to choose between kmh and mph, kilometers
and miles, degrees Celsius and Fahrenheit
Format - Time zone hour: In the Date and Time submenu you can select the format
that corresponds to your preference and time zone. This information is important to
help you find your data during their analyzes. As for the schedule, the GPS will
automatically adjust your Alfano 6.
Your visual preferences: In the Settings menu, enter Brightness sub-menu represented
by a lit bulb.
4
Viewing Configuration
By default the backlighting is activated automatically thanks
to a brightness sensor but you can choose to activate or
desactivate it permanently
Choose the color of your backlight according to your
preferences
Set the intensity of your backlight here
Set the intensity of the indicator lights on the top of your
device according to your preferences. These LEDs can show
you several types of information such as RPMs,
temperatures, lap times and more. You will find information
on this topic in the chapter "Display Course".
1. Backlighting :
2. Color:
3. Power :
4. LED Power :
Driver name: In the settings menu you can enter the names of the drivers (up to 6) on
the headset icon so that they appear on the home screen and in your datas.
Standby: In the settings menu you will find the sub-menu "Standby" where you can
set the time before stand-by (in minutes) as well as the idle time before the Alfano 6
stops.
While on standby, the Alfano 6 consumes almost no energy and will light up when an
RPM signal is received (see "The RPM Sensor" - page 7) or by pressing the "On /
Off" button ".
5
Connectivity and APP
For optimal use of your Alfano 6 you can connect
your device to its dedicated App. To do so,
download the application ALFANO 6 (Android or
iOS) on your smartphone or tablet and then pair it
with your device.
To do this, press the middle button on the right
labeled with the Bluetooth logo and activate your
application on your iOs or Android support (see the
section dedicated to the App)
You can also download the data of your
Alfano 6 with a USB cable (not supplied -
Ref: A4520) and read them on PC with Off
Camber Data (not supplied - paying)
6
You can connect your Android tablet to your Alfano 6 using a mini or
micro USB adapter (not included)
RPM
The RPM Sensor: In order to transmit to your
Alfano 6 the RPM signal of your engine it's
necessary to install the RPM sensor (ref A1600)
on your spark plug cable.
You can use the RPM sensor as shipped or, if the signal is too
weak, place turns around the cable as in the diagram above.
Then connect it to your Alfano 6 using the notch provided on
the left side of the back of the device
Configuring your Alfano 6: In your Parameters submenu, enter in the RPM sub-menu
your maximum RPM (according to your engine manufacturer's recommendations).
The most common value for "RPM Factor" is "x1"
Configuring your LEDs: In your "Display Config" sub-menu, enter the LED Indicator
submenu and select the "RPM Mode" feature. Here you can configure the color and
the corresponding RPM level of each LED.
7
Temperatures
Temperatures: Your Alfano 6 can read two
temperatures. These are connected to the red input on
your Alfano 6. If you want to simultaneously read the
two temperatures listed below, you will have to use a
Y-connector (ref: A2190) or Box12 (ref: A1160)
Water temperature: To install this sensor we recommend using the
location provided for this purpose on your engine or our hose
adapters and place the sensor in the space provided for this
purpose.
References Water Temperature Sensor: A2101, A2152
References Adapter Hoses: A261, A262, A263
In order to monitor the temperature of your engine, you can use one of the two LEDs alarms and set
a minimum and maximum temperature.
Configuring your alarms (LEDs): In your "Display Config" submenu, enter the Max or Mini
LED left (or right) alarm submenu. Here you can set the temperature type (in this case T ° 1
Water / Cylinder head) but also the maximum or minimum temperature, the color of the
LED and its display mode.
8
Indice
Altri manuali Alfano Timer
